Question about 2000 Jaguar S-Type

2 Answers

My 3.0l s type stalls out at low rpm even when driving

My 3.0l s type stalls out at low rpm, any idea's ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try lamda probe check

Posted on Feb 04, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Happened to mine.  Was a vacuum issue.  One small hose had a hole in it.  Replaced it for $3.00...The problem was, we had to find the hole first.  A hissing sound under the hood gave it away and we located it that way. 

Posted on Feb 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cluster all lights come on and gages fluctuate while driving


so what works and what not.
so far we have cluster issues
does car drive, ok day and night.
and all accessories?
did engine stall driving?
did Head lights dim? on, driving?
my guess is the engine stalled or idled below 300rpm
and the ECU went to Key on self test mode, (they all do that)
watch the RPM guage? see that needle, ?
if it goes below 300 rpm that is engine stall.
or worse
This cars cluster is really just a digital display
so if the PCM cant talk to the cluster, the cluster will go nuts.
for freeze.
We use a scan tool to see whats up.
or use the cluster self test covered in the shop manual.
the cluster has 2 fuses that can be cracked/loss or corroded.
the cars battery can go weak.
if the charge/battery light glows, engine RPM good
then the alternator systems is failing
if the volt meter (if opted) in cluster drops below 14v, and engine is still running, the same, alternator system failure
or even a loose belt at the alternator.
if the battery voltage drops too low , all electrics go nuts.
and engine stalls.
what dies first with low battery , is luck of the draw....
so what was battery voltage
and engine RPM at the point of failure.??????????

Feb 27, 2016 | 2011 Jeep Liberty

2 Answers

I got 1994 toyota andf it stall when i turn on anything like blinkers or headlight and when i put it in gear. Its a five speeed v-6 but it starts right up and idles but if i hit brake it sounds likeit


ok , i guess you are saying the engine stalls when I use heavy electrical loads (like head lamps or brakes or even blinkers)
and when you shift from park to drive.
ok , if the engine RPM is 800 before the stall, then that is a total loss
of engine power with lost of idle controls.

The big load is in DRIVE on automatics huge going to DRIVE.

if battery voltage (yes, a 10 buck walfart meter works) can see 13.3 to 15vdc idling at 800 or more RPm.
the Alternator does not work below 800 so , dont expect it to.

so, if rpm in park is below 800 then we fix that first, see why?
if idle drops below 800 this is caused buy many things.
one vital fact missing is you didnt say, if I drive it like a stole it.
that is aggressive right foot. , do you have full engine power, now?
ignoring stalls. (see my drift there, "is engine power good;?)

battery volts above 13.3vdc.
idle at 800 and stalls in DRIVE (shifted)
  • low fuel pressure.
  • never ever tuned up this decade, with all spark parts bad.
  • ISC stuck( idle speed controller (it lets in more air , in DRIVE)
  • low engine compression.
  • other complex ,fueling issues, (ask) and lots of tests. (ask)
if no tachmeter in car or tool box, repairs get dicey.
hard,
it takes tools to diagnose and fix cars.
go tools? or willing to buy them
if not,? get it serviced.

Dec 08, 2014 | 1994 Toyota Pickup

1 Answer

Speedometer not working low oil pressure light on and EPS light on


id not drive it or even run it with low oil pressure.. boom $3000 in to rat hole?
or did the engine stall. RPM goes to zero so does oil pressure.
all normal for a stall. did it stall????????
if not check fuses.
if did, diagnose stalling, ask !

Jan 19, 2014 | 2005 Honda Civic Hybrid

1 Answer

My 98 Jetta GL 2.0 has a very low idle


Every time you loose power to a throttle body(disconnect battery or unplug wire from throttle), you need to do throttle body adaptation , using appropriate scantool.

Jul 22, 2010 | 1998 Volkswagen Jetta

1 Answer

I have a 98 Montero Sport with low rpm engine stalls...


spark plug cable is lose or one spark plug is faulty.

Jan 24, 2010 | 1998 Mitsubishi Montero Sport

1 Answer

1996 Mercury Mystique 2.0L stalling


Drive it to Autozone or similar place and ask them to scan the car because the "check engine light is on". Most likely it will be a TPS switch. In area of $30 for part. It takes about 20 minutes to do. Most of time spent getting to part. But see what scan shows.

Aug 15, 2009 | 1998 Mercury Mystique

1 Answer

Mazda 6 gt 2005 will not start after stalling


Have the car exorcised at once!

Seriously, it sounds to me like you've managed to dislodge something while doing your audio work - or even inadvertently left behind a small tool; there, it could roll onto components and short across several components/gauges. I think you should carefully retrace your work and make sure nothing was dislodged or left behind!

Good luck; let me know how you get on!

Apr 28, 2009 | 2005 Mazda 6

2 Answers

1992 Toyota Camry Rough Idle


start by pulling hose off egr valve see if idles smoother almost instantly

Mar 17, 2009 | 1992 Toyota Camry V6

1 Answer

Rough idle stalls at low rpm's


hello first check your idle with the car running foot on brake see were your rpm reading is if your below 500rpm check your label underhood for your curb idle setting second see if theres a adjustment screw you can increase were your gas cable lever rest against your set screw underhood if you feel confident enough remove your iac motor idle air control valve if the bore were the end of the pintle extracts out to close has varnish builup our carbon it will stick creating vacuum leak type senario causing stalling rough idle sometimes even no start conditions good luck

Sep 14, 2008 | 1988 Honda Accord 4 Door

Not finding what you are looking for?
2000 Jaguar S-Type Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...