Question about 2006 Toyota Sienna

1 Answer

HOW DO YOU REPLACE THE BACK THREE SPARK PLUGS?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

Like most transverse V6 engines you must either A) take it to a auto shop and put it up in the air, or B) remove the front motor mounts, put the car in neutral, and use a floor jack to tilt the engine toward the grill.
DO NOT try this unless you are a seasoned mechanic !!!!!!!!!!!!!

Posted on Feb 03, 2010

  • rsbird Jul 16, 2011

    r u kidding me! basically u can't change them urself - REMOVE THE FRONT MOTOR MOUNTS to change the rear spark plugs! Obviously toyota is no longer is designing its vehicles w/ DIY maintenance. thank God their so reliable.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace spark plugs on a 2000 Oldsmobile Intrigue


On the 3.5 liter v-6, they are in two spots that have plugs. The first three are in the front of the engine. The second three in the back. They are under what is called the"ignition coil cassette". Right in front of the cover that says 3.5 liter is a piece that is about 4-5 inces wide with another piece on top of it about 2-3 inces wide. On the right of this piece you will find some wires plugging into it. The 3.5 liter does not have actual spark plug wires. The wires goto this cassette and this cassette lays on top of the spark plugs. There are seven screws to this cassette, four on top and three on bottom. Once you figure out the front, you will find the back set. However the back are a terror to get to. I had to replace all of the back plugs by feel

Oct 10, 2012 | 2000 Oldsmobile Intrigue

1 Answer

How do you get the back three spark plugs out to replace on a dodge caravan yr 2000


My information says to remove the windshield wiper/motor module assembly from the vehicle for access to the spark plugs on the firewall side. When We owned our '99 Grand Voyager, I put the front up on jack stands and got the back three plugs from underneath.

Feb 20, 2011 | 2000 Dodge Caravan

1 Answer

How to change the spark plugs on peugeot 406 v6 3l coupe is this straight forward like a 4 cylinder car


1. Spark plugs removal

1.1. Front cylinder bank spark plugs removal:
1.1.1. Disconnect the battery from car terminals.
1.1.2. Remove the engine plastic cover.
1.1.3. Disconnect the ignition coils electrical supply cable and all three coils connectors.
1.1.4. Remove all three ignition coils screws.
1.1.5. Remove all three ignition coils out from cylinder head.
1.1.6. Remove all three spark plugs out from cylinder head (straight forward).

1.2. Back cylinder head bank spark plugs removal:
1.2.1. Remove the inlet manifold out from cylinder head.
1.2.2. Disconnect all three ignition coils connectors.
1.2.3. Remove all three ignition coils screws.
1.2.4. Remove all three ignition coils out from cylinder head.
1.2.5. Remove all three spark plugs out from cylinder head (straight forward).

2. Spark plugs installation

2.1. Refit all in reverse order.
2.2. Spark plugs tightening torque = 2,8 +/- 0,3 daN.m
2.3. Ignition coils tightening torque = 0,8 +/- 0,2 daN.m

Nov 16, 2010 | 2005 Peugeot 405

1 Answer

Spark plugs


On the 3.5L the Electronic Coil Packs are located over the Cylinders/Spark Plugs.
These Coil Packs have seven (7) bolts on a Black Cover. Remove these seven (7) bolts, removing the Cover.
Access to the three (3) Front Spark Plugs is now gained.
The Rear three (3) Spark Plugs is the same, however it is in a tight spot near the Fire Wall.

Standard Rules: Some things are not Applicable for your specific engine.
Use a Spark Plug Socket to remove and install Spark Plugs.

Replace (remove) one Wire Connections at a time from one Spark Plug.
Replace One Spark Plug at a time. Use Anti-Seize Grease applied moderately to the threads on the new Spark Plug.
Using a Socket (with a extension) START all installations of all Sprak Plugs using your hands. This prevents cross-threading and stripping of the threads inside the Heads.
Standard Torque 15-20 ft-lbs.
Replace the One Wire Connection to that One Spark Plug.
Replace that One Wire Connection to the Ignition Coil Connection.
Go onto the next Spark Plug using the above Rules.
Repeat.

For the 3.5L
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
1......3.......5
2......4.......6
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Mar 01, 2010 | 2000 Oldsmobile Intrigue

1 Answer

How do change spark plugs on a 1998 xj8


Remove plastic cover over the engine ( three screws).
You then have access to the front three spark plugs (cylinders 1,3,5) remove the nut which holds down the independant coils and remove the spark plugs, fit new spark plugs and fit coils on the three front cylinders.
Now it gets a little tricky, you will only be able to access number 2 back cylinder so you have to remove the induction manifold (12 bolts I think) to access the back three cylinders (2,3,6,) properly.
Then proceed as with the front three spark plugs, refit manifold and plastic cover,

Sep 29, 2009 | 1998 Jaguar XJ8L

2 Answers

How do you change the spark plugs in my 95 buick century ?


Use a spark plug socket wrench, remove the plug wire, unscrew the old spark plug, screw in the new spark plug, and re-connect the plug wire. Do 1 at a time

Aug 03, 2009 | 1995 Buick Century

1 Answer

Spark plugs difficult to replace


The engine does need to be shifted to replace the rear plugs, but it is easy. Take out the dogbone engine mount in the front of the engine compartment and push the vehicle backwards while still in park , then throw the parking break on once the engine tips forward.

Jun 18, 2009 | 1998 Chevrolet Lumina

1 Answer

Spark plugs


If you want to see the three spark plugs on the back you have to lift your car and put on jack stand and follow the spark plugs wire under your engine. You have ignition coil set beside spark plugs for spare.

Oct 12, 2008 | 2002 Kia Sedona

Not finding what you are looking for?
2006 Toyota Sienna Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...