Question about 2000 Chrysler Cirrus

1 Answer

I took my car into shop they said i need a pcm so i bought one now my car still wont start.... the fuel pump turns on when i go to try and start it. it is getting spark.. so what else can it be?..

Posted by on

  • dawniiey Feb 04, 2010

    when i bought the pcm they had it programed ( all downloads etc ) for the car. i just had to give them my information on milage and vin# etc... all i had to do was put it in and plug it in. .
    also i had just put in a new fuel filter and bought new relays.
    this car is costing me more money than it is worth...
    i checked all the fuses and wiring is good.
    any other ideas??

  • jennifer svoboda Mar 16, 2013

    Im having exact same issue but mine is the Chipped key. I have to have my key reprogrammed by the sounds of it

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

That pcm needs reprograming, you just cant buy one and put it in, the new computer needs to be programed or the car wont run, it might start but it will die out,have the pcm programed and if that was your problem the car should run. hope this helps.

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2003 pontiac vibe wont start it was running great the chk engine lite came on steady still ran great then one day turned off wont start again


Turn on switch and listen for the "buzz" from the fuel pump, if it has a good pump it should turn on for 3 seconds when key is on without cranking the motor. If engine turns faster than normal, likely a timing belt. These are my first checks for no start conditions.

Mar 06, 2016 | Pontiac Cars & Trucks

1 Answer

96 olds cutlass supreme intermitent no start due to pcm not turning on fuel pump


then check this wire from the relay to the pcm to see if there is a break in the wire or bad connection. if not then the pcm needs replacing. also check grounds for this circuit.

Aug 06, 2014 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Car wont start


Fuel pump or fuel filter.

Apr 12, 2014 | 2007 Mazda 3

1 Answer

I have a 1998 cadillac catera that we have had constant trouble with. We replaced idle air control valve fuel filter fuel pump and fuel pump relay. It ran for about 3 days after replacing fuel pump then...


Does it have spark ? engine compression ? Stuck open egr valve ?

Any codes stored in the PCM ? Is thier a security light lit on the insturment cluster . When you turn the key on , not start ,listen at the fuel filler neck with the gas cap removed > The PCM will energize the fuel pump for two seconds to prim the system . Can you hear the pump run . Turn it on an off a couple of times to make sure ! The best way would be to hook up a fuel pressure gauge . It sounds to me like your too fix on the fuel pump . When cranking the engine ,if the PCM doesn't see a input from the crankshaft position sensor it won't energize the fuel pump relay . If you want to fix your vehicle i suggest you learn how , an don't guess an just replace parts .
GM Fuel Pump Relay Testing
test the fuel pump electrical circuit

Jun 12, 2017 | Cars & Trucks

1 Answer

2000 mercurt grand marquis


Not guessing as to what the problem is , testing for voltage drop problems with a volt meter . posted a video on youtube yesterday . If your still looking for guesses forget it , no one on here could say for sure without testing the circuit an hooking up a scan tool to see if PCM is energizing the relay . Do yourself a favor an take it to a qualified repair shop . Fuel Pump Electrical Circuits Description and Operation If you can't learn how to test from this guy , better take to a repair shop .

Mar 01, 2017 | Ford Cars & Trucks

3 Answers

Replaced fuel pump and fuel filter and relays and the 03 lincoln navigator is still not starting? i have reset the reset button but still not getting power to the fuel pump, please help


Your pump is controlled by the PCM. Recommend you interrogate the relay socket to see if the PCM is trying to turn it on. You could also jump the relay there to see if the truck will start. If you want to jump the relay socket, be careful not to put 12 volts into the PCM. You want to jump the hot terminal to the load terminal, which should have a much lower resistance than the PCM. Please see my tip at http://www.fixya.com/cars/r6022358-relay_check . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me.

0101149.gif

Sep 27, 2010 | 2003 Lincoln Navigator

1 Answer

My 2001 blazer 4wd does not want to start. could it be the fuel relay switch? It has a new starter,fuel pump,oc2, spark plugs and fuel injectors, ...problem is i turn the key and i hear the engine trying...


The first thing I do is spray ether in mass air flow manifold and see if it starts. If it starts with ether I know I have a fuel delivery problem. The PCM providing less than 12 volts to the fuel pump results in low discharge pressure. You could also have a bad pressure regulator or a clogged fuel filter.

Jun 03, 2017 | 2001 Chevrolet Blazer

1 Answer

92 geo tracker wont start replaced gas pump fuel injector relays i can soray starter fluid in the carb and it will start right up but wont run


CHECK FUEL PUMP FUSE.AND CHECK IGNITION TIMING ALSO SCAN IT TO MAKE PCM IS GOOD.FUEL PUMP WONT TURN ON IF PCM OR ECM FAULTY.

Mar 17, 2010 | 1992 Geo Tracker

3 Answers

Car Wont start


check your fuel pump. have some lay on the ground by the fuel tank. Turn the key on but dont try to start. There will be a 1-2 sec. hum from the fuel tank. If nothing is heard then the pump is bad. the only way to change the pump isto remove the gas tank.

Mar 10, 2010 | 2000 Ford Contour

1 Answer

Wont start, new fuel pump


replace fuse and relay.also check oil pressure switch.it controls fuel pump also. check fuel pump wires and fuel injector fuse .if all is good pcm could be faulty it controls fuel pump on .command circuit

May 31, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
2000 Chrysler Cirrus Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...