Question about 1991 Chevrolet Lumina

2 Answers

Motor mounts rusted out. Where can I get replacement parts?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 226 Answers

Go here >> .. mounts&Ntk=Keyword&N=599001 101991 50012 2012037 11052 599999 109999 59999 2999999
copy and paste this in your browser .

Posted on Feb 03, 2010

  • dwayne sagh
    dwayne sagh Feb 04, 2010

    oh i hope i'm not comitting plagerism showing you this link ..... like any links associated with autozone now that it's a pay version . it was free to look up part locations , show a few people and bang they got it closed . guess their site isnt out to help people it's out to make a $ the rich get richer. so i personally wont buy any parts at autozone .

  • dwayne sagh
    dwayne sagh Feb 04, 2010

    the link did work and within 6 hrs it's locked out again / try napaonline search / it's there.


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Chevrolet Master
  • 12,650 Answers

Scrap yard-auto parts store-online parts or dealer the parts are readily available the 91 came with 2 motor options a 2.5lt l4 ----or the v6 3.1lt the motor mounts [anchor mounts ] run about 30.00 at most places

Posted on Feb 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Motor mount passenger side rusted out

Sounds like you need to get that replaced. If the metal that the mount is attached to is also rusted you need to get to a fabricator or body shop to have that replaced too.

Apr 21, 2013 | 1997 Buick Riviera

1 Answer


yep,had one like that ,have to support the engine and trans
with a bar and chains or whatever ,from the top and the subframe
comes out from under.not too bad ,the steering rack bolts are the
hardest thing,couple of motor mount bolts and the corner body
to frame mounts

Feb 26, 2013 | 1997 Oldsmobile LSS

1 Answer

Size of freeze plug behind motor mount on a 92 4.3

parts store will give the right one to you but check all of them while down there replace if bad or severely rusted..there should be 4 at least..

Feb 09, 2013 | Cars & Trucks

1 Answer

1997 Buick Lesabre--While driving, the cradle mount washers failed (due to rust) on both sides of the engine mount near the wheel wells. The bushings/washers flew off, the engine dropped, but the bolts...

I would get new parts and fix it.

if you have a floor jack put a block of wood on the plate and raise the motor so you can take the mount out and put a new one back on.

the block of wood is so you don't damage the oil pan.

put the jack and wood block under the oil pan close to front of motor so you can lift motor.

should be able to get motor mount parts at local auto parts store.

don't forget to vote for me.


Jul 16, 2011 | Buick LeSabre Cars & Trucks

2 Answers

The front end shakes when i apply the brakes

rotors are warped-- either have cut or replace

Mar 17, 2011 | 1997 Ford Windstar

2 Answers

Rusted sub frame

replace the sub frame this job is very difficult if you dont have proper tools to do the job if you want details let me know

May 27, 2009 | 1999 Ford Windstar

1 Answer

Rusted subframe

You may need to get rid of it. If the frame is rusted, it's only going to get worse. If the motor mount is not sitting just right, it will only get worse too. I would either sell it as is or have a welder to look at it to see if it's repairable.

May 27, 2009 | 1999 Ford Windstar

4 Answers

Rusted area of motor mount

replace mount these are common failure item let me know if you need details as to how to replace it

May 27, 2009 | 1999 Ford Windstar

1 Answer

I need to change my rear break pads and also my emergency brake will not dissengage once put on. How do i fix both?

My hyundai had the emergency brake bracket (mounted to the back of the caliper) rust solid. I used rust eater to get it to slightly break loose. I eventually had to replace both calipers. It is a very consistant problem. My new ones need alot of attention now as well I covered them in caliper paint to help with the rusting. The pads are very simple replacement 2 bolts on the back of the caliper. Remove the pads then screw back in the piston with a import tool from any auto parts store put pads back in, put back on the caliper.

Dec 15, 2008 | Hyundai Motor 2002 Elantra

2 Answers

Freeze Plug Leak on my 1996 GMC Jimmy

i would hardly call this repair simple or inexpensive. the part itself yes the labor probably not. i have made this repair myself to my 97 jimmy if you have 4 wheel drive the transfer case up front makes this repair next to impossible from the underside of the car plus the fact that it is behind the motor mount means the the mount must be removed. this involves raising or removing the motor. simple? on a car of this age you will probably find (as i did) the motor mounts are damaged might as well replace them too the parts are fairly inexpensive. also look into replacing all the plugs so you dont have to do this again in a few years. oh yea use the proper antifreeze mix in your radiator water is what rusts out the plugs

Nov 17, 2008 | 1999 GMC Jimmy

Not finding what you are looking for?
1991 Chevrolet Lumina Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides