Question about 2001 Ford F150 Styleside SuperCrew

1 Answer

Need wiring schematic for signal lights and flashers. The flashers don't work but the signal lights do.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 58 Answers

The flashers are on their own fuse or fuseable link at the battery

Posted on Feb 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashers don't work in a 2000 Pontiac Grand Prix. Don't have a book or wiring diagram to backtrace source of the possible problem.


Howdy anonymous,

Beyond the always FIRST STEP of blaming the "FLASHER"....
(see rockauto example $ below)

There immediately follows moving on out to the light bulbs and checking they (EACH & EVERY) work...

Then & only then do you start "BACK-TRACING"

I always recommend getting REAL FACTORY support documents but luckily BBB Industries has FREE documents for popular USA models: and TECHNICAL SERVICE BULLETINS...
(foreign & domestic... (registration required... real documents))

Go to the wiring SCHEMATIC... You will find REFERENCES to both BATTERY & GROUND...

It would be really helpful to know... WORKING STATUS?

Tail lights
Brake lights
Left signal
Right signal...

If Tail lights and Brake lights work... you can
pretty much forget about BACK-TRACING altogether...

Start with your FLASHER power source and move
immediately into the "multi-contact flasher switch

Cost... Rockauto
http://www.rockauto.com/en/catalog/pontiac,2000,grand+prix,3.8l+v6,1359345,electrical,flasher,10139

Details
More Information for ACDELCO E1958E

FREE wiring & TSBs
BBB Industries Premium Alternators Starters Power Steering Products

Hope this helps

Toner Tracer... (BACK-TRACER: not a novice tool)
Extech TG20 Wire Tracer and Tone Generator Amazon com

Carnac the Magnificent

Jul 07, 2017 | Pontiac Cars & Trucks

1 Answer

My signals and flashers. changed every thing and nothing. running lights work. its a 78 camaro.


Check the plug at the fire wall. Corrosion . Most likely hard wire it. Eliminate the plug. Lucky for you, it has no computers on it. You will have to start with power and grounds to the turn signal an fuse panel. Work your way threw it. A wiring schematic wold help, but good luck on finding one for a 78.

May 19, 2016 | Chevrolet Camaro Cars & Trucks

1 Answer

Does any have a wiring schematic for a 98 ford explorer xlt?


Best thing is to do a Web search titled "1998 ford explorer wiring diagram". This will give you results which include fuse boxes and power boxes and color coded wiring routing. Check for other items that are on the same fuse as the turn signals to see if they work. The turn signal flasher unit could also be bad.

Sep 24, 2014 | 1998 Ford Explorer

1 Answer

TURN SIGNALS & FLASHERS DON'T WORK


First check for a blowin fuse for them. If the fuse is good ,You need to change the signal light flasher.

Oct 25, 2012 | 1995 Plymouth Neon

1 Answer

Brake lights and turn signal don't work???


turn on the emergency flashers(e-flashers)if they work check the bulbs at the same time.if this is good then check the fuses.you may have a problem with the turn signal flasher needing replacing.this is a different flasher than that of the e-flasher,looks the same but a different flasher.usually located on or around the fuse panel under the dash.the brake light problem could be a misadjusted switch or a bad switch.the switch is at the base of the brake pedal and has two wires to it.one wire will have power all the time and the other wire will only have power on it when the brake pedal is pushed.if not then the switch will need replacing.check for broken wires at the switch as these sometimes break causing a problem.

Feb 08, 2012 | 1996 Pontiac Sunfire

1 Answer

Signal light and emergency flashers don't work


Check the relays and then check the wires... If its a relay you will need to replace it and of its a wire problem either fix the wires or get a new wiring harness

Dec 23, 2011 | 1997 Mercury Grand Marquis

1 Answer

My turn signals stopped working and my hazard light don't work either. I had problems for a while now they just stopped working? help


its your flasher. for either switch you must disassemble the steering column. The signal flasher switch is the first switch you will encounter. The hazard switch is a little farther down the column.Iif your looking to replace the flasher unit . There are 2,one for the signals & one for the hazards. Look under the dash,near the fuse block,they are normally small round cylindrical units that plug in with either 2 or 3 spade terminals. The signal flasher is usually plugged into the fuse block, the hazard flasher is usually near by with just wires plugged into it.be aware that if your going into the steering column you will need special tools

May 21, 2011 | 2000 Chevrolet Malibu

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

1 Answer

1992 Buick Regal turn signals not working. Bulbs,Flasher,and fuse are ok. Four - way flasher working, seems only pass. brake lights work. Put meter across fuse term. and voltage went on and off when signal...


Did you check for 12V at the bulb base? If not there, you have an open circuit between the flasher and the bulb base. If it is there you have a bad bulb, bad socket, or open ground.

Dec 13, 2010 | 2002 Buick Regal

Not finding what you are looking for?
2001 Ford F150 Styleside SuperCrew Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...