Question about 1993 Ford Ranger SuperCab

1 Answer

Looking for heater core - 1993 Ford Ranger SuperCab

Posted by on

  • kitty brady Feb 03, 2010

    how to do heater core for93 ford ranger

  • Brian May 11, 2010

    are you looking for the part or how to replace it?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Disconnect heater hoses at firewall. Probably doesn't matter about hose placement, but I always mark them just in case. To remove the fiber cover under dash, take a flatblade screwdriver and pry out the center pin of the expansion clips that hold it in place. There are four 5/16 head screws that hold the bottom/drain tray cover. Core will pull through the firewall and then down. You may have to silicone/glue or replace the foam seal strips on the new core. Before you install the core, check the distance between the inlet and outlet tubes to ensure they match the openings in the firewall. This saves time. It helps if you have someone on the outside to guide you when stabbing the tubes through the firewall. Replace bottom cover. You may have to hold one of the tubes when reinstalling the first hose to the core. Replace any lost coolant and check for leaks prior to reinstalling the fiber cover. If the cover seal is in good condition, any leak should drain through the firewall, otherwise it may leak inside cab. These days with parts from mexico and others, it is not uncommon to get a new defective part.

Posted on Feb 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the heater core?


most cars and trucks now have the a/c and heater core behind the dash - the dash has to be taken out to get to the heater core look to see where your heater core hoses goes thru the firewall - if it is directly behind the motor your heater core is on the other side of the firewall

Apr 24, 2015 | 2005 Buick LaCrosse

1 Answer

How do I change my heater core in my 1996 ford ranger


The heater core is located in the heater box, under the passenger side of the dash. Most FORD heater boxes are snap-clipped together, and if you remove the rear panel from the heater box, you will see the heater core...it looks like a smaller radiator...twist the heater hose off of the heater core (x2) from the engine side and gently remove the heater core from under the dash. When replacing the new heater core, be very careful re-installing new hoses to the core...it is a fragile thin metal that can leak almost instantly if tweaked too roughly...replace all parts in reverse order of removal.

Feb 01, 2015 | Ford Ranger Cars & Trucks

3 Answers

I bought a 99 tahoe four door 5.7 350. No heat. Previous owner bypassed heater core. Need to see how heater hoses attach.


Have you replaced the heater core? If not, most likely the reason the previous owner bypassed the heater core was because it leaked. I will be happy to send you photos of how the hoses attach but I will need your email address.

Dec 21, 2014 | 1999 Chevrolet Tahoe

1 Answer

Need to know where my Heater Core hoses hook up to on the engine? I see the Hoses but is there a seperate part that the hose connects to?


The best way to locate a heater core hose is to determine where the heater core is located. Many vehicles have the heater core inside the dash. Other vehicles, usually larger vans and trucks, will have a heater core box inside the engine compartment. Once you have determined where the heater core is located in your vehicle, that will allow you to easily locate a heater core hose. If the heater core is inside the dash, you'll need to examine the firewall for the hoses. If it is in a heater box, you'll need to look around the engine compartment for the box.




Heater cores located inside dashes can be very difficult and time consuming to replace. Depending on the layout of your engine compartment, it can also be difficult to locate a heater core hose. If there is very little clearance between the engine and the firewall, you may have difficulty finding the hoses. You might need to use a flashlight to look from the underside in some cases. You will typically be able to identify the heater hoses where they enter the firewall by looking for two two small diameter hoses that protrude into the engine compartment. You can then trace those hoses to their other ends, where they will typically connect to a thermostat housing, the radiator, or a t-connector.


Hope this helps.


know more about your car

Sep 12, 2012 | 1996 Lincoln Town Car

1 Answer

Where are the heater core hoses located to disconnect for a flush?


Regarding this types of problem,i suggest you to go through this help links.Click the link below to go through the procedure and troubleshoot the problem :----HOW TO REPLACE AN UPPER RADIATOR HOSE

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-upper-radiator-hose.html

-------------
HOW TO REPLACE A LOWER RADIATOR HOSEhttp://schematicsdiagram.blogspot.com/2011/07/how-to-replace-lower-radiator-hose.html
----------How to Flush Heater Core?http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html
------------

For heater core replacing procedure. I suggest you to go through this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models?

Click the link below: ---

http://technoanswers.blogspot.com/2011/11/how-to-replace-heater-core-for-all-car.html

--------------
How to Flush Heater Core?

http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html

---------------
How to Remove Heater Core ?

http://howtobyme.blogspot.com/2011/12/how-to-remove-heater-core-on-2008-honda.html
Heater Core Replacement?

http://howtobyme.blogspot.com/2011/12/honda-heater-core-replacement.html

------------
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------

How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to replace heater core on Buick Regal?

http://howtobyme.blogspot.in/2012/02/how-to-replace-heater-core-on-buick.html
----------This will help.Thanks.

Jan 23, 2012 | 2004 Dodge Dakota

1 Answer

1994 F-250 Heater Core


Answer for a 1995 F250:

Remove the glove-box door. Behind that is the heater core cover on the interior, passenger side of the firewall. Remove that cover and there is the heater core. Open the hood and look where the heater hoses enter the front right passenger area of the exterior side of the firewall. Disconnect the two heater hose clamps and you can then remove the heater core.

Jan 13, 2012 | 1994 Ford F250 Supercab

1 Answer

Windows fogging heater core replacement / location


  1. Disconnect the negative battery cable and drain the cooling system.
  2. Disconnect the heater hoses from the heater core inlet and outlet connections in the engine compartment.
  3. Allowing residual coolant from the heater core to drain. Cap the openings.
  4. Working inside the vehicle, remove the lower instrument panel sound insulator and look for where the air blows to your feet.
  5. Remove the heater floor outlet duct screws or clips and remove the duct.
  6. Remove the heater core cover by removing the attaching screws and clips.
  7. Remove the heater core cover.
  8. Remove the heater core retainers and remove the heater core
  9. Reverse order to install leaving the covers off at first then connect all hoses, refill and check for leaks before putting covers back.

Dec 17, 2010 | 1999 Oldsmobile Cutlass

1 Answer

I need to know how to replace the heater core, is it something i can handle or do i need to take it somewere?


usually not that hard on an older GM. locate approx location of heater core by looking for two matching size water lines that enter the passenger compartment thru the firewall from the engine compartment. go inside under dash and look for the heater core box. remove screw to open and expose the heater core

Sep 08, 2010 | 1993 Buick LeSabre

1 Answer

Need to replace heater core on 96 tbird....I have Instrument panel out.....glove box out.....center console (climate control unit and stereo) out......have heater hoses disconnected and two mounting nuts...




Section 12-03A: Air Conditioning System—Manual A/C-Heater 1996 Thunderbird, Cougar Workshop Manual REMOVAL AND INSTALLATION Heater Core Removal
  1. Partially drain the cooling system.
  1. Remove the tube gasket from the heater core tubes.
  1. Remove four heater core access cover retaining screws, and remove the access cover from the A/C evaporator housing (19850).
  1. Remove A/C electronic door actuator.
  1. Slide heater core (18476) and seals from the A/C evaporator housing (19850).
Installation
  1. Install the heater core (18476) in the A/C evaporator housing (19850) with the tube gasket on the outside of the case.
  1. Install the A/C electronic door actuator as described.
  1. Position the heater core cover on the A/C evaporator housing (19850). Install the four retaining screws.
  1. Refill the cooling system.


    Heater Core





    Item Part Number Description 1 18596 Heater Core Tube Gasket 2 18476 Heater Core 3 18B300 Heater Core Cover 4 390747-S2 Screw (4 Req'd) 5 18N267 Heater Core Cover Seal
  2. 3e541cd.gif

      Feb 16, 2010 | 1996 Ford Thunderbird LX

      2 Answers

      How to install a heater core on a 2005 dodge grand caravan


      Very easy if you go through the lower part near the peddles

      Dec 24, 2009 | 2005 Dodge Caravan

      Not finding what you are looking for?
      1993 Ford Ranger SuperCab Logo

      70 people viewed this question

      Ask a Question

      Usually answered in minutes!

      Top Ford Experts

      yadayada
      yadayada

      Level 3 Expert

      75005 Answers

      Colin Stickland
      Colin Stickland

      Level 3 Expert

      22095 Answers

      fordexpert

      Level 3 Expert

      5470 Answers

      Are you a Ford Expert? Answer questions, earn points and help others

      Answer questions

      Manuals & User Guides

      Loading...