Question about 1990 Ford F250

1 Answer

How do you remove the calipers from a 1990 ford f-250. Cant see ANY bolts on it??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

There are 2 bolts on the back side

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque specs for brake calipers on a ford explorer sport front calipers


  1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

    www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
    Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
    5 posts
    Mar 12, 2009
    05 F250 brake torque specs please
    6 posts
    Aug 22, 2007
    Brake caliper torque specs
    5 posts
    Jul 14, 2007
    Front brake Caliper Bolt Torque
    6 posts
    Apr 25, 2005
    More results from www.thedieselstop.com

Jul 11, 2015 | 1998 Ford Explorer

1 Answer

1990 ford f-150,,300 six. the bottom bolt on the alternator snapped off during removal,now i cant get it off and cant get to the bracket bolts either,,,any ideas?


Spray the bolt with PB Blaster a few times and let it sit for awhile. Use a screw extractor on the broken shaft.

Nov 16, 2014 | 1990 Ford F150

1 Answer

Brake shoes on 1987 f250 460 1987 2 wheel drive how to replace


Lift the front of your Ford F-250 off of the ground using a jack and jack stands. Remove the wheels from the Ford with a lug nut wrench to prepare the truck for servicing. 2 Open the hood on the engine compartment and take the lid off of the master cylinder that bolts to the brake assister on the driver's side firewall.3 Remove the hex-head bolts on the back of the brake caliper with a socket. With the bolts removed, pull the caliper off of the Ford's brake rotor.4 Pull the old brake pads out of the caliper and discard them. Squeeze the brake piston back into the backside brake caliper with pliers, and then insert the new pads into the brake caliper.5 Pull the rotor cap cover off the middle of the rotor with a screwdriver and use a socket to remove the nut located behind the cover.6 Pull the rotor off of the wheel spindle.7 Remove the old wheel bearings from the brake rotor and insert them into the new rotor. If the old wheel bearings are worn, replace them with new bearings.8 Slide the new rotor onto the wheel spindle and secure it using a bolt and socket. After you tighten the bolt, press the cover back onto the rotor.9 Place the caliper on the rotor and secure it with a socket and hex-head bolts. 10 Duplicate the process on the passenger side of the F-250. 11 Close the master cylinder after putting the wheels back on the Ford and lowering it to the ground. Press on the brake pedal to seat the pads against the rotor
Replace the F-250's Rear Brakes 1 lift the rear of the Ford F-250 off the ground with a jack and jack stands. Remove the wheels from the Ford with a lug nut wrench.2 Place a strip of paint on the back of the brake drum and rear brake drum cover so you can position the brake drum orrectly when you put it back on. If you plan to install new brake drums on your Ford F-250, skip this step. 3 Place the brake drum puller on the brake drum and pull the drum from the wheel hub. The method for attaching the brake drum puller depends on the brake drum puller that you use. 4 Remove the springs that attach the brake shoes to the wheel hub by pulling them off with pliers.5 Lift the old brake shoes off of the wheel hub and place the new brake shoes on the wheel hub. Secure the new shoes with the springs.6 Pound the brake drum onto the axle hub with a rubber mallet.7 Duplicate the process on the passenger side of the Ford.8 Put the wheels back on the F-250, lower it to the ground and, then press on the brake pedal to seat the shoes against the brake drum.

Oct 14, 2011 | 1988 Ford F 250

1 Answer

How do you the rotor off a 1990 honda accord lx


REMOVAL & INSTALLATION Except 1990–95 Accord
  1. If equipped with an air bag, disconnect the negative battery cable and properly disable the Supplemental Restraint System (SRS), as detailed in Section 6 of this manual.
  2. Loosen the lug nuts, then Raise and safely support the vehicle on jackstands.
  3. Remove the wheels.
  4. Remove the two 6mm screws from the brake disc. Fig. 1: Remove the two 6mm screws securing the brake disc 86809029.jpg

  5. Disconnect the caliper from the caliper bracket. Support the caliper out of the way with a length of wire. Do not allow the caliper to hang from the brake hose.
  6. Remove the caliper bracket. Fig. 2: Remove the bolt and guide pin from the caliper bracket, then remove the bracket 86809030.jpg

  7. Remove the brake disc. If the brake disc is difficult to remove, install two 8mm bolts into the threaded holes and tighten them evenly and alternately to prevent cocking the rotor. Fig. 3: Remove the brake disc from the caliper assembly 86809031.jpg

  8. Installation is the reverse of the removal procedure.
  9. If equipped, enable the SRS system and connect the negative battery cable.
1990–95 Accord
  1. If equipped with an air bag, disconnect the negative battery cable and properly disable the Supplemental Restraint System (SRS), as detailed in Section 6 of this manual.
  2. Loosen the lug nuts, then Raise and safely support the vehicle on jackstands.
  3. Remove the wheels.
  4. Remove the steering knuckle from the vehicle. Please refer to Section 8 for procedures.
  5. Remove the 4 bolts retaining the hub unit to the steering knuckle and remove the hub unit. Fig. 4: Remove the 4 bolts retaining the hub unit to the steering knuckle and remove the hub unit/rotor assembly 86809032.gif

  6. Remove the 4 bolts, then separate the hub unit from the brake rotor. Fig. 5: Remove the 4 bolts, then separate the hub unit from the brake rotor 86809033.gif
    To install:
  7. Assemble the disc to the hub unit and tighten the bolts to 40 ft. lbs. (55 Nm).
  8. When installing the hub to the knuckle, use new self-locking bolts and tighten them to 33 ft. lbs. (45 Nm).
  9. Install the steering knuckle.
  10. Lower the vehicle and check for proper brake operation.
  11. If equipped, enable the SRS system and connect the negative battery cable.
prev.gif next.gif

Aug 21, 2010 | 1990 Honda Accord

1 Answer

How to replace rear breaks on 2005 f350 super duty dually


Rear To Remove:
  1. Remove the brake master cylinder filler cap and remove fluid until the reservoir is half full.
  2. Raise and safely support the vehicle.
  3. Remove the rear wheel and tire assembly. CAUTION
    Never allow the brake caliper to hang from the brake hose.
  4. Remove the two disc brake caliper pin bolts.
  5. Lift the disc brake caliper from the anchor plate and position the caliper out of the way. Do not disconnect the fluid line.
  6. Inspect the disc brake caliper for leaks and replace the caliper if necessary.
  7. Remove the pads and retraction clips.
To Install:
CAUTION
Do not allow grease, oil, brake fluid or other contaminants to contact the pad lining material.
  1. Install retraction clips.
  2. Install the brake pads.
  3. Slowly compress the caliper pistons with a large C-clamp. CAUTION
    Use care not to damage the bleeder screw or front disc brake rotor shield.
  4. Install the disc brake caliper.
  5. Install the disc brake caliper pin bolts. Tighten the pin bolts to 26 ft. lbs. (35 Nm) (F-250, F-350 SRW). Tighten the pin bolts to 56 ft. lbs. (76 Nm) (F-350 DRW). Tighten the pin bolts to 46 ft. lbs. (62 Nm) (F-450 F-550).
  6. Install the wheel and tire assembly.
  7. Lower the vehicle.
  8. Fill the brake master cylinder reservoir with DOT 3 motor vehicle brake fluid.
  9. Inspect for correct brake operation.

Jul 06, 2010 | 2005 Ford F 350 Super Duty

1 Answer

How do i remove the front caliper 1988 f250


You will have to remove the wheel, turn the wheel to the left to where you can see the back of the brake caliper. There is a rubber hose that is screwed into the top of the brake caliper. Put a small drain pan and place below the caliper to cetch the brake fluid. Remove the bolt that holds the hose to the caliper. There are two bolts that hold the caliper to its' bracket. They are located inside a rubber boot one on the top of the caliper and one on the bottom. Remove these two bolts with a ellen socket or torx socket. Once these bolts are removed you should be able to slide the caliper off and replace it in reverse order. You will have to bleed the air out of the system on that side by openig the bleeder and let the fluid drip out.hope this helps pleave leave comment

Jun 30, 2010 | 1988 Ford F 250

2 Answers

Cannot get calipers off FORD


BRAKE HOSE BOLT IS STILL CONNECTED YOU HAVE TO LOOSEN AND REMOVE BRAKE HOSE BOLT BEFORE CALIPERS COME OFF.THE COPPER WASHERS THAT CAME OUT WITH BRAKE HOSE BOLT HAS TO BE REPLACED THEY ARE SEALS THEY WILL LEAK IF REUSE THEM.

May 30, 2010 | 2004 Ford Expedition

2 Answers

How do i remove the rotor for a 1990 honda accord


remove caliper, caliper bracket it may or may not have a screw that holds it to the hub pretty easy actually

hope2help

Apr 05, 2009 | 1990 Honda Accord

1 Answer

Brake replacement


take the brake caliper off, this is the part that holds and moves the brake pads thare will be 2 bolts holding it on ,one on top one on bottom. after taking bolts loose you may half to pry the caliper up and off brake rotor. once this is done remove old pads and use a brake caliper piston retraction tool to push the piston back into the caliper. you can get this tool at your local parts store or use a C clamp with one of the old brake pads to push it back.install new brake pads and install caliper .after completion make sure you pump the brakes till you get a good pedal before moving vehicle

Dec 26, 2008 | 1990 Ford Bronco

1 Answer

Changing brakes and rotors


Remove te cross pins that hold the caliper and the brake pads in place, then remove the caliper bracket, there are 2 bolts at the backside, then the rotro just slides off, clean any rust on the rotor mount area while the rotor is off, then using a large clamp depress the piston in the brake caliper and reinstall in reverse order, one word of caution, use quality replacement parts, Wagner is very good, if you don't use good parts you will end up with poor brake performance.

Oct 15, 2008 | 1990 Ford Bronco

Not finding what you are looking for?
1990 Ford F250 Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5681 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...