Question about 2001 Hyundai Elantra

1 Answer

How hard is it to replace a head gasket on a hyundai lantra

How hard is it to replace a head gasket compared to say a ford

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 102 Answers

Most head gaskets are straight forward. If you can replace one on a front wheel drive Ford you can replace about any front wheel drive head gasket. The only difference would be where the bolts are to remove the intake and exhaust. After that everything else is about the same. The best advice i can give is take time to read a manual like Haynes. They have manuals for just about every vehicle on the market.

Posted on Feb 03, 2010

  • Daniel Hebert Feb 03, 2010

    Most head gaskets are straight forward. If you can replace one on a front wheel drive Ford you can replace about any front wheel drive head gasket. The only difference would be where the bolts are to remove the intake and exhaust. After that everything else is about the same. The best advice i can give is take time to read a manual like Haynes. They have manuals for just about every vehicle on the market.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i can change spark plug seals in Hyundai lantra sports wagon


You must remove the valve cover as they are serviced on then.

Mar 19, 2014 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Just replaced head gasket on my hyundai lantra went to start it have no spark


Did you hook up the camshaft and crankshaft sensors?

Apr 27, 2012 | Cars & Trucks

1 Answer

How to replace head gasket for Hyundai lantra 1998


Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop manuals, service bulletins, campaigns, illustrations and procedures, etc.

Sep 07, 2011 | Hyundai Elantra Cars & Trucks

2 Answers

What is the average cost to replace a radiator in a 1997 Hyundai lantra. Are these low maintainence second hand cars?


Depending on the mileage of the car! Lantra can be a 'high maitenence' car. has it overheated due to the radiator leaking? They blow the head gasket fairly easily! aslo front struts seize. If engine hasnt had regular servicing they sludge up and wear out engine components, engine becomes very tappety and may eventually fail. It all depends if it has been cared for. hopes this helps. Ben

Aug 08, 2009 | 2001 Hyundai Elantra

2 Answers

My 1996 Hyundai Lantra has a blown head gasket


I beleive these are front wheel drives, alot of work if not experienced i wouldnt try it, it is alot of work, lots of parts and pieces.
if you have a manual and your good at fixing things you'll probably do ok, but i bet youll regret doing it,
good luck

May 20, 2009 | Hyundai Motor 1996 Elantra

1 Answer

I am doing a head gasket setting alignment


you will find two bright links on the chain that correspond to the dots on the cam shaft and the key ways on both cams should line up with the top of the head facing back towards the firewall IE parallel with the top surface of the head ( where the tappet cover bolts on), with the crank on TDC (top dead center)

Apr 19, 2009 | Hyundai Excel Cars & Trucks

1 Answer

How hard is it to replace a head gasket on an '04 Hyundai Elantra


depands on how mechanical your are . and you will need to send the head to a machine shop for plaining.you need tools and a torque wrench and the specs for tighten the head back down .it can be done with patience and on rare cases you can lift the head to replace the gasket without taking everything apart

Feb 27, 2009 | 2004 Hyundai Elantra

1 Answer

Hyundai Lantra 1994


After some extensive research, it looks as though they have two totally different body styles as well as a few others. The differences are as follows:

Lantra: 1.5L
Elantra: 1.6L or 1.8L engine sizes

Lantra: 2,336 lbs
Elantra: 2,500lbs Weight

Lantra: 11.89 gal
Elantra: 13.7 gal fuel capacity

those are only three differences that i have put up among the many that i have found. Lantra's also seem to be one of those out of states type cars that you find in Australia mostly. The body is also totally different.

Feb 23, 2009 | Hyundai Motor 1994 Elantra

Not finding what you are looking for?
2001 Hyundai Elantra Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...