Question about 1989 Toyota Camry

1 Answer

Passenger side window will only roll down from driver and passenger side controls,but does not roll up from either side.With an electrical tester,the power is showing on the motor side of the two prong gang plug that goes to the window motor,I get power both up and down when testing both wires but no action from the window motor going up.I did test the motor with test leads and the motor will go up and down, but not up when using either switch. Thanks for any insight

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Reverse your test light connector, connect it to power so you can check for ground at window motor, flip switch up or down should have ground at both wire's while flipping switch to up or down, more then likely your not going to have ground at the up position, do same test at harness before passenger door switch if no ground master switch bad.

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger window wont roll down with either switch but motor is good and getting power


New switch for the passenger side. The drivers side switch may be wired through the passengers side switch witch will make it not work if the passengers side switch is bad. Just a thought. Hope this helps.

Nov 10, 2013 | 2005 Chevrolet TrailBlazer

1 Answer

Passenger windown wont roll up or down, motor good


If the passenger side switch is bad it wont complete the circuit to operate the window. Recommend trying a known good passenger switch.

Nov 10, 2013 | 2007 Chevrolet TrailBlazer SS

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...


Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

2 Answers

Mazda 6 passenger window won't go up!!!


It sounds like it could be the window solenoid, or the window motor. It's unlikely the switches on both doors are bad. Check the solenoids and motors...

Oct 16, 2012 | Mazda Cars & Trucks

1 Answer

Passenger side window won't roll up using the driver's side switc


Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.

Aug 18, 2009 | 2003 Hyundai Tiburon

2 Answers

07 scion tc passenger window wont roll down when lock by driver..


thats cause that what the lock is for so it wont go down

Jun 06, 2009 | 2007 Scion tC Coupe

1 Answer

All of a sudden the driver side window will not roll up.


is it electric windows? if it has electric windows does the passenger window roll up using the switch for it on the passenger door panel? if it works on the passenger door panel and not on the driver's door panel , then your switch on the drivers door panel is bad... replace it.

Oct 13, 2008 | 1999 Oldsmobile Cutlass

Not finding what you are looking for?
1989 Toyota Camry Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...