Question about Peugeot 405

2 Answers

1996 peugeot 405 1.9 td estate heater blower works sometimes. usualy now works when I have given the blower body a knock

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 290 Answers

You may have worn out blower motor brushes, easiest is to replace the blower with a used one. It could also be a bad connector, but brushes are the more likely cause.

Posted on Feb 03, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 447 Answers

Check the power connection, make sure it is seated fully. If it is, you may want to start thinking about replacing the blower

Posted on Feb 03, 2010

Testimonial: "have unpluged power lead and reconected, seems to be working so far. will keep checking and advise"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peugeot 407SW Estate: airflow impeded-feels as if


Not familiar with vehicle but "rule of thumb". It's usually located under the wiper panel (high up )in the engine compartment and close to the heater motor assy itself . The replacement filter will give you some notion of size and location . Good Luck

Apr 11, 2010 | 2005 Peugeot 405

1 Answer

My indicators have stopped working also the heater


If the the indicator light's illuminate ,when turned on ,the signal flasher is at fault .
Replace it.

Mar 07, 2010 | 1991 Peugeot 405

1 Answer

My peugeot 1.9 desiel estate starts but miss fires for first 10 mins until enginge warms up then it appears to be ok


ours did that, but I;m surprised its starts ok in this weather .we had 2 heater plugs down. changed them and had no problems after that. was getting harder to start before though

Jan 03, 2010 | 1991 Peugeot 405

1 Answer

My heater blower has stoped working on my peageot


There is a 4" long Green ceramic resistor by the blower motor, prone to fail, I think Valeo does them on the aftermarket.

Nov 19, 2009 | 2005 Peugeot 405

1 Answer

How can I adjust my 1996 Peugeot 405 clutch cable


My 405 had a self adjusting clutch but the BX box fits and they were adjustable, take out the airfilter and pipes, grab the end of cable and pull hard, if it releases then it is a working self adjuster, if not look for the adjuster nut, some are fitter on a bell-crank near the starter (13mm) others are 10mm nuts on the end of the inner cable.

Mar 10, 2009 | 1991 Peugeot 405

1 Answer

Peugeot 106 blown lights


u changed the bulbs? blower, when not working try and tap it, i think it will work as i think your car is high milleage and brushes are worn in the blower, it is under glove box.

Feb 28, 2009 | 2005 Peugeot 405

2 Answers

My car heating does not work & I need a fuse box diagram


i do not have a diagram for the fuse layout however
looking at your fuse box pull ONE fuse out at a time and check that they are not blown they should have a link in the plastic if there is no link then it is blown most cars have the radio and cigarette lighter linked together and this is normally about 10-15 amps.
there is also a fuse for you heater controls however this normally stops the fan "blower" from operating if your temperature control is electric then the motor that moves the arm to mix cool and hot air flow may be damaged
hope this has helped
ricky

Dec 11, 2008 | 1991 Peugeot 405

1 Answer

Heater blowing only moderate ,warm air, needs to be hotter ?


take off the inlet and outlet feed pipes and flush through with a hose alternating the direction.top up rad with pure antifreeze

Nov 11, 2008 | 1990 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...