Question about 2001 Mitsubishi Montero Sport 4WD

1 Answer

Neutral lamp flashing and check engine light on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 211 Answers

Your post is 7 months old, i image by now you had to take it to get fixed,
in the future any time your check engine light comes on ,even if it comes on and goes back out the next time you drive, take it to an auot parts store. like advanced auto or auto zone etc etc .they will check your code for ( free ) the code is stored in your memory , ask for a print out or write down the code and meaning of the code .that is what you need to post on fixya to get a faster response. example p0103 mass air flow low voltage. happiness is no check engine light. since i am new to fixya i have taken on all the un answered check engine light ,

Posted on Aug 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car won't start lights and radio work just had catalytic convertor replaced 2 days ago


First explain why it won't go into neutral. This may be the problem for no start.

Jul 29, 2016 | 2007 Suzuki SX4 AWD

1 Answer

1998 blazer 4x4 cannot get it into 4 wheel high when i pus the button th4x4 and low range lights both blink and it goes back to 2 wheel high


Transfer Case Shift Control Switch Indicator Flashes and Returns to Original Mode.
Circuit Description
This symptom usually occurs when a shift into or out of 4LOW will not occur. When the transfer case control module (TCCM) receives a request to shift into or out of 4LOW, the TCCM must see the following parameters before the shift routine can start:
?€¢
The vehicle speed must be below 3 MPH.


?€¢
The transmission must be in neutral.

If the TCCM does not see these conditions the shift control switch indicator lamp will flash for approximately 5 seconds and then return to the original gear.
Test Description
The numbers below refer to the step numbers on the diagnostic table.

  1. This step tests the operation of the transfer case shift control switch to help determine if the system is operating properly.

  2. This step determines if the vehicle speed sensor reading is correct.

  3. This step determines if the park switch reading is correct.

Switch Indicator Lamp Flashes and Returns to Original Mode
Step

Action

Value(s)

Yes

No

Schematic Reference: Transfer Case Control Schematics

1

Important: The transfer case shift control module is not a class 2 device, and therefore a scan tool can not be utilized on this transfer case.

Did you perform A Diagnostic System Check?
--
Go to Step 2
Go to Diagnostic System Check

2

  1. Start the engine.
  2. Place the transmission into NEUTRAL.
  3. Set the park brake.
  4. Depress each of the shift control switch buttons.

Does the transfer case range change with the press of all of the shift control switch buttons?
--
Go to
Testing for Intermittent Conditions and Poor Connections
Go to Step 3

3

Use the scan tool in order to read the vehicle speed sensor on the transmission control Data Lists.

Is the vehicle speed within the specified range?
0 km/h (0 mph)
Go to Step 4
Go to
Powertrain On Board Diagnostic (OBD) System Check for the 4.3L engine

4

  1. Put the transmission in neutral.
  2. Observe the current state of the transmission on the scan tool in the transmission control Data 2 List.

Does the scan tool indicate the transmission is in Neutral?
--
Go to Step 5
Go to
Powertrain On Board Diagnostic (OBD) System Check for the 4.3L engine

5

Replace the transfer case shift control module. Refer to Transfer Case Shift Control Module Replacement .

Did you complete the replacement?
--
Go to Step 6
--

6

Operate the vehicle within the conditions for causing the symptom as specified in the supporting text.

Does the symptom re-occur?
--
Go to Step 2
System OK

Feb 12, 2015 | 1998 Chevrolet Blazer

1 Answer

How do I fix my 99 blazer the dome lights won't turn on and the 4 who drive won't light up or work


In the instrument panel fuse box fuse # 8 CTSY LP 10A ,that's for the dome lights, fuse panel is left side of IP. What are you talking about 4 who drive won't light up or work ? 4 wheel drive ? Do you have two speed automatic or two speed selectable ?
Switch Indicator Lamps Do Not Light - One or More ? Check fuse #15 IP fuse box 10A 4WD . This is for two speed auto !

Circuit Description

The indicator lamps circuits consist of 5 individual lamps contained inside the mode/range switch assembly, they are AUTO, 4WD, 2HI, 4HI, 4LO and NEUTRAL. The AUTO, 4WD, 2HI, 4HI, and 4LO lamps are contained inside their respective range button. When the ignition is ON, the transfer case shift control module illuminates the indicator lamp that corresponds to the current ATC gear position by providing a ground through a current limiting driver.
The transfer case shift control module flashes each indicator lamp after a shift has been requested and will continue to flash until the transfer case shift control module can complete the shift. After a shift to AUTO, 4WD, 2HI, 4HI, or 4LO is made, the transfer case shift control module will flash that indicator lamp until the transfer case shift control module receives a high voltage signal on CKT 1695 from the front axle switch.
A solid state circuit located inside the switch supplies ignition voltage to the lamps. The solid state circuit also receives voltage whenever the headlamp switch is in park or headlamp position. When the solid state circuit receives voltage from the headlamp switch it will reduce the voltage that it supplies to the indicator lamps, dimming the lamps when the headlamps are ON.

Feb 07, 2015 | Cars & Trucks

1 Answer

2005 Mitsubishi outlander flashing neutral light


with these lights on there could be a lot of different problems. the best thing to do is to take it to an autoparts store and they will scan it for free and tell u the problem.

Apr 13, 2014 | Cars & Trucks

1 Answer

I have a 2003 Grand Prix SE. Both my reverse lights and my brake lights do not work but the 3rd brake light in the window works. My bulbs are fine and my fuses are all fine. I checked the fuse box in...


Back up lamps, Use a test light and check voltage and ground. Check voltage at fuse also, using the test light. As you can see, the back up lamps are wired through the neutral switch. At the back up lamp socket, the light green wire is voltage and black wire is ground, check them both.
back up lamps-5xbqh4escbkg5at0btapg3ca-1-0.jpg

Nov 16, 2017 | Pontiac Grand Prix Cars & Trucks

1 Answer

Runs rough with check engine light flashing


Flashing MIL Lamp on a Ford, is a Class A exhaust
converter damaging Cylinder Misfire

Get your codes ,google them & diagnose the problem
& don't use it until resolved

Mar 28, 2013 | 2000 Mercury Mountaineer

1 Answer

What is service engine light code 12 mean



READING CODES USING MIL (CHECK ENGINE) LAMP

Be advised that the MIL or CHECK ENGINE light can only perform a limited number of functions and it is a good idea to have the system checked with a scan tool to double check the circuit function.

  1. Within a period of 5 seconds, cycle the ignition key ON - OFF - ON - OFF - ON .
  2. Count the number of times the MIL (check engine lamp) on the instrument panel flashes on and off.

The number of flashes represents the trouble code. There is a short pause between the flashes representing the 1st and 2nd digits of the code. Longer pauses are used to separate individual 2-digit trouble codes.
An example of a flashed DTC is as follows:


Lamp flashes 4 times, pauses, then flashes 6 more times. This denotes a DTC number 46. Lamp flashes 5 times, pauses, then flashes 5 more times. This indicates a DTC number 55. DTC 55 will always be the last code to be displayed.


0900c1528007935b.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Diagnostic trouble code chart (1 of 2)-1995-97 engines


0900c1528007935c.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Diagnostic trouble code chart (2 of 2)-1995-97 2.0L engines

Jul 26, 2012 | 1995 Dodge Neon

1 Answer

Service engine light is flashing and runs sluggish when in gear.runs fine when in neutral,any ideas?


Flashing check engine light means Eminant Engine Damage soon!
Sounds like a bad or clogged catalytic converter. Maybe take to Autozone or O'reillys' have them hook up "Scan Tool" for free & get codes..

Jul 12, 2012 | 2002 Nissan Frontier Crew Cab

4 Answers

I have a 96 cavalier.it wouldnt start by using the ignition key,so i shorted the solenoid and it started...got home and it still wouldnt start,so i did the same thing and it started,then all the warning...


it can be the ignition switch or the neutral safety switch. put the transmission in neutral to see if it will start, if it does then the neutral safety switch is bad. if not then check your ignition switch

Mar 13, 2010 | 1996 Chevrolet Cavalier

1 Answer

It will not start or even turn over when I try to start it


Vehicle not all the way in Park or Neutral? Bad battery? Bad battery cable? Bad Transmission range selelector switch? Bad Starter? Bad starter relay? Onboard security system disabling start circuit? Locked-up engine?

What is working and what is not? Headlamps? Interior dome lamps? Radio? Warning lamps on dash? Is the "Security" light flashing?

Is it making any noises when you turn the key?

Oct 30, 2009 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...