Question about 2000 Dodge Stratus
Here is a link for very detailed intructions on a 1996 stratus. It is the same core so yours should be the same procedure.
Hope that helps.
Posted on Feb 03, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
a lot of pain and heart ache. even on a rack they are a pain . check with your dealer there wae a recall on them for failing its worth the phone call to see kdc744
Posted on Feb 08, 2009
Remove both heater hoses from motor. Put your garden hose in one end and tape on securely with the other end pointing in a direction the water flow from it will not hit distributor or other vital electronics. Turn on hose - If water come out of heater core at same rate as you are pumping it in then your heater core is flowing - if not then your core is blocked or plugged. Be mindful - if the core is plugged the water will break the seal of the garden hose and heater hose, spraying everywhere, so turn the water on low to check and be ready to shut off quickly!!
Posted on Nov 27, 2010
SOURCE: heater core
The automotive repair manuels that you can buy at the major part stores such as Autozone, Advance or ORiley's do a good job of describing how the heater core is removed. Most heater cores come out from under the dash, while a rare few are removed from the firewall.
One wonders why you are changing the heater core. Are you getting steam on the inside of your windshield? Usually the best indication your heater core is leaking, or are you getting no heat? In which case it make be duct doors.
Posted on Nov 19, 2008
SOURCE: how to change a heater core
Once you pull the dash out and get the old core out. If you have a copper one take a tubing cutter and cut the tubes in half that go through the firewall.Grt yourself two half inch copper couplers.Run the two pieces through the fire wall then drop the core in place connect then solder. If aluminum similar cut then flare both ends then connect with rubber heating hose and clamps and away you go. Then you don't have to disconnect air conditioning.
Posted on Jan 25, 2009
Tips for a great answer:
Jul 29, 2015 | 2005 Dodge Stratus
Dec 03, 2013 | 2000 Dodge Stratus
Regarding this types of problem,i suggest you to go through this help links.Click the link below to go through the procedure and troubleshoot the problem :----HOW TO REPLACE AN UPPER RADIATOR HOSE
HOW TO REPLACE A LOWER RADIATOR HOSEhttp://schematicsdiagram.blogspot.com/2011/07/how-to-replace-lower-radiator-hose.html
----------How to Flush Heater Core?http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html
For heater core replacing procedure. I suggest you to go through this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models?
Click the link below: ---
How to Flush Heater Core?
How to Remove Heater Core ?
Heater Core Replacement?
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------
How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to replace heater core on Buick Regal?
----------This will help.Thanks.
Feb 16, 2012 | 1999 Dodge Stratus
Jan 09, 2011 | 2000 Dodge Stratus
Nov 27, 2010 | 2004 Dodge Stratus
Dec 06, 2009 | 2000 Dodge Stratus
Nov 22, 2009 | 1999 Dodge Stratus
Oct 18, 2009 | 1998 Dodge Stratus
Apr 16, 2009 | 2000 Dodge Stratus
Oct 13, 2008 | 1998 Dodge Stratus
1,022 people viewed this question
Usually answered in minutes!