Question about 1989 Isuzu Trooper

1 Answer

Need picture of timing marks to replace timing belt for izuzu big horn 2.8

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,050 Answers

need picture of timing marks to replace timing bel - a58d27d.jpg

It has a chain.

Posted on Feb 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is the engine not starting


If the belt broke, and you put a new belt on with everything in the same position, most likely the belt is not correctly installed. The
cam position and crankshaft must be in a exact position, with
marks on both to match a similar mark on the non moving part of the engine. If your engine is an "interference" engine you are
in big trouble with a broken timing belt because valves are bent
not closing and other problems. I hope this is not the case.
Goggle your make year model and timing marks You should be able to find pictures that will show the marks that must line up.
I had a belt off by just one cog and had your problem. Double
check to be sure you have the right timing belt from your supplier. There is a chance someone mixed things up. Do you have spark?

Feb 13, 2015 | Cars & Trucks

1 Answer

Holden timing marks for 2.8 diesel turbo 1999 rodeo pictures of timing gears and marks please


hi i got a izuzu holden 2.8 turbo diesel gear timming i need a pic of timming marks pls i put in new diesel pump

Oct 05, 2011 | Cars & Trucks

2 Answers

I just put a timing belt on my Izuzu Rodeo and it wont start( seems to try but has no power. If i was one notch off on my belt do I have to realign the belt or is there an adjustment like we use to do with...


There is no adjustment. The belt is probably off by more than one tooth as it would likely start if it was just a tooth. Either way, the belt must be on perfectly for the engine to run well. Sometimes it is difficult to align the marks at the outside of the sprocket with the mark at the back cover. If you lay a tooth pick across the cam sprocket so that it follows the tooth under the belt to the back cover, it makes it easier.

Aug 17, 2011 | 1997 Isuzu Rodeo

1 Answer

How to replace water pump on 2000 volkswagon beetle with1.8 liter turbo engine?


The following steps need to be taken to remove the pump.

1. Remove the ribbed belt. Compress the tensioner and remove the belt. Remove the ribbed belt tensioner.

2. Remove the upper timing belt cover.

3. Align your timing belt marks. The following pictures are for the cam timing mark, the flywheel timing mark for an automatic, flywheel timing for a manual and the marks on the harmonic balancer.

4. loosen the timing belt. There is a 13mm head nut that keeps the tensioner in place. Loosen this nut and turn the tensioner clockwise to get come slack in the belt. You are going to need a tool to get tension back on the belt. I use the tool pictured (picture of how to tension the belt) but know of people using snap ring pliers to rotate the tensioner.

5. Slip the timing belt off of the cam drive sprocket and off of the water pump.

6. Remove the water pump retaining bolts pictured and remove the water pump. The pump can often be stuck in place. A screwdriver carefully used can help in getting the pump

7. Moisten the o-ring with coolant before installing the new pump. Install the new pump.

8. Install the belt and tension as shown in the picture attached above. Turn the engine over by hand through a full revolution of the cam gear. Re-check the timing marks. The marks will often be off, don't be discouraged by this, it happens to everyone. If the marks are off loosen the belt and slip it the amount of teeth needed to align the marks.

9. Install the items taken off during the removal of the pump, fill the system with coolant and start the engine. The system will pretty much bleed itself out as it reaches operating temperature.




Jun 30, 2010 | 2000 Volkswagen Beetle

2 Answers

Looking for timing mark's for a 1997 camry with a 2.2 4cyl motor?


Hi,


You find the timing marks on the picture below.

moz-screenshot-2.pngaab8238.jpg



Removal
Remove auxiliary 1. drive belts.
2. Support engine.
Remove:
Engine mounting and bracket.
Timing belt upper cover [1].
3.
4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].
Remove:
Crankshaft pulley bolt [4].
Crankshaft pulley [5]. Use tool No.09213-60017.
5.
6. Ensure timing marks aligned [2] & [3].
7. Slacken tensioner bolt [6]. Move tensioner away from belt and lightly tighten bolt.
Remove:
Timing belt lower cover [7].
Crankshaft sprocket guide washer [9].
Timing belt.
Tensioner pulley.

Installation
Installation
1. Check tensioner pulley for smooth operation.
2. Check free length of tensioner spring is 46,0 mm [8]. Replace spring if necessary.
3. Fit tensioner and spring. Ensure spring is connected correctly.
4. tighten bolt [6].
5. Ensure timing marks aligned [2] & [3].
6. Fit timing belt. Ensure belt is taut between sprockets.
Install:
Crankshaft sprocket guide washer [9].
Timing belt lower cover [7].
Crankshaft pulley [5].
7.
8. Slacken tensioner bolt 1/2 turn [6].
9. Turn crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].
Turn crankshaft slowly 1 7/8 turns clockwise until crankshaft pulley timing mark [3] aligned with 45° BTDC mark [10] on
timing belt lower cover [7].
10.
11. Tighten tensioner bolt [6]. Tightening torque: 42 Nm.
12. Install components in reverse order of removal.
13. Tighten crankshaft pulley bolt [4]. Tightening torque: 108 Nm.
Manufacturer: Toyota

Jun 25, 2010 | 1997 Toyota Camry

1 Answer

Cam belt timing 1994 Isuzu trooper big horn


no timing, cam belt must be installed corectly inorder to have right timing.

Oct 03, 2009 | 1994 Isuzu Trooper

2 Answers

How to set timing belt


always be sure to set to top dead cyl1 before removing belt. there will be mark on the cam gear and another on flywheel seen through passage in bellhousing there will also be a timing mark on the balance shaft. I found it best to ignore timing mark on balance shaft gear and just remove distributor cap. you will see rotor pointing to #1 plug wire and rotor will also line up to a small notch in distributor body. this way is more accurate. also after setting timing belt turn motor over 2 full turns then recheck timing marks again. while your in there check the bearings in all idler pulleys and tensioner pulleys, hate to have to go back in there again just for a noisey bearing later. good luck.

May 13, 2009 | 1997 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...