Question about 2003 Ford F250 Super Duty Crew Cab

2 Answers

Where is the turn signal\hazard flasher located?

Where is the turn signal-hazard flasher located?Ford F-250 SD 2003 6.0 diesel

Posted by on

  • 1 more comment 
  • brumic_r Feb 04, 2010

    Thanks for your help.. I actually meant the physical flasher/relay unit. I have since located it. It is mounted on a brace behind the radio under a plastic cover. The cover pops off and the flasher/relay pulls out. About 1" cube with 5 terminals on. Changed and working great. Thanks again.

  • Anonymous Mar 23, 2014

    Turn signals on my ford 1988 truck don't work but hazards do

  • Anonymous Mar 24, 2014

    Hazard flasher won't shut off in
    2003 ford windstar

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

It's in the auxiliary relay box behind the glove box.

13350 is base part number on flasher

Posted on Feb 03, 2010

Testimonial: "Actually found it located behind the radio mounted on a brace. Removed cover and relay pulls out. About 1" cube with 5 terminals on it."

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

From 2003 F250/350/450/550 (f23) Owners Guide:

The hazard flasher is located on the steering column, just behind the
steering wheel. The hazard flashers will operate when the ignition is in
any position.

Push in the flasher control and all front and rear direction signals will
flash. Press the flasher control again to turn them off. Use it when your
vehicle is disabled and is creating a safety hazard for other motorists.
Note: With extended use, the flasher may run down your battery.

Also can check your owners manual HERE.

Hope helps.

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of flasher on a 2006 ford e350 ecoline wheelchair van


Under the steering column on driver side by the fuse box you will see a round metal or plastic button like device when you turn the blinker on should make the blinking sound once? Keep turning it on and off until you locate the flasher? Note: there are two flashers one is hazard and the other is turn signal! Make sure your hazard flasher blinks after you unplug the turn flasher so you know you have the right one located?

Mar 29, 2014 | 2003 Ford Crown Victoria

1 Answer

2003 Ford F350 Super Duty 4WD Diesel 6.0L Duallie Turn Signals inop


you have a short in the wire somewhere. you can trace the wires and look for any exposed or burnt looking wires to start out with.

Dec 31, 2013 | Cars & Trucks

1 Answer

Why dont headlights come on an ford f 250


Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher

you need to replace the blinker flasher unit

it is different from the hazard unit

they cost about 4 bucks

the flasher unit is the big round thing in the fuse panel in the dashboard


Oct 05, 2012 | 1988 Ford F 250

1 Answer

When the blinker is flipped up or down on the column the tail lights dont respond. But the brake lights and the hazards still work fine. Whats the problem?


The turn signal flasher relay may have a problem.Turn on the hazards and follow the clicking sound to the source and usually the hazard flasher and turn signal flasher are very close to each other.Remove the one that is clicking and put it in place of the turn signal flasher.If the Turn signals then work you will need to purchase a new turn signal flasher relay.They are usually just a few dollars.

Jul 29, 2010 | 1986 Ford F 250

1 Answer

Turn signal don't work. Brake lights work. Hazard lights work. Any ideas as to whether there is a flasher or fuse problem. I can't seem to locate a turn signal flasher.


yes there should be a fuse for turn signals and your owners manual will tell you where to look on the 7.3's it is under hood by master cylinder

Apr 30, 2010 | 2006 Ford F-250 Super Duty

1 Answer

Need to locate flasher (turn signal) on 1999 F350 SD 7.3L


For 1999 Ford Truck F350 Super Duty P/U 4WD 7.3L Turbo Diesel 8cyl the Flasher is located: Behind center of instrument panel.

Hope this help to fint it (remember comment and rated this).

Apr 19, 2010 | 1999 Ford F350 Regular Cab

1 Answer

Where is the turn signal relay, hazard relay, and flasher for a 2003 Ford F150? My turn signals do not work (inside or outside), but 3 out of 4 outside lights work when the hazards are on, but with only 1...


It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).

Try tilting the steering wheel all the way up, and test again.

The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,

Apr 01, 2010 | 2003 Ford F150 Regular Cab

1 Answer

2004 Ford f-250 diesel. The hazard lights and turn indicator lights do not work. The fuse is good. The problem is not in the multifunction switch. I can not find a flasher relay.


Ford is notorius about the hazard switch going bad in the column. I have three trucks from 95 thru 02 that have the same problem. we just don't use the hazards and the turn signals work.

Oct 26, 2009 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

Location of hazard flasher on 1994 ford f-350


on the 1994 there are 2 flashers. The emergency flasher is on the back side of the interior fuse panel right behind the turn signal flasher.

Apr 22, 2009 | Ford F-350 Cars & Trucks

2 Answers

Location of flasher for turn signal


  1. Access the COMBINATION Turn Signal and Hazard INDICATOR FLASHER on the Left-Hand (drivers) side of the instrument panel in the fuse junction panel.
  1. Remove turn signal flasher/hazard indicator flasher by pulling indicator flasher straight out.
  1. To install, align the terminals of the flasher and press into place.
How about a picture--

388df46.gif

Oct 03, 2008 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
2003 Ford F250 Super Duty Crew Cab Logo

3,627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...