Question about 2006 Cadillac Escalade
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Heated seat
Could be that the wiring for the heater is broken, or that the heating element itself has been damaged. Has anyone knelt on the seat when reaching in to get something out of the car? Or has anyone stood on it (a child maybe)? Pressure like that can break the heaters and keep them from firing up.
Posted on Sep 17, 2008
as long as nothing is stuck in track and you hear no noise when using switches, look for broken wire at connector or in harness. ck fuse first of course, if blown, something may be stuck in track causing it to stop and blowing fuse
Posted on Nov 16, 2008
Dumb question, are you sure you are using the driver one remote? Being a car dealer, some installers will power the unit to certain fuses and some times this can cause issues. He may have told you 30 but most of these guys really don;t know and they are taught once and never really know if it is a problem from car to car. It sounds like a power failure of some sort causing it to reprogram itself to original specs. I went to a NTB for a battery change and I too had some issues and to my luck the guy was a GM tech at one point. So he was able to give me a few tips. Now you may not have this luck but Maybe call a few local shops like this and ask them if the have any GM techs you can run and issue by. You would be suprised where some of these guys have come from. Especially with the layoffs and need to work, anywhere....
Hoepfully this helps.
Posted on Mar 24, 2009
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Posted on Dec 07, 2009
Testimonial: "Thanks for your assistance. Great information"
Tips for a great answer:
Jan 16, 2017 | 2003 Cadillac Escalade
Nov 02, 2013 | 2006 Cadillac Escalade
May 23, 2011 | Cadillac Escalade ESV Cars & Trucks
Dec 09, 2010 | 2006 Cadillac Escalade
Jun 17, 2010 | 2000 Cadillac Escalade
Nov 23, 2009 | 2003 Cadillac Escalade
Jun 18, 2009 | 2006 Chevrolet Trailblazer
247 people viewed this question
Usually answered in minutes!