Question about 2008 Ford Escape
ABS and traction control just went out on 2008 ford escape! both lights stay on. Checked ABS fues and it was OK.
Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.
Posted on Feb 03, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 28, 2016 | Ford Cars & Trucks
Nov 30, 2016 | 2006 Ford Escape
Aug 05, 2016 | 2008 Ford Escape
engine and the automatic transmission in this vehicle are computer
controlled and in most cases when a fault occurs a fault code is
stored in the memory of the computer control module. There are
exception to this, such as the Mass Airflow Meter and fuel pressure
problems. What must be done is to have all the basic testing done
such as a scan of the system for fault codes as well as a check with
a live data scanner tool for engine functions that are not within
range of normal, a trained technician is required to know what is
correct and what isn't, then based on careful diagnostics done from
a factory repair manual the correct part is replaced or the wiring
repaired or the computer replaced (known as the PCM), which is very
rarely the problem. Other basic checks must be done as well such as
mechanical problems with the engine as well as engine state of tune
and mileage on the engine. The transmission can have mechanical
issues as well such as no gear engagement at all or a failed pump or
other pressure related problems.
Sep 25, 2012 | 2008 Ford Escape
Jun 21, 2011 | Ford Escape Cars & Trucks
Dec 19, 2010 | 2008 Ford Escape
Jun 06, 2010 | 2008 Ford Escape
Feb 16, 2010 | 2008 Ford Escape
Sep 01, 2009 | 2005 Ford Escape
Nov 27, 2017 | 2008 Ford Escape
2,125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: