Question about 2008 Dodge Avenger

2 Answers

How do I remove and replace the stock radio in a 2008 Dodge Avenger?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

I could type this all out but i found this link for you. Not from this site but is very detailed.

Posted on Feb 03, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 593 Answers

First. You need to put the radio in transport mode.
Key on, press scan and set buttons together and
hold untill transport comes up on the screen. If you
don't you will need the code to reactivate the radio.
Next. Disconect the negative battery cable. Gently
pry back the inst.panel center bezel and remove.
Disconnect the hvac control connecter and harness
connecter. Remove radio mounting screws.
Pull the antena lock connecter and remove antena
cable. To install reverse the procedure.
Hope this helps. Good luck.

Posted on Feb 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How to replace the radio fuse on a 2008 Dodge Avenger?

At the totally integrated power module (TIPM), locate 15A FUSE 20. Remove the old one. Install the new one.

May 19, 2017 | Dodge Avenger Cars & Trucks

1 Answer

How can i get code for radio on 2011 dodge avenger

If this is the stock radio for this car call the dodge dealer, they will Ask for your vin number, and they can provide you with an unlock code, this is usually the only way, as each radio has its own custom unlock code associated with the particular cars vin, and also the serial number on the back of the radio. If this radio came from a different avenger , you will most likey have to take it to a dodge dealer, so they can unlock it for you using their computer.

Apr 03, 2016 | Dodge Cars & Trucks

1 Answer

How do i reset my radio for my car early 2008 dodge avenger ext with a 2.7

I just remove my batterie without removing the wheel. Turn right to have acces and when all the bolt are off turn left and you will have enough room.

Oct 03, 2014 | 2008 Dodge Avenger

1 Answer

How do i replace the reclining lever for a 2008 dodge avenger

The mechanism is probably held in with a bolt and spring, so you'll
have to remove the plastic side cover around the bottom of the seat,
to gain access. Once the cover is off, you will just need to remove and
replace the bad parts.

Mar 29, 2010 | 2008 Dodge Avenger

1 Answer

Where is the radio fuse in a 2008 dodge avenger?

Open the hood and you will see the fuse box! Under the fuse box lid is a diagram, look for fuse slot # 20

Jan 17, 2010 | 2008 Dodge Avenger

1 Answer

I want to hook up an amp and speakers to my 2008

The remote wire is an accessory power source, like the ACC line from your radio. (usually the red one). Can also be hooked into anything that has 12v when the ignition is on, like a powered antenna.

Jan 05, 2010 | 2008 Dodge Avenger

1 Answer

Dodge avenger 2008 stock in park in the parking lote

Your car should still be under warranty and should not cost you anything to have this repaired. Just bring it back to the Dealer and they can run the vin number on your car and from there, they can tell you if there is going to be a charge or it's still under warranty. Good luck and hope this helps. 

Sep 30, 2009 | 2008 Dodge Avenger

1 Answer

Remove dodge avenger radio

you have to remove the crome shifter bezle. (it all just pops out so do be afraid of beaking it.) remove the cubbie in front of the shifter. pull back and up on the bezle around ur shifter. then grab the bottom of ur radio bezle and pull out. it should pop out, just be carefull and disconnect the wiring.

Aug 12, 2009 | 2008 Dodge Avenger

1 Answer

Replace Bulbs in Headlight. 2008 Dodge Avenger

there is 2 bolts on top 1 top outer and 1 top front behind grill, u need to remove the top center black cover and 1 bottom side outer need to remove the inner finder liner to get to the 3rd bolt.
hope that helps, it is stupid

Mar 09, 2009 | 2008 Dodge Avenger

Not finding what you are looking for?
Cars & Trucks Logo

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides