Question about 2001 Dodge Intrepid

1 Answer

What is the hose called from the radiator reservior?

I was driving my 2001 Intrepid in autostick and noticed when I stopped. I had the radiator fluid gushing out from the bottom. I purchased the upper and lower radiator hoses and that's not the problem. I was told the hose I need from the supply of the radiator reservior is rubber on the outside and metal on the inside. What is this hose called??

Posted by on

  • tai_boyer Feb 02, 2010

    transfer pipe

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

It should be a radiator overflow hose. If it is the one that goes from the radiator to the overflow tank. It is usually about 3/8 i.d. hose.

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 ford winstar mini van, I drove it about 700 miles on a vacation, I parked the car at my sister's house it sat for about 4 hours, then started to drive for another 2 hours. I noticed some...


There are 2 cooling hoses that go to the radiator from the transmission. Hopefully it's one of these. The hoses are at the front of the vehicle or the right side standing in front of the vehicle. the stretch across the front to the left side. They are mostly metal ,but there is some rubber hose to it. The hoses connect to the radiator on the left side at the top and bottom of the radiator. If the hose blew out you can fix this with some new transmission hose. You will need a tube cutter, two hose clamps,a screwdriver, a razor blade/knife and 2 feet of hose just to be safe. Cut the metal tubing on each side of the rubber hose, cut enough new hose to go in it's place and use the hose clamps to secure it. If for some reason the metal tubing is bad,rust, you can do the same thing.

Jul 04, 2011 | 2001 Ford Windstar

1 Answer

How do I find a coolant leak in my 2001 Dodge Intrepid 3.2L? It does not appear to be the hoses, but I notice the passenger side of the radiator is wet. Noticed puddle of coolant under passenger side of...


HI, The easiest way to find a cooling system leak to preform a pressure test. This test requires the use of some special equipment so I will just give you some common areas of these engines that leak. 1. check the upper radiator hose at the radiator. the plastic tank cracks sometimes. 2. check around the thermostat housing. 3. The worse for last there is a coolant passage tube that runs under the intake manifold almost impossible to see without taking things apart. but when it leaks the coolant seems to show up n the floor on the passenger side back by the firewall. I hope these help and you can locate the problem. Be careful when looking for these problems when the engine is hot you can get burnt. Good luck

Aug 27, 2010 | 2001 Dodge Intrepid

1 Answer

Odd 2001 Dodge Intrepid symptoms


You either have a thermostat or water pump problem. car is getting hot. Check to make sure you have no water leaks on the hoses or radiator. to check the thermostat,run the engine for awhile to get it hot and touch the upper radiator hose to see if it is hot . If so then the thermostat is working and the problem would be the water pump. hope this will help you.

May 12, 2010 | 2001 Dodge Intrepid

1 Answer

I have a 2001 dodge intrepid it runs hot, the water bubbles out of the place under the hood it doesnt leak the water but it is empty after you drive it?


Check the upper radiator hose by touching it after you have run the car for awhile to see if it is hot. If so then the water is circulating in the system, if not then the upper radiator hose will be cold and the thermostat is stuck. replace the thermostat and your problem will fixed. Be sure to disconnect the negative ground wire from battery before you attempt to work on coolant system. hope this will help you.

May 11, 2010 | 2001 Dodge Intrepid

1 Answer

2000 ford ranger 3.0 v6 engine.coolant being forced into the reservior and both top and bottom hoses at radiator are collapsing.i have replaced the thermostat.whats could be problem


It's normal for some fluid to be forced into the reservoir during operation due to fluid expansion and pressure. Usually the fluid in the reservoir will increase or decrease depending on what temperature the engine is at. Unless your truck is overheating I woudn't worry too much; just make sure the fluid level doesn't get too low or too high in the reservoir. If it is running hotter than normal and excessive amounts of fluid are being forced in to the reservoir you might have a blown head gasket. As far as the hoses collapsing; I have a 2001 Ford ranger 4.0 V6 and I noticed that the top radiator hose appeared to be collapsing in one of its bends. I installed a radiator clamp on the hose at that spot just to keep it round and from pinching itself off. It probably happens from the heat; just keep an eye on it. It may be that your hoses need replacing; I know mine did the same thing after just having been installed brand new though. God bless you and I hope everything works out for the best!!! : )

Apr 04, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Trans, cooler ? Does the Dodge 2002 Intrepid have a transmission cooler, in front of or near the radiator, if so can fluid leaks occur after replacing the main radiator on the car. Have one that has leaked...


Hi:
You are correct. Almost all automatic cars have a transmission cooler connected to the radiator with 2 hoses, near the bottom. If the hoses are leaking or not installed correctly, all of the fluid from your transmission will get pumped out on the ground, and you won't be able to move the car. Inspect the two hoses and hopefully you will find your problem.

Feb 10, 2010 | 2002 Dodge Intrepid

2 Answers

My 2001 Kia Sportage is overheating. This was a sudden issue. The fan is not turning on and I noticed that the radiator fluid was leaking from a hose below and in between the motor and battery. What could...


first rectify the leakages! then ensure that the thermo sensor is in good condition! if it is then change your engine control unit after checking that the fan are working!

Jun 16, 2009 | 2001 Kia Sportage

2 Answers

2004 Dodge Stratus 2.7 thermostat location


Finding the thermostat: Follow the LOWER radiator hose to where it meets the engine. It's in there. Most cars that I've worked on have the thermostat at the end of the upper radiator hose, but not this car. Replacing the thermostat: You need to remove the thermostat housing. (It's the piece that the lower radiator hose connects to.) - You do not need to remove the radiator hose from the housing. - First remove the bolt that is holding a bracket. This bracket just holds some wires in place. - Now remove the three bolts that hold the housing to the engine block. These bolts can be fairly hard to turn, but just keep trying. - Gently pry the housing away from the engine block. You can use a flat-head screwdriver to help pry, but do not scratch the mating surfaces of the housing and the block. - Pull out the thermostat, noting that the spring end goes into the engine. - When you put the new thermostat in, you probably want to use a new black rubber gasket, but you might be able to use the old one if you have no choice. Also, I didn't add any permatex or anything and it seems fine. - I tightened the bolts to 22foot pounds, but this might be a little high. Whatever you do, DO NOT overtighten the bolts. Couple other notes: I first removed the air cleaner cover and tubes to get a little more working room. I also unplugged one wiring harness to make more room. Otherwise, I was able to get my big hands in there. A new thermostat did not fix my problem. Here is a description of the problem I was having and the solution: Problem: The temperature gauge was spiking occasionally, all the way into the red. It would spike up and come back to normal. It would spike usually while in idle, but sometimes while driving. Usually about once every twenty minutes. Things I checked first: - The plastic reservior for the radiator was full to the top. - The electric fans were running, and running on high speed. - The car had working heat. - Replaced the thermostat. Did nothing to help the problem. Problem Found: - Vapor lock. Even though the reservior was full of fluid, it had previously gotten too low and the system sucked in some air. Once that happens, it doesn't matter if the reservior is full, the cooling system will not draw in the coolant. This is because filling the plastic reservior does not pour coolant directly into the cooling system. The coolant is sucked into the cooling system through a tube, like drinking soda through a straw. So the reservior, where they tell you to add coolant, was full but the cooling system (radiator, engine, pump, etc.) was almost out of coolant and wasn't able to draw in any more. Solution: When the engine is cool, open the metal radiator cap that's sticking right up out of the engine. It can be found by following the upper radiator hose to the engine. There is a tall metal tube with a metal cap on it. Pull that cap off (when it not hot) and fill it up with radiator fluid. (I use radiator fluid that's pre-diluted and designed for all makes and models of cars). Idle the car, in park, for about thirty seconds. Stop the engine and put the cap back on. If you're lucky, all the air bubbles are out of the system and you're all set.

Dec 02, 2008 | 2004 Dodge Stratus

Not finding what you are looking for?
2001 Dodge Intrepid Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...