Question about 2006 Ford F 350 Super Duty

2 Answers

What is a tbc fault on a 2006 ford f350 6.0

What is a tbc fault on a 2006 ford f350 6.0 powerstroke

Posted by on

  • yadayada
    yadayada May 11, 2010

    that is no how it owrks run the test get the code.

  • Anonymous Mar 13, 2014

    Where is the turning light fuse located

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

That is your trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code.

Posted on Feb 03, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Bad Fues caused problim. TBC Fault 2006 Ford 350 4x4 King Ranch. To correct ths problim I checked the Trailer connection all looked ok, no corrosion, no moisture no dirt. Checked all connections for power to lights, all ok
Checked fuses this is where I found the problim. I checked all fused that had anything to do with trailer braking, or trailer towing. There are many. Check your owners manual for fuse box location and information. Ford F 350 2006 was under steering colum. The fuse that caused the problim was the charging trailor Battery fuse. this fuse allowes a battry on the trailer to be charged in case there is a brakeaway of the trailer from truck the brakes on the trailer will lock up. If any of the fuses that have anything to do with trailer towing is bad this will give a TBC Fault.
HOpe this helps.

Posted on Aug 25, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why would a TBC fault on a 2006 ford f350 keep the truck from turning on?


Not sure, but read another person had same situation. They replaced the trailer wiring harness and fixed the problem.

Aug 04, 2014 | Ford F-350 Cars & Trucks

1 Answer

Wont start, cranks over, shows tbc fault,


the tbc fault has nothing to do with it... it stands for trailer brake controller fault. as for the no start... could be many things

Jan 22, 2011 | 2005 Ford F 350 Super Duty

1 Answer

Truck displaying "TBC FAULT" while driving. What


It may possibly store DTCs. If not.. PINPOINT TEST H: THE INSTRUMENT CLUSTER DISPLAYS "TBC FAULT"

Test Step Result / Action to Take
H1 CHECK FOR THE PRESENCE OF A TRAILER BRAKE CONTROL (TBC) MODULE AND BRAKE PRESSURE TRANSDUCER
Verify that the vehicle is equipped with a TBC module in the instrument panel and a brake pressure transducer on the master cylinder.
Is the vehicle equipped with a TBC module and a brake pressure transducer?
Yes
GO to H2.

No
If the vehicle has a brake pressure transducer but not a TBC module, INSTALL a TBC module. CLEAR the DTCs. REPEAT the self-test.

- If the vehicle has a TBC module but does not have a brake pressure transducer, GO to H4 .

- If the vehicle has neither a TBC module nor a brake pressure transducer, GO to H3 .

H2 CHECK TBC MODULE COMMUNICATIONS
Using the scan tool, access the TBC module. Does the scan tool communicate with the TBC module?
Yes
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

No
Go To Pinpoint Test a.

H3 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.

Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a trailer brake retrofit kit. CLEAR the DTCs. REPEAT the self-test.

No
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

H4 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.
Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a brake pressure transducer. Make sure to LUBRICATE the O-ring seal with clean, specified brake fluid before installation. RECONFIGURE the instrument cluster for trailer brakes, REFER to Programmable Parameters in this section. CLEAR the DTCs. REPEAT the self-test.

No
REMOVE the TBC module and install the storage bin.

Hope this helps; keep us updated.

Jan 17, 2011 | 2007 Ford Super Duty King Ranch

2 Answers

What does tbc fault mean on a 2006 f350


TBC means Trailer Brake Controller fault.Check for moisture/water in the trailer plug connector at the back of your truck. Water/moisture will cause TBC error codes. Look for moisture at all connections to the plug and inside the plug.Trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code. ----- It means either A) you have a bad ground on your trailer. Or B) your cable on your trailer is too short and causing it to pull out of the plug or C) you have a short in the factory trailer harness wiring or the plug is gunked up. --------- get this possibilities checked.It will help.Thanks.Helpmech.

Dec 24, 2010 | 2006 Ford F 350 Super Duty

1 Answer

If my f350 reads TBC Fault does that mean i need to change the controller


not sure if you need to change it but 05 and 06 f350 are haveing a lot of issues with this you might want to see if they have a recall....Sorry I cant help futher

Dec 04, 2010 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
Cars & Trucks Logo

10,753 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75235 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...