Question about 2003 Chevrolet Venture Passanger

1 Answer

No crank on ignition would like to see a diagram on this if you can help with that would be great thanks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check the alarm and see if it's on.. Shut door firmly(drivers). Lock and unlock 3 times with the key. Try and start car. Sorry I don't have a diagram. If this doesn't work, check for power on the starter relay in the box under the hood. If you have no coil activation during the crank cycle, take it to the dealer and have the computer reflashed if there are no codes in the computer and the neutral safety switch is operating.

Posted on Feb 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 BMW 325i with a no crank situation. Put in a new starter and I can't get power to the ignition signal wire going to the starter.


A wiring diagram for your car would be a great help identifying possible fault points and checking the starter circuit with a meter or testlamp.

From your description it would seem there isn't an immobiliser but be aware early transponder keys were identical to ordinary plastic bodied keys.

Firstly ensure the engine will crank by energising the starter manually and then check the ignition/starter switch is doing the job and delivering a starter current into the correct wire. If that is ok the wire is either broken or there is a relay in circuit that is deprived of operating current or is faulty.

Feb 04, 2017 | BMW Cars & Trucks

1 Answer

91 Cherokee will crank but won't fire. Replaced


how much is the RPM showing in the datatlogger while cranking?

Dec 03, 2012 | Cars & Trucks

1 Answer

Fixed the fuelpump, fixed the crank sensor.... i own a 1996 dodge grand_caravan 3.3 ltr engine and every time i turn right the engine stalls... looking for a way to print out computer diagram that runs to...


Hi!!
Replace the Power Steering (PS) Pressure Switch. I had a few of those Caravans with the same problem.
Good Luck and Merry Christmas!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Dec 17, 2010 | Dodge Grand Caravan Cars & Trucks

1 Answer

My 1990 camaro rs 305 2 barrel carb doesnt want to start it turns over when i crank it but its not catching i was told it might be my ignition that might not have a spark can anyone help? ps two small...


Please see my tip at http://www.fixya.com/cars/r5821173-doesnt_car_start_gasoline_engines . Do the spark test mentioned there. If there is no spark, replace the coil. I am attaching the ignition wiring diagram and 2 vacuum diagrams--one for auto trans and one for stick shift. Let me know if you have any questions.


562e916.gifb42b853.gifa9a5a46.gif

Oct 10, 2010 | 1990 Chevrolet Camaro

3 Answers

Start's great at times,then won't turn over,starters good


yes the switch would cause that problem with the brake light but not the dash lights, these cars had problems with the ignition swith and the chip reader on the ignition, hope this helps.

Jan 20, 2010 | 1998 Oldsmobile Intrigue

1 Answer

Crank no start


JUST REMEMBER THE BASICS,COMP./SPARK/FUEL,IF ONES MISSING ,NO CRANK

Aug 20, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

1992 Honda Accord died


Ignition coil, transistor, rotor, distributor cap or other component in ignition circuit like ignition switch- may crank but no spark. In that order. Good luck.

May 09, 2009 | 1992 Honda Accord

1 Answer

98 Lincoln Town Car CRANKS NO SPARK


6 or 8 cylinder ? Do you know how to test for B+ voltage with a test light or a volt meter ? Look at a wiring diagram so you know which wires should have B+ voltage . You can find free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine . Under system click on engine ,then under subsystem click on ignition . Click the search button then the blue link . Looking at a wiring diagram i see this vehicle should have (COP) coil on plug ignition . That means it has a coil for every cylinder an not coil pack .
Autolite Coil on Plug Ignition troubleshooting

Jun 21, 2017 | 1998 Lincoln Town Car

2 Answers

Engine shuts off when it gets warm


Try crank position sensor, it's common for those to stop working when they heat up

Jun 09, 2008 | 1999 Saturn SL

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...