Question about 1999 Chevrolet Blazer

1 Answer

1999 S10 blazer 4.3. need to replace lower intake gaskets. went and bought the kit and the kit has upper and lower intake gaskets with it. do i need to replace them all?? the kit also came with gasket silicone, i dont want to use this on the lower gaskets do i?? any tips or tricks on doing this job

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

If your going to replace the lower intake and the set came with the upper why not replace it, your removing it any way.the silicone you need to used it at the 4 corners where the heads meet the engine block or you will have leaks.

Posted on Feb 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2000 explorer 4.0 Soho do I have to remove the injectors to remove the lower intake


REMOVE UPER INTAKE 97 EXPLORER V6 4.0 - YouTube

? 12:22
https://www.youtube.com/watch?v=ugExJ0wkP8A
Jun 11, 2013 - Uploaded by Sum Guy
REMOVE UPER INTAKE 97 EXPLORER V6 4.0 ... I was told that all I have to do is remove the fan belt to get access to it ... FordExplorer 2000 intake manifold gasket upper lower P0174 by froggy - Duration: 36:54. by froggy 36,588 views ... Ford Explorer 4.0L SOHC Rough Idle P0171 P0174 Lean Codes ...

Putting the lower intake on my 1997 Ford Explorer 4.0 OHV ...

? 5:23
https://www.youtube.com/watch?v=qKE1vPxqPHs
Jun 27, 2010 - Uploaded by origionaldz
Putting the lower intake on my 1997 Ford Explorer 4.0 OHV sport .... I do have a 2000 5.0 ... @michaelheiland123654 To dothis job, you have to remove the alternator, unbolt the AC compressor, remove upper intake manifold, remove fuel rail,remove all injectors, ... Do you have the SOHC or OHV version?

1999 Ford Explorer 4.0L -need assistance on removing upper intake ...

www.automotiveforums.com > ... > Ford > Explorer ' Explorer Sport Trac
Sep 20, 2011 - 1999 Ford Explorer 4.0L -need assistance on removing upper intake ...Are you sure you have the OHV/pushrod engine and not the SOHC engine? ... Do youhave the upper intake manifold loose, you just are unable to ... the lower intake gasket, valve cover gaskets, Injector o-rings, plugs and wires. Thanks ...

How to replace upper intake manifold gaskets - Ford Explorer




Dec 09, 2015 | Cars & Trucks

1 Answer

How do I remove and re install the CPI unit and gaskets on a 1998 Chevy Blazer with Vortec V6


You have to reove the upper plenum. that is the part on top of the intake that looks like a dome on top of the lower intake.There is 8 10mm bolts around the outside of the dome part. the disconnect the fuel lines at back of lower intake and remove the cpi unit.

Sep 12, 2014 | 1998 Chevrolet Blazer

1 Answer

S10 1999 pickup blew 4th spark plug 3 x's ,used a helicoil kit, now motor is smoking, whats the solution now?


It sounds like the area near the #4 spark plug is getting hotter than normal. Maybe an intake valve is not closing the whole way, thus letting the heat come out of the cylinder. I would get a cheap laser thermal dectector and measure the heat there compared to the other spark plug areas.

Dec 17, 2017 | Cars & Trucks

1 Answer

WOULD LIKE THE PART NUMBER FOR REBUILD KIT TO A 1999 F150 4.6L ENGINE. COMPLETE SET AND GASKET SET ONLY PLEASE.


the 'kit' that you are looking for varies from parts distributors. if you are going to the dealership for this then you will be getting a very long list of numbers that you really don't need any how. If you are replacing the gaskets for this vehicle then you want to go to the local parts store and ask for the "upper gasket kit" for (insert vehicle here) and then you will get what you are looking for. if you are looking to rebuild the bottom end, the block, then you want to get the "lower gasket kit" but a good upper gasket kit (ie. Felpro, Victor Reins, etc...) then you should get a head gasket, valve cover gasket, and intake and exhaust gaskets. the lower gasket kit can include but not always (you should ask what gaskets come in it) oil pan, freeze plugs, and front and rear main seals.

Apr 18, 2011 | Ford F-150 Cars & Trucks

1 Answer

Intake manifold 1996 Blazer S10


do you mean the valve cover ? because I don't think you can have the intake manifold backward.(if it's backward, you cannot connect the upper hose and the fuel lines)
so any way, it sound like you have the valve cover swapped. it won't hurt to drive but it is a problem to fill the engine oil as you stated.

Apr 21, 2010 | 2002 Chevrolet Blazer

2 Answers

Ruff running


there are many vacuum hoses,i dont know if this is a s10 or full size blazer, heres a diagram for the s 10 blazer with the 4.3 if this is not your engine let me know, but heres a diagram, just look over all the lines, hope this helps.446c260.gif

Mar 29, 2010 | 1999 Chevrolet Blazer

1 Answer

My blazer started this morning but was leaking antifreeze on the ground. I don't think its the water pump. could it be the intake manafold gasket? it seems to be leaking at the front of the intake.


It would either be the intake gasket, thermostat housing gasket,upper hose at the thermostat housing,or the heater hose that enters the intake.

Feb 09, 2010 | 1999 Chevrolet Blazer

1 Answer

Blown upper air intake manifold on gm 3800 series two engine


Parts stores carry a kit including a manifold and gaskets. When I do the job I always replace the lower intake gaskets because they leak too. Make sure the lower manifold is not warped around the rubber gaskets towards the throttle body side, a new or used loewr manifold might be needed to ensure a correct repair.

Sep 22, 2009 | 1998 Buick LeSabre

1 Answer

99 blazer fuel body meter moves (spiderinjection)


Have u replaced spark plugs,wires and where is ur collant leakn from,,,,but on the other hand,,,if ur experincing blue smoke coming from out from the exhast pipe(intake gaskets need to b replaced)but that depends where ur coolant is leakn from,,,,

Jun 12, 2009 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...