Question about 1997 Buick LeSabre

1 Answer

1997 buick lasabre. How do you remove the front left door panal. The window does not work. When I press the switch I can here it click

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Buick Master
  • 655 Answers

Make sure the switch itself isn't bad. Pull the power window control assembly. I think there is a clip in one end that you push and the panel pops out. The switches are interchangeable so just swap one of the GOOD ones for the driver's switch and see what happens.
If you have to remove the panel, go to O'Reilly's or AutoZone and get a door panel removal tool. This will pop the plastic clips around the door panel. You may break a few but replacements are at the Auto store also. If I remember right, there are 2 large screws that secure the armrest to the door. Might be hidden under a plastic trim plate. BE CAREFUL plastic breaks. Good Luck

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 buick lasabre front window wont go up. How can i get it to go up without purchasing any parts


you will need to remove the door trim to see what has gone wrong or do some checks in the electrics before you can do anything.
basically if something has broken ,even a fuse ,you will need to buy parts

Aug 29, 2015 | Buick Cars & Trucks

1 Answer

Buick 2002 LaSabre Custom all windows do not go up and down, door lock/unlock switch drivers side does not work(passenger & rear doors lock/unlock door switches work, trunk release button does n


coulb be the control switch on your panel you can take the door panel off and check for loose connections and try to test for continuity. if you dont know how take it to a shop and have them diagnose the electrical. im quite sure it the switch that burnt out

Oct 24, 2012 | 2002 Buick LeSabre

2 Answers

How to remove ford taurus window switch


Door Panels

Print


REMOVAL & INSTALLATION

See Figures 1 through 8
This procedure applies to both the front and rear door panels.


0900c152802604e4.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Remove the cover from behind the inside door handle by gently pulling it out to release the retaining tabs


0900c152802604e5.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Remove the pull cup retaining screw cover and...


0900c152802604e6.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: ... remove the retaining screw from the cup and lift the cup straight up out of the door panel


0900c152802604e7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Remove the two sail panel/speaker grille retaining screws and...


0900c1528026022f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 5: ... remove the panel/grille from the door


0900c152802604e8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 6: The door panel is retained to the door by 11 retaining clips


0900c152802604e9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 7: Carefully lift the door panel off of the door and...


0900c152802604ea.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 8: ... detach the electrical connectors from the switches and remove the panel from the vehicle

  1. Remove the cover behind the inside door handle.
  2. Remove the screw from the bottom of the pull cup retaining the front door trim panel to the front door.
  3. Remove the two screws retaining the sail panel/speaker grille assembly and remove the panel/grille from the door.
  4. Remove the three screws retaining the front door trim panel to the front door.

Do not attempt to remove more than one pushpin at a time.
  1. Use a suitable tool to remove the pushpins from the door.
  2. Carefully lift the door panel away from the door.
  3. Detach the electrical connectors as necessary and remove the panel from the door.

To install:
  1. Installation is the reverse of removal.

Aug 15, 2012 | 1998 Ford Taurus

1 Answer

Driver side front door window will not move. Some sound, but no movement. How to Replace Window motor regulator on this 2000 Buick LaSabre Limited driver's door with multiple controls: Locks, speakers,...


First the door panel must be removed,then you can tell what part is broken.It will probably be the window trac assy.To replace that you must drill out the 3/16 rivets that hold it in and then replacethem with 1/4 -20 bolts on re-assembly.

Aug 05, 2010 | 2000 Buick LeSabre

1 Answer

How to install side mirror on 97 buick lasabre


You'll need to remove the door panel. Once you do that you'll see the electrical connections and the screws holding it in place. Disconnect the plug and remove the screws. THe mirror will pop off and you can install the new one.

Dec 15, 2009 | 1997 Buick LeSabre

1 Answer

Power Windows


take the door panal back off. Using a test light disconnect the window motor and run your test light across the two termails hook the switch up and run the switch up and down. If the light lights then the window motor is no good. If the light does not light check to see that there is power going to the switch. Another place to check is in the body to door pass throught sometime the wires brake there

Sep 17, 2009 | Buick Century Cars & Trucks

1 Answer

How do i remove the rear passanger 2000buick lasabre door panel.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 08, 2009 | 2000 Buick LeSabre

1 Answer

Remove right rear door panel 2003 Buick LaSabre


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Nov 02, 2008 | 2003 Buick LeSabre

Not finding what you are looking for?
1997 Buick LeSabre Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...