Question about 2005 Jaguar X-Type

1 Answer

I have a 2005 Jaguar X-Type. Replacement of driver side headlamp

I have a 2005 X-Type. Can I replace the driver side headlight bulb from inside the engine compartment after I remove the battery? Or does the bumper cover need to be removed and the lamp assembly taken out from the front?

Posted by on

  • Jerome Casper Feb 02, 2010

    I'll give it a try!! Looks like it can be done, but I had read that the "manual" tells you to take the bumper apart.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,428 Answers

Yes you can replace the driver side headlight bulb from inside the engine compartment after removing the battery.

Take care and be careful.

Good luck and remember to rate this solution.

Posted on Feb 02, 2010

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change headlight 2003the x type Jaguar


look inside owners manual in glove compartment look up bulb replacement in the back index it will show and tell you how to replace headlight bulbs. be sure to wear clean gloves, because headlight bulbs or halogen type bulbs, if oil from hands or skin touch the halogen bulb it will cause halogen light bulb overheat and blow out.you can go by auto parts store when you buy new headlight bulb the salesperson will go out to vechicle and replace headlight bulb for you wont charge you any thing.just charge you for the headlight bulb.

Feb 12, 2012 | 2003 Jaguar X-Type

1 Answer

Changing Low Beam Headlamp Replacement 2005 Mazda 3.


Check out the following:
It's not easy. You need a flashlight. First, take the batter vent assembly off by removing the screw over the headlamp assembly. Open the battery box by snapping off the tabs, lift out, and move the vent to the side. Second, disconnect the headlight wire by pressing down on the opposing tabs located on the side of the connector and pull straight back. Move the wire to the side. Next, peel the rubber fitting around the bulb (located on the back of the headlamp assembly). Look inside the headlamp assembly with a flashlight to see what you got yourself into. You'll have to unhook the retainer wire that holds the bulb in place. This requires you to push the top part of the wire toward the front of the car and lift up. The wire should swing to the left (passenger side) releasing the bulb and bulb housing. Pull the old bulb out of the housing (it might be tight), replace with the new one (try not to touch the glass). Replace the bulb/housing. Make sure the little tap fits back into its slot (upper diver side). Push the wire clamp back over the bulb, pushing up back and down making sure it's hooked and your done. It seems easy once you've done it.
Good luck! EJ Kudelka

Nov 09, 2010 | 2005 Mazda 3

1 Answer

How to change headlight fo 2005 chevrolet uplander


Headlamp Removal & Installation Bulb Replacement To Remove:
  1. Remove the Headlamp Assembly. Headlamp bulbs gm-06-00-3206.gif

  2. Turn the high/low beam bulb socket counterclockwise to remove.
To Install:
  1. Turn the high/low beam bulb socket clockwise to install.
  2. Install the Headlamp Assembly.
Headlamp Assembly (Park, Turn, Cornering and Side Marker Lamps) To Remove:
Headlamp assembly R &I gm-06-00-3207.gif

  1. Rotate the headlamp assembly retainer pins and pull up to remove.
  2. Remove the mounting bolts.
  3. Disconnect the harness connectors.
To Install:
  1. Connect the harness connectors.
  2. Position the headlamp assembly on the panel.
  3. Rotate the retainer pins and push down to lock in place.
  4. Install and secure the mounting bolts.
prev.gif next.gif

Oct 07, 2010 | 2005 Chevrolet Uplander

1 Answer

How to change the headlight bulb on 2009 gmc sierra driver side


1. Loosen only, do not remove, the lower outside hidden headlamp bolt (2). 2. Depress the housing support tab with a flat-bladed tool downward in order to release the headlamp assembly from the support. 3. Pull the lamp assembly slightly forward to access the electrical connection. 4. Disconnect the forward lamp harness main electrical connector from the headlamp harness.
Headlamp Screws (Qty: 2)
1 Caution: Refer to Fastener Caution .
6 Nm (53 lb in)
O Headlamp Screw (Hidden)
6 Nm (53 lb in)
3 Headlamp Housing Support


Preliminary Procedure Remove Healamp
Remove either the LF or RF headlamp assembly. Refer to Headlamp Replacement (Chevrolet) Headlamp Replacement (GMC HD)
Headlamp Replacement (HD Diesel).
Headlamp Bulb (Hi)
Warning: Refer to Haiogen Bulb Warning .
Tip: Rotate the bulb socket a quarter turn counterclockwise and remove the bulb from the headlamp.
Headlamp Bulb (Lo)
Tip: Rotate the bulb socket a quarter turn counterclockwise and remove the bulb from the headlamp.

Need more come to https://www.autorepairhelp.us


change-headlight-bulb-2009-gmc-1pzbcmqursjjtd0qcfo11o2t-2-0.png change-headlight-bulb-2009-gmc-1pzbcmqursjjtd0qcfo11o2t-2-1.png

Aug 14, 2010 | 2008 GMC Sierra 2500HD 2WD

2 Answers

How do you change the headlamp in a 2004 jaguar x-type 3.0?


Open the bonet and look directly behind the headlamp and you should see a black plastic cover with 2 steel clips holding it onto the headlamp. Push the clips to the side and remove the cover. Do not remove completley as it will be difficult to refit. Just so you can get you hand to remove the connector. Remove and replace bulb

Jun 04, 2010 | 2004 Jaguar X-Type

1 Answer

Need to replace the low beam headlight on drivers side


there is a cover in front of battery or ABS module depending on which bulb is blown, is held on with 2 spring clips, pop off clips, cover can be moved aside. becarefull have seen connector melt to headlight bulb requiring replacement as well. DO NOT touch the bulb by the glass.

Mar 23, 2009 | 2005 Jaguar X-Type

1 Answer

Driver's side Headlight Bulb Replacement


Do you mean the entire headlight assembly or just the bulb?
If it's the entire headlamp look at the new one to see where the fastening points are, the grill may have to be removed and also the parking lamp lens, if it's just the bulb it's easy Open your hood look at the back of the headlight assembly and twist the bulb holder ring to release it. Good Luck To You

Jan 20, 2009 | 2008 Honda Element

1 Answer

One headlamp is out (drivers side), need to know how to change


hid lights are brighter and you do not have a headlamp level adjuster below the headlamp switch  D

Dec 08, 2008 | 2005 Jaguar X-Type

2 Answers

Nissan terrano headlight


check out
http://www.sferamydlo.com.pl/Zbyszek/Nissan/R20/el.pdf


Bulb Replacement
The headlamp is a semi-sealed beam type which uses a replacable
halogen bulb. The bulb can be replaced from the engine compartment
side without removing the headlamp body.
I Grasp only the plastic base when handling the bulb. Never
touch the glass envelope.
1. Disconnect the battery cable.
2. Disconnect the harness connector from the back side of the
bulb.
3. Pull off the rubber cap.
4. Press end of the retaining pin together to release bulb.
5. Remove the headlamp bulb. Do not shake or rotate the bulb
when removing it.
6. Install the new bulb in reverse order of removal.

Nov 11, 2008 | 2005 Nissan Pathfinder

2 Answers

1988 Jaguar Vanden replace headlight


What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.

May 18, 2008 | 2000 Jaguar Den Plas Supercharged

Not finding what you are looking for?
2005 Jaguar X-Type Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...