Question about 1994 Oldsmobile Cutlass Ciera

1 Answer

My turn signals aren't working, I've checked all the bulbs & fuses and they're not malfunctioning

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Oldsmobile Master
  • 2,007 Answers

If they are coming on, but not flashing, then change the flasher. Not sure which part is not working from reading your post.

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).


sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck

Jul 08, 2016 | 1997 Plymouth Voyager

1 Answer

My turn signals don't work and I've checked the bulbs, fuses & flasher.


About all that is left on the list is the turn signal switch.
Do you have power in and out of the switch ?

Feb 04, 2013 | 1995 Buick Skylark

1 Answer

Front left turn signal doesnt work


The turn signal circuit is different from the parking lights. So the headlights would not be involved.
You should have power on one side of the bulb for parking lights and the other for turn signals.
If you have no power for the turn signal circuit, I would look at the turn signal switch. It powers each bulb separately.

Aug 21, 2012 | 2005 Saturn Ion 2

1 Answer

Rear Turn signal is not working


Aren't your brake lights and turn signal lights on the same bulb, same filament? Recheck the bulb in the rear, as the rapid blinking is an indication of a burnt out bulb. If the bulb is the correct one and is good, check the connector and socket at the housing for a loose or poor connection.

May 26, 2012 | Dodge Durango Cars & Trucks

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

1 Answer

Brake lights aren't working changed fuses and bulbs could it be the turn signal light switch?


the turn signal light switch has nothing to do with the brake lights,the problem is most likely the brake light switch which you should find around the area of the brake pedal it may be faulty or has come loose & needs to be adjusted & tightened back up........hope this helps......cheers.

Sep 03, 2011 | 1986 Toyota Pickup 4WD

1 Answer

My dad jumped his work truck with my 99ford escort zk2 and I think that he hook the pos to the neg. Well all the bulbs blew and the windshield wipers run non stop when fuse is in. Have everything fixed...


check all the fuses with a meter , not just by sight, then, look under the hood for the fuse block there, check those fuses also, especially the main fuses, 30 amp and above,, with any luck he didn't blow out your computer

Aug 08, 2011 | Ford Escort Cars & Trucks

1 Answer

Where are the fuses for the turn signals. Have the manual but cant find location! My left turn signal is not working on the motorhome


IF A FUSE WAS BLOWN BOTH SIDES WOULD BE INOPERATIVE ,, MOST LIKELY A BLOWN BULB OR CONNECTION PROBLEM OR POSSIBLE SWITCH MALFUNCTION . TURN FLASHERS ON AND SEE IF BOTH SIGNALS WORK WHEN REPLACING BULBS USE DIELECTRIC GREASE TO PROTECT AGAINST CORROSION

HOPE THIS HELPS

Aug 07, 2010 | 1995 Ford F350

2 Answers

Turn signal doesnt flash when turned on???


If your turn signal indicator is coming on but won't flash, it is caused by one of two things.
  1. A burned out bulb (or a bad circuit to the bulb)
Check ALL the bulbs. Does it flash in one direction and not the other? The side that is not flashing will have a bulb that is not working. It may be a front bulb or a rear bulb, so check them all. Also make sure that there are the same number of bulbs illuminating on both sides. Some cars have 2 turn signal bulbs on each side in the rear. At first glance it may look like they are all working, then when you look closer you may find that only one bulb is illuminating on one side while there are two on the other.

2. If both sides are malfunctioning and you are certain that all the bulbs that are supposed to light with the turn signals are working, then replace your flasher unit.

Nov 11, 2009 | 1995 Buick Century

1 Answer

2003 ford expedition tail turn signal light dont work bulbs are ok


You say the rear tail turn signals are not working are the fronts working? If the fronts work and the rears don't then you have a wire issue. Check the grounds for the tail lights or check and see if a trailer wire harness was put in by splicing the wires. Also check for brake lights and see if they work should be same bulb. If the fronts do not work either check fuse 18 in the fuse box should be a 10 amp or check brake fuse 2 which is a 20 amp

Jul 06, 2009 | 2006 Ford Expedition

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...