Question about 1997 Land Rover Defender 90

1 Answer

Have hella 24v flasher unit with pins 30,49 and 49a how do i connect it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Land Rover Master
  • 2,030 Answers

Pin 30 is from your power source
pins 49 and 49a goto the lights themselves

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).


sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck

Jul 08, 2016 | 1997 Plymouth Voyager

1 Answer

Turn signal flasher oldsmobile achieva 94 not flashing how do i fix


light goes on but doesn't blink is typical of a bad flasher unit. Flasher units usualy have two wire connections. Flashers can be round or square. Try replacing flasher with another known working flasher unit.

Apr 30, 2012 | 1994 Oldsmobile Achieva Special Edition

1 Answer

I have an 85 Mazda RX7 and have replaced all


Taking flasher control away from the CPU is not difficult. I had to do this on an 81 a few weeks ago as flasher was burned out and not able to find a replacment CPU. On the 81 there were only two wires that were involved with flasher control. Both were at one end of the CPU connector. Green with White Stripe was power in from the turn signal switch and Green with Black stripe was output to the turn bulbs. I simply removed the wires from the connector. Soldered in two spade connectors to the wire ends and connected these two wires to a basic 2 pin flasher unit. Works like new!!

May 25, 2011 | Mazda RX-7 Cars & Trucks

1 Answer

Flasher is clicking with signal switch in the off position


First of all check the Flasher relay.The other to check is the ground wiring.Is the wiring's proper or getting short.The flasher is clicking in off position this indicates that its actually turning off.the flasher is still receiving any current to function. so the wiring's needs to be checked and confirmed.The wiring procedure  in 1999 GMC sierra  is as follows:--
The circuit is fairly simple: 12 V power from the ignition relay is brought to the Hazard switch. In the Off position, the 12 v is routed through the Hazard switch to one pin of the flasher. Another pin of the flasher goes to ground. The third pin goes to the turn signal switch, where it is connected to either the left or right signal light circuits. The other side of each bulb is connected to ground. When either the turn signal or Hazard switch is turned on, the current through the flasher causes it open and close its internal contact in the 12 V line, thereby turning the signal lights on and off. So, for the flasher to continue to click when the ignition switch is at ON/OFF (assuming there is no clicking when it is OFF), there must be a connection from the 12 V supply through the flasher and the turn switch. It is possible that there is a wire between the flasher and the turn signal switch that is worn and contacting ground.
Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 1997 GMC Sierra

1 Answer

When left or right direction selected indicator


fit a new flasher unit ,if this doesnt work check the bulbs for dirty connections,and they are actually working also make sure the bulbs are 21watt 12v be surprissed how many times i find 24v bulbs or evan 6watt bulbs

Oct 25, 2009 | 2001 Audi A6

1 Answer

4 way flashers do not work and sometimes my turn signals sto pworking.


try replacing the flasher relay ,,id say thats the problem,,,should be under the dash,,drivers side,,,and it might say flasher on the unit maybe ,,,,,,also thinks it 4 pin when you pull out the plug,,

Apr 21, 2009 | 2002 Saturn VUE

1 Answer

Flasher unit on a 1994 toyota previa


hey there,yeh its under the steering wheel column under the dash..it should have a 4 pin plug in it,,,,disconnect the connection to see if it has 4 pins,if it has thats it...ull get 1 in a breakers yard for about a fiver....

Apr 19, 2009 | 1997 Toyota Previa

2 Answers

Fuse box


Wiring relays and connections – all modelsRelays (typical)

1 Vacant
2 Intake manifold preheating relay (carburettor models) or fuel
pump relay (injection models)
3 Seat belt warning system relay
4 Gearshift indicator control unit
5 Air conditioner relay
6 Dual tone horn relay
7 Relay for foglights and rear foglight
8 Relief relay for X contact
10 Intermittent wash/wipe relay
11 Rear window wiper relay
12 Turn signal flasher or trailer towing warning relay
13 Seat belt warning system (interlock) or rear window, driving
lights and oil pressure warning relay
14 Window lift or seat belt warning system relay
15 Headlight washer relay
16 Control unit for idling speed increase
17 Fuse for rear foglight
18 Control unit for coolant shortage indicator
19 Thermo fuse for window lifters
20 Switch unit for heated driver’s seat
21 Switch unit for heated passenger’s seat
22 Switch unit for overrun cut-off
23 Vacant
24 Vacant
Relays are symbolised as a number in a black box
Not all relays are fitted to all models
Connections
A Multi-pin connector (blue) for dash panel loom
B Multi-pin connector (red) for dash panel loom
C Multi-pin connector (yellow) for engine compartment loom left
D Multi-pin connector (white) for engine compartment loom right
E Multi-pin connector (black) for rear wiring loom
G Single connector
H Multi-pin connector (brown) for air conditioner or wiring loom
K Multi-pin connector (transparent) for seat belt warning system
loom
L Multi-pin connector (black) for lighting switch terminal 56 and
dip and flasher switch terminal 56b (carburettor models) or
multi-pin connector (grey) for dual tone horn (injection models)
M Multi-pin connector (black) for lighting switch terminal 56 and
dip and flasher switch terminal 56b (injection models)
N Single connector for separate fuse (manifold heater element)
P Single connector (terminal 30)
R Not in use
Fuse colours
Blue 5A
Green 30A
Red 10A
Yellow 20A

Jul 17, 2008 | 1987 Volkswagen Jetta

Not finding what you are looking for?
1997 Land Rover Defender 90 Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7699 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...