Question about 1996 Ford Ranger SuperCab

1 Answer

I have a 1996 ford ranger how do i put gear oil in my gear box

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,206 Answers

Im guessing you have a 4x4 well in the rear of the transfer case you will find two plugs that have a square center one is higher than the other the upper one is the fill the bottom is the drain it require u to use the ratchet square drive by itself to remove the plug,now if you are asking about a 2 wheel drive standard transmission its the same thing but located on the side of the transmission,the way to fill it is with a pump container in some cases sold with fluid already in it ask for a pump at the auto parts. hope this helps you..

Posted on Feb 02, 2010

Testimonial: "you guys r great "


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 ford ranger 3.0 fuse box diagram

here is a web site, hope this is what you are looking for! it 's the same from 1996-2007!

Jun 29, 2016 | 2000 Ford Ranger SuperCab

1 Answer

What can cause a 1996 ford ranger no to be going in gear when the vehicle start. It has a manual gear box

if you have replaced the clutch , t will be a clutch plate put in back to front
If it is hydraulic clutch ,it will be a master cylinder or slave cylinder problem
if it is cable clutch , it will be a failed clutch cable

Mar 09, 2016 | 1996 Ford Ranger SuperCab

1 Answer

Diagram of 1996 ford ranger fusebox which fuse is

Here is a diagram of 1996 Ford Ranger fuse box25297289-e4nsevljl1gt44onigrs2by0-5-0.gif

Nov 25, 2014 | 1992 Ford Ranger

1 Answer

My 1996 ford ranger has to be forced into 1st and 2nd gears. its a manual transmission. what would cause this?

Sounds like the clutch is going or the slave or master cylinder is failing. You could have some bad gear synchronizers.

May 02, 2010 | 1996 Ford Ranger SuperCab

1 Answer

What are the timeing marks on a 1996 ford ranger 2.3

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Ford Ranger. Plus additional Instructional and Directional Diagrams.

NOTE: No Markings on the Crankshaft Sprocket, it is deferred to the Oil Pump!

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Mar 19, 2010 | 1996 Ford Ranger SuperCab

2 Answers

Timing marks for 1996 2.3 ranger

I'm pretty sure they had 2.5L 4 cyl's by 1996. I would go to your Local Parts Store & by the manual for that Truck. It's about $25 & well worth it. It will have the Marks & Installation Intrux

Sep 27, 2009 | 1996 Ford Ranger SuperCab

2 Answers

I keep blowing the 30 amp max fuse. I don't know if it is to the ignition or the fuel pump.

look under the top of the power distribution box it has a diagram.
The max fuse blowing means you have a serious short,a hot wire touching ground perhaps it's broken or pinched somewhere.

Aug 12, 2009 | 1996 Ford Ranger SuperCab

1 Answer

94 ranger 4x4 randomly have trouble shifting into gears

try tranny oil change and add lucas atf tranny fluid

Jun 04, 2009 | 1996 Ford Ranger SuperCab

1 Answer

My ford ranger shift hard

Try changing the gear oil to a lower grade.Sounds like the rong grade of oil has been put in it.

May 27, 2009 | 2004 Ford Ranger

1 Answer

Gear stick making noise even worse when towing (Horse box)

If you haven't done it lately, it's time to check your transmission gear oil level.

Jul 18, 2008 | 2001 Ford Ranger Regular Cab

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides