Question about 2000 Chevrolet Silverado 1500

1 Answer

Hum in the front end of Z71 4X4 at 30 mph and above. Feel slight vibration in steering wheel and at gas pedal.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

Have the drive shaft checked out. You may have a bad hub bearing or bad CV joint. Look for cracks in the boot, and grease that has been flung inside wheel well

Posted on Feb 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can be possible problem be? at 10-15 mph very slight vibration in steering wheel and dosn't seem to roll right


Blister or broken steel braid in tire. Lug nut torqued properly? If you suspect tire, move it to the back and see if the noise/vibration migrates with it. The only other guess would be your wheel bearing is failing.

Oct 17, 2015 | 2003 Honda Pilot

1 Answer

Front end wheel vibration between 20 - 30 MPH


May be a rim, a worn ball joint or tie rod end. Could also be a worn inner CV joint binding.

Aug 28, 2014 | 2009 Mitsubishi Galant

1 Answer

Why does front end vibrate at crusing speed


I would say you have a problem with the steering part of car, have a mechanic look at it

Jun 13, 2014 | 2006 Scion xB

2 Answers

FRONT END VIBRATION


The dealer is not going to replace something if they can not prove to the company the part is defective. The company won't pay the warranty claim.
A bent axle was my next guess. A garage could find out by using the same dial indicator used to check for a bent rim.
The dial gauge is placed against the shaft and the wheel is turned, if the axle is bent the dial will move.
I don't know what Road Forced balanced means, but most balancing machines duplicate road speed of about 30MPH. So a tire or wheel can balance ok on a machine but still have a vibration at speeds above 30 or 40mph. The easiest way to make sure is move the front tires to the back and see if the vibration travels too.
If you are describing the problem correctly, it almost has to be in the transmission, the axles, or the wheels. There is a slight chance a strut or strut mount could be faulty and allowing a small bounce to be amplified.

Sep 16, 2012 | 2006 Chevrolet Uplander

1 Answer

Front end vibration


This is usually either wheel balance if you just feel the vibration in the steering wheel, or shock absorbers are worn if you can actually feel the front of the vehicle bouncing.

Aug 23, 2012 | Ford Cars & Trucks

1 Answer

2006 gmc 2500 vibration around 60 mph stops when I let off gas


Usually a vibration is due to one or more parts that have become worn or damaged. I'm not sure why you mentioned the tires but don't disregard them unless you know that they are fine. Check for correct inflation (on the door jam), for uneven tread wear, or bubbles and damage.
Other things that can cause a vibration is the front-end needing an alignment, a tire that is unbalanced, worn out steering components (like a wheel-bearing), defective u-joints and/or an unbalanced drive-shaft, or low gear-oil level in the drive-axle can cause damage to the ring & pinion gear. The damage would primarily be on one side. So when you let off the gas pedal the sound goes away. Check as much as you can and let me know how it is going.

May 20, 2010 | 1995 GMC Sierra C1500

4 Answers

Noise and vibration above 50 mph


Sounds like front differential or front drive axle issues. Check the front differential gear oil then take er' to the dealership before you end up spending a bunch of $. Most people change their oil frequently in the engine but forget about flushing the transmission fluid and changing oil in the front and rear differentials. I have three Ford 4X4s. Two which really get used hard. The 93 has 311K miles and still runs excellent. Trans and differentials get a fluid change every 25K miles and moble one synthetic engine oil changes every 5k miles.

Jan 25, 2009 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...