Question about 2001 Ford F150 Styleside SuperCrew
2001 side mirror turn signals do not work. Fuse or bulb replacements and how??
If the turn signals on the truck work correctly, this would be a bulb issue.
The best directions I have found with pictures are from Muth ( mfgr of signal mirrors ) : www.kwmuth.com
Enter truck info, and on the product listing page are the install directions for download in PDF format. Download, and use the directions to the glass removal. Once the glass is out, you will see the bulb holder for the signal on the edge of the glamor cap, think this is a bulb type 39 ( ??)
Have seen some people just move the glass all the way in ( so the gap is at the signal side of the mirror head ), and work it this way, I have not done this myself.
Posted on Feb 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The Turn Signal Indicator
The Sidemarker Lamp
The Sideview Mirror (Pontiac Thunder only)
The turn signal switch also sends a separate on-off signal to the Daytime Running Lamps (DRL) control module, which relays the signal to the appropriate front turn signal. The front turn signals are grounded at G101 and G102. The rear turn signals are grounded at G401. The sidemarker lamps are grounded through the corresponding front parklamp.
The sideview mirror turn signals are a bank of LEDs placed behind the mirror glass.
The hazard lamps operate on battery voltage. The HAZARD fuse supplies battery voltage to the turn signal switch. When the hazard switch is pressed, the turn signal switch sends battery voltage to the hazard lamp/turn signal flasher, which sends an on-off signal to the turn signal switch. The turn signal switch send the on-off signal to all the turn signal lamps, causing all the lamps to flash including both IPC turn signal indicators. The hazard lamp/turn signal flasher is grounded at G200.
When the parklamps are ON, the sidemarker lamps receive voltage from the park lamp supply voltage circuit and illuminate. The sidemarker lamp is grounded through the corresponding rear turn signal. When the turn signal switch is place in the left or right hand position, the rear turn signal illuminates and the sidemarker lamp will loose its ground, causing the sidemarker lamp to turn off when the turn signals are on and to illuminate again when the turn signal is off.
Which blub an socket did you replace ? check the other blub ? The switch and or the flasher module can cause this problem .
Replace the turn signal switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column.
Did you complete the replacement?
Oct 11, 2015 | 2001 Pontiac Montana
Jun 16, 2014 | 2001 Lincoln Navigator
Jan 18, 2013 | Cars & Trucks
May 29, 2010 | 2001 Pontiac Aztek
Jan 01, 2010 | 2001 Volkswagen Jetta TDI
Dec 14, 2009 | 1998 GMC Sierra
Nov 10, 2009 | 2002 Ford F150 Regular Cab
Oct 27, 2009 | 2001 Ford F150 Styleside SuperCrew
May 09, 2009 | 1998 Buick Century
Feb 12, 2009 | 2001 Ford Explorer Sport
586 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: