Question about 1999 Ford Taurus
Check your tires as the correct inflation pressure and wear. Some garages will do it for free .Inspection of tires is the first thing to do .
Posted on Feb 02, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like you need your transfer case looked at and repaired.....that the only thing i can think of...hope it helps :)
Posted on Sep 30, 2008
HI, i would inspect the strut assembly for loose structure asap. i would also inspect the wheel knuckle and rotor and tie rod ends for loose fit as well. inspect thoroughly.
Its most likely the CV-joint assembly. the boot may have slipped off, allowing the joint assembly to dry up. i advise to inspect all the above before looking at the CV-half joint assembly and boot.
Posted on May 25, 2009
SOURCE: thumping noise in the front end
Rotate tires front to back and test drive if same thumping is felt then tires not the problem.
Next check out ball joints/ tie rods
Dont believe it is the rotors unless thumping happens only when applying brakes
Posted on Jun 03, 2009
Tips for a great answer:
Nov 07, 2015 | Cars & Trucks
Aug 26, 2013 | 2002 Mercury Mountaineer
Feb 10, 2012 | 2006 Dodge Charger
Sep 07, 2011 | 2004 Chevrolet Monte Carlo
Aug 19, 2009 | Pontiac Grand Am Cars & Trucks
Jan 13, 2009 | 2003 Lincoln Navigator
Sep 30, 2008 | 1994 Chevrolet S-10 Blazer
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: