Question about 2000 Toyota Celica

1 Answer

Idle up and down when Neutral

Have a 2000 Celica GT, cleaned the throttle body, but now the RPM is high, about 1500RPM, when coming to a stop, press cluth and put in neutral, the Idle RPM goes up and down. Any suggestions?????????

Posted by on

  • J Sherman Nov 14, 2011

    I cam across this post. I have a 2001 Celica GTS that seems to be acting very similar. Did you ever find out what the problem was?

  • Anonymous Mar 25, 2014

    i have replaced the a.i.c. n no change, is there anyway to adjust the idle? i also cleaned the throttle body as best i could. is there another sensor somewhere that i could b over looking?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Hi
The clutch perssure plates seems worne off. you will have to replace them .
You can start by adjusting the clutch setting ...drive for a few days and if still problem persists then go in for a pressure plate change..
Regards
Berry

Posted on Feb 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does 02 camry idle high when started?


It only revs up when u start the first in the morning? If so, it is normal, once it warm up it will back below 1000 rpm.

Jul 26, 2014 | 2002 Toyota Camry

1 Answer

Car won't pull back speed when foot off accelerator


Very possibly a vacuum issue. Maybe a line that needs vacuum for the trans is on an inlet that effects the throttle. Not sure how old your vehicle is.

Aug 23, 2012 | Jaguar Cars & Trucks

2 Answers

Shifting from drive to neutral rpm remains high


Take it to a qualified repair shop , Thinking ??? Also was thinking the MAF sensor or Intake Air sensor might be faulty . TESTING IS THE WAY TO A PROPER FIX !!!!!

Apr 04, 2017 | 2006 Saturn Vue

1 Answer

My car idles high like at 6 rpm n i dont even gotta hit the gas to get it to go n to get it to stop COMPLETELY i have to shovee it in neutral while its in motion, it wont stop idling high and i ride the...


Well all cars idle at 550 rpm to 700 rpm depends on engine but it sounds like you throttle body is not shutting down .
yes could be idle sensor or you could have a hose come off the intake manifold so bypassing the body valve, ,check throttle cable for free play when not going..check for hoses off /crackedand leaking air/or hose off the engine block either big or small ..

Sep 24, 2009 | 1991 Acura Legend

2 Answers

2003 ford focus rpm runs high when clutch is engaged


since this is a standard and you need to engage the clutch which basically shifts you into neutral to shift gears, this ALMOST sounds like the idle air control valve.

Aug 07, 2009 | 2003 Ford Focus

1 Answer

My 96 toyota celica 2.2 Liter will (5SFE0) will not idle down to where its supposed to be whenever i come to a stop. It stays at about 1700 rpm. I have to step on the gas to make come down to 750 rpm where...


Probably the "idle speed controller",(the ecu is programmed with target idling speeds values to respond to different engine conditions, coolant temp, a/c on/off etc,sensors transmit signals to the ecu which controls the flow of air through the bypass of the throttle valve and adjust idle speed top target value)
however this what the manual says,
check for defective throttle linkage or cable
check idle up-up vacum switching valve
check coolant temp sensor
check throttle position sensor.
Usually if its major, then the check engine light comes on,

Jul 09, 2009 | 1996 Toyota Celica

1 Answer

High idle 1997 Madza 626 4 cylinder auto transamission


Idle control valve...

HIGH DOLLAR PART, 400 to 500 smackers....

You can try cleaning it, I beleive that is the same 2.0 liter motor they put in the ford Probe? I could be wrong, I know they 2.0 has issues with the idle control valve..

Anyway, if you want to try cleaning it, try this link... its to a Probe, but should be the same as yours...

http://www.geocities.com/adamk01452/IAC_Clean.html

If its not the same as that, you can probably search the net and find a site specific to your car... but it really should be the same motor, even the haynes manual for the Probe has sections for both the Probe and 626 in it...

Good Luck!!!

Apr 22, 2009 | 2001 Mazda 626

1 Answer

Idle at 1500 to 2000 rpm


Most likely the throttle body gasket (between the throttle body and the intake manifold) is leaking.

Feb 10, 2009 | 2001 Chevrolet Cavalier

1 Answer

Idle too high on a 06 cobalt


when you clean it make sure that you hold the butterfly open so you can get the spots clean that need it. If there is anything in the way the butterfly will not close. Just a small bit of dirt will do this .

Dec 11, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
2000 Toyota Celica Logo

Related Topics:

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...