Question about 2001 Ford Escort ZX2

1 Answer

I need to put on the serpentine belt, I need a diagram for the tensioner

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

The guys an Advance Auto Parts can print it out for you. I'm not sure, but maybe, just maybe, you can get it online at Advanceautoparts.com

Posted on Feb 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

5.7l. Where can I get a serpentine belt (installation) diagram?


To get the diagram Google
Year Make model serpentine belt
And look at the images tab.

To release the tension lever it with a socket extension bar. Or you can put the belt on the tensioner and lever the belt onto a more accessible pulley.

Jan 31, 2016 | 1996 Chevrolet Caprice

1 Answer

Passat serpentine belt diagram v6


Here's a link to your belt,put wrench on bolt a tensioner,turn to take tension off,then remove belt,need 2 people to do this. 2000 Volkswagen Passat Serpentine Belt Routing and Timing Belt Diagrams

Sep 08, 2014 | Cars & Trucks

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    Replaced the Serpentine Belt, but cannot get power steering pump belt to go on pully, even after loosening bolt. Do I need a mechanic?


    the serpentine belt drive system has a tensioner pulley losing the bolt wont help you have to put to belt on as it shows on the diagram on the fan shroud while rotating the tensioner to loosen position hold pressure on it put the belt over all the pullies then on the tensioner once the belt is around all the pulley and the tensioner rotate the tensioner to tighten the belt...hope this helps

    May 12, 2011 | Dodge Caravan Cars & Trucks

    1 Answer

    I need to replace the serpentine belt on my car. How do I do that?


    These instructions will help you . and also the picture below will help you more.
    1
    Locate the belt-routing diagram, printed on the fan shroud or possibly applied to the underside of the hood. This diagram shows you how to properly route the new belt, as well as identifying the location of the various pulleys, including the serpentine belt tensioner.
    2
    Move the belt tensioner off the Sable's belt using the serpentine belt tool. The tool connects to the side of the tensioner's arm and essentially acts as a handle for use in moving the tensioner. You can purchase a serpentine belt tool at most auto-part retailers.
    3
    Slip the belt away from the tensioner with your free hand and release the pressure on the tensioner with the tool. Pull the belt off the rest of the pulleys by hand and then remove it from the engine well.
    4
    Grab the old belt and new belt with one hand and put your foot through the other end of the belts. Stretch them both to their full length and check to ensure their both the same size. The old belt may have up to one-inch of extra length due to normal stretching that occurs during the belt's service life.
    5
    Wind the new belt, rib side to the pulley, around the crankshaft pulley. Consult the routing diagram and route the belt to the next pulley on the diagram. Continue to route and then check the diagram until you have the belt wound around every pulley except the belt tensioner pulley.
    6
    Double check to make sure the belt routes exactly as shown on the diagram and then move the tensioner aside once more so you can route the belt over the tensioner pulley as shown in the diagram. Move the tensioner back into place slowly and remove the tool.

    Good luck

    tgv1501_23.jpg




    Jan 03, 2011 | 1996 Mercury Sable

    1 Answer

    How do I install the serpentine belt on a 2003 Ford expedition?


    Hello,Locate the serpentine belt tensioner on the front of the engine.The tensioner is what keeps tension on the belt and keeps the belt from coming off.The tensioner will have a bolt head in the middle of it that a 15mm socket will fit
    STEP 2:Look on the hood base where the hood lock attaches to the base and see if there is a belt diagram.This diagram will give you the exact instruction for properly routing the belt across the pulleys.If there is no diagram there,you will need to write down the exact routing of the belt on the pulleys on a notepad
    STEP 3:Put the 15mm socket onto the ratchet and put the ratchet onto the bolt head on the belt tensioner.
    STEP 4:Turn the tensioner clockwise to relieve the tension on the belt and remove the belt from all of the pulleys
    STEPS 5:Remove the new serpentine belt the same way that the old one came off by following the belt routing diagram instruction.Do not put the belt across the tensioner until last.Keep in mind that the belt will only go on one way and be right.
    STEP 6:Put the ratchet with the 15mm socket back on the belt tensioner and rotate the tensioner clockwise to give you enough room to slide the new belt across the belt tensioner pulley.Slide the belt onto the belt tensioner pulley and release the belt tensioner.Look over the belt and double check to make sure that the belt is running across all of the
    pulleys correctly
    STEP 7:Crank the car and inspect that the belt is secure and is staying in the grooves on all of the pulleys.

    Thanks




    .

    May 29, 2010 | 2003 Ford Expedition

    1 Answer

    How to change serpentine belt?


    Under the hood you will see a diagram that shows the routing of the belt, remember where that is you will need to refer to it! Now not knowing what engine you have I will attempt to help you, most engines with a serpentine belt have whats called and idler pulley this is a pulley that's only job is to put tension on the serpentine belt, it is sometimes identified in the diagram I spoke of earlier, if not look for a pulley that goes to nothing, in other words you'll see your power steering pump, your water pump. your a/c pump etc. once you identify it you need to put a wrench on it and pull or push it and you will see it relive tension on the belt and wa la you simply apply enough tension on it until the belt is loose enough to remove then you put the new belt on by lining it up on all the acesories and relieving the tension installing the belt and letting it loose so it can apply the tension! Use the diagram to make sure you have the belt on correctly. If you have any more questions just ask!

    Feb 12, 2010 | 1993 Jeep Grand Cherokee

    1 Answer

    Replacing a serpentine belt


    Don't have a chart, video, or diagram available at the moment. Can offer you generic advice.

    1.Somewhere in the middle of that serpentine belt, that is wrapped around all those pulleys, is an Idler tensioner Pulley. All this pulley does, is put tension on that serpentine belt. Usually located somewhere in the middle.

    The Idler tensioner Pulley will be on a bracket. It will be on the end of the bracket. The bracket usually has a 1/2 inch square hole in it. This is used for a tool, that resembles a 1/2 inch breaker bar.
    -> I, use a 1/2 inch breaker bar.
    The 1/2 inch breaker bar is inserted into this square hole, and the bracket is pulled to one side.
    This pulls the tensioner pulley away from the serpentine belt, allowing the belt to have slack, and then the belt is slipped off of one of those pulleys. Release the pressure slowly, remove the tool. Then the serpentine belt is removed all the way.

    (The Idler tensioner pulley bracket, can only be moved in one direction, to take pressure off of the serpentine belt. The direction opposite, of it putting pressure on the serpentine belt.

    The spring used to put pressure is Very strong. This is also an area, where you can easily slip, cutting your knuckles, or fingers, or hand, on sharp objects. Use caution, you may want to wear a glove, or gloves!)

    Then the new serpentine belt is wound around the pulleys in the correct pattern, the Idler Tensioner Pulley is once again pulled to the side, and the last of the serpentine belt is slid into place. Then you slowly release the tensioner pulley, and it puts pressure on the serpentine belt once more.

    Make sure the serpentine belt is in the grooves of the pulleys, and is wound around in the correct pattern.

    On the car hood inside, or on the radiator support, or perhaps on the inner fender well, or in the Owners Manual, it should show the correct pattern for installing the serpentine belt.

    Apr 24, 2009 | 1998 Cadillac DeVille

    5 Answers

    Serpentine belt replacement


    2.0L Engines
    See Figures 11, 12 and 13
    The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
    Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
    The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
    0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

    Jul 24, 2008 | 1999 Ford Escort

    Not finding what you are looking for?
    2001 Ford Escort ZX2 Logo

    54 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    fordexpert

    Level 3 Expert

    5546 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...