Question about 1990 Honda Accord

1 Answer

Automatic transmission control module replacement. where is it in the car? is it difficult to replace?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is on the floor pan on passenger side

easy fix

Posted on Mar 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 cts won't sift out of park, press the brake pedal and start the car, just won't shift out of park


You probably have a problem with

Automatic Transmission Shift Lock Control System
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components.
• The automatic transmission shift lock control solenoid
• The brake switch
• The rear integration module (RIM)
• The transmission control module (TCM) or powertrain control module (PCM)
With the ignition ON, battery positive voltage is supplied to the automatic transmission shift lock control solenoid from the ignition 3 relay. The automatic transmission shift lock control solenoid is controlled by the rear integration module. When the rear integration module (RIM) receives a class 2 serial data message from the transmission control module (TCM) or powertrain control module (PCM) indicating that the shift lever is in the PARK position the rear integration module (RIM) grounds the automatic transmission shift lock control solenoid control circuit. This causes the solenoid to energize mechanically locking the shift lever in the PARK position. When the driver presses the brake pedal the rear integration module receives the brake applied signal and turns off the ground to the automatic transmission shift lock control solenoid control circuit. This allows the shift lever to be moved out of the PARK position.

Shift Lever Does Not Move with Brake Pedal Depressed

2
Apply the parking brake and block the wheels.
Turn ON the ignition, with the engine OFF.
Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3
3
Turn OFF the ignition.
Install a scan tool.
Turn ON the ignition, with the engine OFF.
With a scan tool, observe the TCC brake switch parameter in the transmission data display list.
Press and release the brake pedal several times.
Does the TCC brake switch status turn ON and OFF with the brake pedal?
YES - Go to Step 4
NO - Go to Stop Lamps Inoperative in Lighting Systems
4
With a scan tool, observe the brake to shift control parameter in the rear integration module data list.
Press and release the brake pedal several times.
Does the brake to shift control status turn ON and OFF with the brake pedal?
YES - Go to Step 5
NO - Go to Step 8
5
Turn OFF the ignition.
Connect a test lamp between the automatic transmission shift lock control solenoid supply voltage circuit and the automatic transmission shift lock control solenoid control circuit at the automatic transmission shift lock control solenoid.
Turn ON the ignition, with the engine OFF.
With a scan tool, command the brake to shift control ON and OFF several times while observing the test lamp.
Does the test lamp turn ON and OFF with each command?
YES - Go to Step 7
NO - Go to Step 6
6
Test the automatic transmission shift lock control solenoid control circuit for and open or short to battery voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
YES - Go to Step 11
NO - Go to Step 8
7
Inspect for poor connection at the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
YES - Go to Step 11
NO - Go to Step 9
8
Inspect for poor connections at the harness connector of the rear integration module (RIM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Yes - Go to Step 11
NO - Go to Step 10
9
Replace the automatic transmission shift lock control solenoid. Refer to Automatic Transmission Shift Lock Actuator Replacement .
YES - Did you complete the replacement?
NO - Go to Step 11
--
10
Replace the RIM. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.
YES - Did you complete the replacement?
NO - Go to Step 11
--
11
Operate the system in order to verify the repair.
Did you find and correct the condition?
YES - System OK
NO - Go to Step 2

Mar 25, 2017 | Cadillac CTS Cars & Trucks

Tip

My car does not shift in second gear.


Hi.

The first thing to do is replacing the transmission fluid. Metal debris inside the transmission box gets mixed with fluid and can cause similar problems.

The automatic transmission uses throttle position sensor to determine position and opening of throttle.
IF throttle position sensor is defective, the car may have problems shifting into one or more gears.

The automatic transmission is controlled by an electronic control module, that is energizing a set of solenoids to shift into gears.
The control module is a rectangular box, often located behind the dash and wired to transmission. The solenoids are attached to valve body,inside transmission.

If a solenoid is defective, or if control module is defective, the car may have problems shifting into one or more gears.

Problems concerning transmission control module, TPS and transmission solenoid are usually detectable reading fault codes stored on the car main control module (ECU/ECM).

Transmission problems are often returning a code p0700 after an OBDII scan.

Stored codes can be retrieved using an OBD scan reader.
If the car auto transmission is not shifting into gear, talk to the mechanic about the problem.
Only when the car has a really high mileage, or when there is a factory problem there is need to replace the gearbox.
A damaged gear box at low mileage is rather unusual.

on Oct 23, 2009 | 1988 Jeep Cherokee

1 Answer

2004 pontiac sunfire wont shift out of park


Problem with shift interlock system .
Automatic Transmission Shift Lock Control Description and Operation
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
?€¢
The automatic transmission shift lock control solenoid


?€¢
The body control module (BCM)


?€¢
The powertrain control module (PCM)

With the ignition in the ON position, battery positive voltage is supplied to the automatic transmission shift lock control solenoid. The automatic transmission shift lock control solenoid receives a ground from the BCM. When the automatic transmission shift lock control solenoid is energized, the shift lever mechanically locked in the PARK position. When the driver presses the brake pedal the PCM sends a class 2 serial data message to the BCM. The BCM turns OFF the ground control circuit and this de-energizes the automatic transmission shift lock control solenoid. When the automatic transmission shift lock control solenoid is de-energized, the shift lever may be moved out of the PARK position. The BCM determines transaxle shift lever position through a class 2 serial data message from the PCM. The PCM receives inputs from the park/neutral position switch and determines shift lever position. When the BCM receives this information and determines that the shift lever is out of the PARK position, the automatic transmission shift lock control solenoid ground is opened.

1

Did you perform the A Diagnostic System Check - Automatic Transmission Shift Lock Control?
Go to Step 2
Go to Diagnostic System Check - Automatic Transmission Shift Lock Control

2

  1. Turn ON the ignition, with the engine OFF.
  2. Press and hold the brake pedal.
  3. Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3

3

  1. Turn OFF the ignition.
  2. Disconnect the automatic transmission shift lock control solenoid.
  3. Turn ON the ignition, with the engine OFF.
  4. Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
YES - Go to Step 4
NO - Go to Step 5

4

Test the A/T shift lock control circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
YES - Go to Step 9
NO - Go to Step 6

5

Inspect for poor connections at the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 9
Go to Step 7

6

Inspect for poor connections at the harness connector of the body control module (BCM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 9
Go to Step 8

7

Replace the automatic transmission shift lock control solenoid. Refer to Transmission Control Replacement in Automatic Transaxle-4T40-E/4T45-E.
Did you complete the replacement?
Go to Step 9
--

8

Replace the body control module (BCM). Refer to Body Control Module Replacement in Body Control System.
Did you complete the replacement?
Go to Step 9
--

9

Operate the system in order to verify the repair.
Did you find and correct the condition?
System OK
Go to Step 2

Jun 29, 2016 | Pontiac Cars & Trucks

1 Answer

How do I get shifter out of park?


The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
?€¢
The automatic transmission shift lock control solenoid


?€¢
The body control module (BCM)


?€¢
The powertrain control module (PCM)

The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock control solenoid:
?€¢
The ignition is in the ON position.


?€¢
The PCM sends a class 2 message to the BCM indicating the transmission is in the PARK position.


?€¢
The BCM determines the brake pedal is not applied according to the stop lamp switch.

When the ignition is in the ON position, the ignition 1 fuse supplies voltage to the automatic transmission shift lock control solenoid as the BCM supplies a ground to the control circuit, mechanically locking the shift lever in the PARK position as the solenoid energizes. When the brake pedal is applied, the BCM turns the ground of the control circuit OFF, de-energizing the shift lock control solenoid. The de-energized solenoid releases the mechanical lock allowing the driver to move the shift lever out of the PARK position. When the transmission is out of the PARK position, the shift lock control solenoid remains de-energized.
Your best bet is to take it to the dealer ,may have DTC'S
DTC B2707 Gearshift Unlock Circuit Low
The body control module (BCM) controls the automatic transmission shift lock control solenoid by providing a controlled ground to the automatic transmission shift lock control solenoid. The BCM utilizes a smart driver to monitor the voltage and current flow of the automatic transmission shift lock control solenoid control circuit. DTC B2707 will set when the BCM detects a short to ground when the solenoid is in the OFF state.
DTC B2708 Gearshift Unlock Circuit High
Did you perform the Diagnostic System Check - Vehicle?
Go to Step 2
Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

2

  1. Turn ON the ignition, with the engine OFF.
  2. Press and hold the brake pedal.
  3. Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3

3

  1. Turn OFF the ignition.
  2. Install a scan tool.
  3. Turn ON the ignition, with the engine OFF.
  4. Press and hold the brake pedal.
  5. With a scan tool, command the Brake to Shift Relay output control parameter On.
  6. Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
Go to Step 4
Go to Step 6

4

  1. With the scan tool, observe the Brake Switch parameter in the powertrain control module (PCM) data display list.
  2. Press and release the brake pedal several times while observing the scan tool.
Does the brake input display Applied and Released with the brake pedal operation?
Go to Step 5
Go to Diagnostic Starting Point - Lighting Systems in Lighting Systems

5

With the scan tool observe the TR Sw. parameter in the body control module (BCM) data list.
Does the scan tool indicate PARK position?
Go to Step 9
Go to Scan Tool Data List in Engine Controls - 3.4L

6

  1. Turn OFF the ignition.
  2. Disconnect the harness connector of the automatic transmission shift lock control solenoid.
  3. Turn ON the ignition, with the engine OFF.
  4. Press and hold the brake pedal.
  5. Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
Go to Step 7
Go to Step 8

7

Test the controlled ground circuit of the automatic transmission shift lock control solenoid for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 12
Go to Step 9

8

Inspect for poor connections as the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 12
Go to Step 10

9

Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 12
Go to Step 11

10

Replace the automatic transmission shift lock control solenoid. Refer to Shift Lock Control Solenoid Replacement .
Did you complete the replacement?
Go to Step 12
--

11

Replace the BCM. Refer to Control Module References in Computer/Integrating Systems for replacement, setup and programming.
Did you complete the replacement?
Go to Step 12
--

12

Operate the system in order to verify the repair.
Did you find and correct the condition?
System OK
Go to Step 3

Your best bet

Jan 11, 2016 | 2005 Chevrolet Equinox

1 Answer

What does diagnostic code PO0706 and PO700 mean?


OBD II Fault Code
  • OBD II P0706
Fault Code Definition
  • Transmission Range Sensor Circuit Range/Performance
The purpose of the automatic transmission is to match the engine's optimum power and torque characteristics to the driver's desired rate of acceleration and speed by auto-selecting different gear ratios or 'speeds' to power the wheels. The Transmission Range Sensor (also referred to as the PRNDL input and/or neutral safety switch) tells the transmission control module (TCM) and the powertrain control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved say from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle computer systems.

P0700
Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.

May 18, 2013 | 2000 Honda Civic

1 Answer

Transmission


Its the transmission control model. it is malfunctioning and it will need to be replaced.

This module initiates the shifting signal that is then carried out by the shift solenoids in the transmission case. replacing the module will fix the issue.

May 09, 2009 | 2001 Ford F350 Super Duty SuperCab

2 Answers

Automatic transmission not engaging on 1999 Subaru LEgacy.


your transmission could be getting weak or the module on the side of the transmission needs replaced

Feb 04, 2009 | 1999 Subaru Legacy

1 Answer

Transmission sometimes shifts hard into next gear.


Typiclly this is caused by a failing Pressure Control Solenoid. Now in some cases, since you are in the 1996 model year you may have a vacuum modulator that controls the shift firmness that can be replaced as it is externally mounted. I dont know how best to describe what it looks like, but look down on your transmission, on the front side facing the radiator and if you see a canister like device that has a vacuum line running to it, that is the vacuum modulator and you could start by replacing that and see if it helps.

If you do not have the vacuum modulator and have instead the electronically controlled version of your transmission then you will have a Pressure Control Solenoid and it, unfortunately, is located on the inside of the transmission and cannot be easily replaced without dropping the whole transmission.

The pressure control solenoid is a common issue with your transmission (4T65) and Im leaning more towards you have the electronically controlled version (4T65E).

Feb 02, 2009 | 1996 Buick Regal Olympic Gold

1 Answer

My 1999 Alfa 156 2.5 v6 has been giving me problems.A gear box light keeps coming on and the car will only drive at a slow speed and seems to be reduced in exceleration.


Check transmission fluid, eventually replace it. If fluid is OKit can be a problem with transmission control module, or if transmission is automatic with the TPS sensor.
In this case you will need to scan control module to find out the problem. This operation can be done at any qualified garage.

Sep 05, 2008 | Alfa Romeo 156 Cars & Trucks

Not finding what you are looking for?
1990 Honda Accord Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...