Question about 1994 Chevrolet S-10 Blazer

2 Answers

Turn signals aren't working but flashers are - 1994 Chevrolet S-10 Blazer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1997 s10 blaxer four door, four flashers work, turn signals don't replaced flasher 2 days ago, they worked, but now they stopped working again, any suggestions?

Posted on Apr 05, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,675 Answers

That is because they run off different systems, they both have thier own relays, normally the common fault with flashers not working is either, fuse, or relay (flasher repeter unit), if you turn your turn signals left or right can you hear a click click click noise? if not its your flasher unit, hope this helps

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals aren't working. Where do I replace the fuse?


first,, if the light comes on but doesn't flash, its not the fuse you need but the flasher unit, either way , the fuses are under the dash on the drivers side, by the left side of the dash,, the flasher unit is usually behind the fuse box , the flasher will fit 1996-2001 cars

Jul 21, 2011 | 1996 Saturn SL

1 Answer

Flasher relay continually clicks, even when the turn indicators aren't on. I replaced it today and the new one clicks too. On several occasions I have lost all all electrical power, sometimes briefly...


Sounds like you need to replace the 4-Way emergency flasher button because it is stuck causing your problem. Disconnect that flasher button and that should solve the problem. If it does replace it and your problem will be solved.

Jul 06, 2011 | 1996 GMC Sierra

1 Answer

I have a 1994 cutlass supreme and both the turn signals are flashing when they are engaged. We replaced the turn signal flasher underneath the dash, thinking that it might help and it did not. We also had...


Stop replacing things and turn off your hazard lights. If this doesn't fix you may have to replace your steering column turn signal switch. Youer hazard lights aren't working likely to a blown fuse.

Jun 16, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

It sounds like my signal lights are on when thry aren't! the clicking is driving me nuts. 1999 GMC jimmy SLT. Please help


This may be an issue with the flasher relay or the multifunction/turnsignal switch which should also include the hazard switch.Try wiggling the turn signal switch and or the hazard flasher button when this occurs to see if it will stop.If it does the issue is most likely in the switch.

Jun 14, 2011 | GMC Jimmy Cars & Trucks

1 Answer

Turn signals were working...but blinking fast. now they don't work at all...replaced fuse in side panel near door and still nothing. Everything else works..headlights, wipers, hazards..what gives?


you have a separate flasher for the turn signals.this is what your problem sounds like.if all your lights are working including the signal indicator on the dash then it will be the signal flasher.if you turn on the hazard flashers and locate it under the dash, this will show you what the turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal flashers again

Mar 08, 2011 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Turn Signals quit working


Sounds like the turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they use a different flasher.

May 05, 2010 | 2000 Audi TT

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...