Question about 2004 Ford F150

2 Answers

Stalls when I put it in gear or come to a stop runs fine otherwise

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,206 Answers

You need to change your idle motor (iac valve) this controls the air that engine needs to mix with the fuel to run.simple to do yourself,two screws and one 2 wire plug.

Posted on Feb 01, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There isn't a icv on that vechile, the electric throttle body is controled by the ecm at idle. the throttle maybe stiff or the stepper motor maybe gettin bad. best bet is to check that

Posted on Mar 10, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Running rough and stalls during wet weather otherwise runs fine.

Your ignition coil is cracked. Replace it with a new OEM unit.

Posted on Jan 12, 2009

  • 713 Answers

SOURCE: 1989 4 Cyl will run until hot, then stalls

could possibly be camshaft position sensor or crank shaft sensor have you had a diagnostic scan

Posted on Aug 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 88 grand am Se 2.0 OHC turbo, automatic the turbo does not work. my problem is that it runs great for about 1/2 hour driving until it gets warmed up. I come to a light it starts to surge and...


The TCC solenoid in the transmission needs to be replaced. It is under the side cover. It controls the converter to lock up for better fuel mileage. If you want to drive car until you get it fixed you can un-plug the connector going to the transmission on the front of transmission. This will keep it from going to lock up mode and keep it from stalling until you can fix it. Common problem.

Apr 02, 2011 | 1988 Pontiac Grand Am

2 Answers

Car runs fine when cold, when warm it stalls


My first guess is a vacuum leak or maybe a defective IAC. Tests need to be run to narrow the search down.

Apr 17, 2010 | 1990 Chevrolet Lumina

1 Answer

1989 4 Cyl will run until hot, then stalls


could possibly be camshaft position sensor or crank shaft sensor have you had a diagnostic scan

Aug 20, 2009 | 1993 Ford Probe

1 Answer

Runs great,put in gear stalls


You have some kind of sensor bad. Get it checked by a pro ; - )

Jul 17, 2009 | Dodge Durango Cars & Trucks

1 Answer

Car hesitates/stalls when engine is warm and car starts to move.


Sounds like a bad motor mount, pop the hood and see if the motor shakes or moves rapidly when u put it in gear holding down the brake.

May 10, 2009 | 2001 BMW 325

2 Answers

Stalls when put in gear


lock up solenoid in trans may be your problem

May 07, 2009 | 1990 Pontiac Grand Prix

1 Answer

1999 olds alero stalls when put in gear


Runs fine when not put in gear? Sounds like transmission is stuck in "lock-up". Need to go to transmission or full automotive shop for repair. This is not something you want to attempt on your own unless you are experienced with removing valve bodies and solenoids from the inside of transmissions.

Apr 29, 2009 | 1999 Oldsmobile Alero

1 Answer

Car stalls when stopping sometimes - starts ok then stalls


torque convertor not unlocking u can unplug the wiring 4 the torque convertor on the transmission u can drive it fine after u unplug it or spend $1000 to have it replaced ur call

Apr 05, 2009 | 1990 Oldsmobile Cutlass Calais

1 Answer

Engine stalls when put into gear, idle fines in park


This is a comon problem with GM cars.Most likely cause is the torqe converter clutch lock up solenoid.

Mar 04, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
2004 Ford F150 Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75235 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...