Question about 2002 Mitsubishi Lancer

1 Answer

How to remove and replacse 2002 mitsubishi lancers heatercord

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

Do you mean Heater Core???

Disconnect the negative battery terminal.

Disconnect the top and bottom hoses from the heater core next to the firewall)

Pull off the steering wheel
Undo the steering wheel bolt.
Undo the 3 screws holding the steering wheel cover in place, unclick them and put to the side.
Undo the centre console
Undo the glove box - you'll need to manipulate the stops on the inside and let it fall to the floor before - undo the two bolts at the bottom.
Remove the Instrument panel, radio, radio frame.
Undo the single screw in the bottom of the casing surrounding the vents control, gently pop out the vent plate.
Undo the 4 screws holding the vents controls in place.
Remove the frames that are holding the vent controls in place (either side of the centre colsoles (or where they were)
Remove the two side vents (push down and pull back).
Remove the two bolts (either side) that are holding the dash up.
Remove the two bolts (bottom left corner, bottom right corner) that are holding the dash up.
Gently pull the dash up and forward to (making sure you don't pull any wires off there guides and place to the side).

Put the dash to the side (resting on the front seat)

The heater core should be sitting in the middle of the dash.

Remove the four bolts (two top, two bottom) and place to the side.

Pull the heater core back and move to the side to clear the holes in the firewall.

Manipulate the heater core to the side and move out through the gap in the dash and the cross bar (it is a tight squeeze but you can get it out)

Installation is the reverse of all the instructions.

when you have finished installing the heater core make sure you bleed the engine with coolant

Top up the radiator - keep the cap off, turn on the engine, turn on the heater on the heater to full, with the engine running keep topping up the radiator as the water runs through the new core...keep doing this until no more water goes through - this last step takes a while so be patient otherwise you will start to drive the car and will have an overheating engine very quickly...

Posted on Feb 23, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the tourque of an input sensor of 2002 mitsubishi lancer?

All the Mitsubishi Lancers shared the same horsepower of 120 hp, including the 2002 model. -------------------------------------------------------------------------------
Motorola 711 Programmer

Mar 26, 2013 | 2002 Mitsubishi Lancer

3 Answers

2002 Mitsubishi Lancer won't run. No spark out of


Nov 04, 2009 | 2002 Mitsubishi Lancer

1 Answer

I hae a 2002 mitsubishi lancer I need wiring

Here is a link that should help you get the wiring colors you asked for. Good luck and hope this helps.

Oct 28, 2009 | 2002 Mitsubishi Lancer

1 Answer

2002 mitsubishi lancer es manual

eBay has these manuals available. Item # 270544305731
Sells for 6.99 to 7.99 + .99 for shipping.

This is the repair manual and is a CD for use with a PC.

They have owners manuals for some models too.

good luck

Oct 02, 2009 | 2002 Mitsubishi Lancer

1 Answer

How many oxygen sensors does a 2002 Mitsubishi Lancer?

4cylinder will have only two. A v6 will have at least 3 probably 4.

Aug 18, 2009 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides