Question about 2006 Dodge Magnum

Open Question

I have this code B1B8D on a Magnum 06 and I've already replaced the OCM , driver seat pos sensor and checked continuity on the wiring and all seems to be good . I'm wondering if I have to replace the ORC please help me thankxx ^_^'

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75814 Answers

SOURCE: Location of Crank Sensor

Front of the engine near the the timing chain cover, this is a picture. Make sure the connector is clean and free of corrosion.



300? 300: true ); MAX-HEIGHT: 400px; ; HEIGHT: expression(this.height > 400? 400: true )" src="http://info.rockauto.com/getimage/getimage.php?imagekey=1005895&imageurl=http%3A//www.standardbrand.com/web_app/catalog/images/PC127.jpg" />

Posted on Aug 30, 2008

  • 139 Answers

SOURCE: Loss of power, Codes p0300, p0302.p0308

check ignition coil pack with the truck running used
a spray bottle with water spray on coil pack if truck
stall you have a weak coil

Posted on Apr 20, 2009

  • 323 Answers

SOURCE: driver's airbag light on 2007 PT Cruiser convertable

The first code is for "driver seat track position sensor low". The module detects that the sensor input is less than or equal to 0.3 mA. The second code is referring to the first code. I have no idea what the third code is. Basically you have two different communication systems mixed. The 2001 uses the PCI bus system and the 2007 uses the CAN bus which is much faster. The first code is a CAN bus code and the second is a PCI code. As far as the airbag deploying in the event of a collision, I don't believe it will with an active code in the system. I hope this helps.

Posted on May 13, 2009

  • 1129 Answers

SOURCE: 2006 Dodge Magnum keeps overheating

Observe the car's engine as it runs for 10 minutes to ensure that the electric fan for the radiator is coming on, if not either the fan relay, fan's coolant temp. sensor, or the fan itself is bad, try the relay first it is the least expensive, if this is the type of vehicle that has no electric fan replace the clutch fan.

Posted on Jul 29, 2009

SOURCE: po748 can tcc solenoid or vehicle speed sensor cause this code

One question? Did you clear the codes out of the system with a scanner? I believe that's the only way to do it now,unlike the old days when you could rest by disconnecting the battery. Hope this helps.

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 214 CID circuit failure. Already replaced crankshaft pos sensor. Next it's either the camshaft pos sensor, PCM Relay, or the ECM.


You could also have some wiring problems or an ignition module that has went south too. First check your wiring harness for any signs of fraying, damage of any kind or corrosion. If that doesn't turn up anything, see about getting a module for it.

Apr 05, 2016 | 1995 Ford Escort

1 Answer

Suzuki forenza 2005 what is b1446 mean


short answer, Occupant controls failure. Passenger seat.

medium answer , air bags ,seat sensors and or seat belt systems failure.

Long answer.

no engine of the 5, are stated. nor country,



This is covered 100% in the book called FSM.

the factory service manual, on all cars. they have one

read it.? or at alldata.com and here

just $4 to read it.

https://suzukipitstopplus.com/



my best guess, is air bags (and ARE a danger to all mechanics that fail to read the FSM warnings, !!!)

the module is not communicating , due to power loss is the clue.

in case you dont know, error codes never tell you what part is bad

it at the least tells you what signal is dead, bad or a sensor not responding

what a tech,does, is do more test to ISOLATE the true cause.

others guess, and go broke fast $$$$$$



the Forenza is this Suzuki with Daewoo body and GM enigne,

are real pistol to work on,,,

rule 2, is the code is unique to suzuki, no other cars.

B1446 (i roll dice and guess)

2.0L engine, automatic.

out of FSM it states

but what does , OC mean,

its short, (not nice huh)

for

e Occupant Classification System (OCS)











Trouble Code: B1446 (2.0L L4 VIN - Auto)

OC Passenger Short to Power (Battery) or No Response








Trouble Code Conditions:

The OC sensor wiring is shorted to the battery wiring

Possible Causes:



  • Circuit


  • Sensor




OC rules before PLAYING around. a short excerpt.




If the vehicle is equipped with the Occupant Classification System (OCS), do not connect the battery negative cable before performing the OCS Verification Test using the scan tool and the appropriate diagnostic information. Personal injury or death may result if the system test is not performed properly.

Never replace both the Occupant Restraint Controller (ORC) and the Occupant Classification Module (OCM) at the same time. If both require replacement, replace one, then perform the Airbag System test before replacing the other.

Both the ORC and the OCM store Occupant Classification System (OCS) calibration data, which they transfer to one another when one of them is replaced. If both are replaced at the same time, an irreversible fault will be set in both modules and the OCS may malfunction and cause personal injury or death.

If equipped with OCS, the Seat Weight Sensor is a sensitive, calibrated unit and must be handled carefully. Do not drop or handle roughly. If dropped or damaged, replace with another sensor. Failure to do so may result in occupant injury or death.

If equipped with OCS, the front passenger seat must be handled carefully as well. When removing the seat, be careful when setting on floor not to drop. If dropped, the sensor may be inoperative, could result in occupant injury, or possibly death.

If equipped with OCS, when the passenger front seat is on the floor, no one should sit in the front passenger seat. This uneven force may damage the sensing ability of the seat weight sensors. If sat on and damaged, the sensor may be inoperative, could result in occupant injury, or possibly death.

Oct 20, 2014 | 2005 Suzuki Forenza

2 Answers

I have an '06 Jeep Liberty 4x4, and the ESP, ABS, Traction Control, Emergency Brake, and Tire Pressure lights are all on. My dashboard looks like the sky on the 4th of July. The lights were intermittent,...


How about a cracked or loose tone ring

The guy with the teeth, that the speed
sensor gets it's pulses from

I somehow don't think the dealer really did
much in the way of diagnosing things ,do you

Try a local shop with a good reputation for solving
touch problems

Aug 30, 2013 | Jeep Liberty Cars & Trucks

1 Answer

I have a 2000 hyundia elantra eng died while driving . had it towed home after a few hours of siting it started up a code did show up .crankshaft pos sensor and cylinder misfire. after a few days of...


Also have a 2000 Hyundai Elantra. Interesting same thing has gone wrong with mine within two months of yours. Get the crankshaft position sensor replaced. Maybe these just wear out in time. The car will start one day and the next day it will not. It was a puzzle until the check engine light came on this last time. I actually cheered because it meant the computer would register a problem. It cost $220 for parts and labor at the dealership. It's worth it or it will continue to leave you stranded at various times without warning. Since replaced I have noticed my car engine seems to be running better that I didn't notice was off before. Car has been fine so far.

Jun 08, 2010 | 2001 Hyundai Elantra

1 Answer

2004 dodge durango air bag light is on code B1BA6 and B223D


B223D OCM DTC PRESENT" ocm stand for occupant classification module, Both of these codes go together and show that the passenger seat sensor for the airbag needs to be recallibrated. This needs to be done by a dealership as they have the special set of calibrated weights and can run the tests to be sure it is done correctly. Call dealership to solve this problem.

Aug 26, 2009 | 1999 Dodge Durango

2 Answers

Driver's airbag light on 2007 PT Cruiser convertable


The first code is for "driver seat track position sensor low". The module detects that the sensor input is less than or equal to 0.3 mA. The second code is referring to the first code. I have no idea what the third code is. Basically you have two different communication systems mixed. The 2001 uses the PCI bus system and the 2007 uses the CAN bus which is much faster. The first code is a CAN bus code and the second is a PCI code. As far as the airbag deploying in the event of a collision, I don't believe it will with an active code in the system. I hope this helps.

May 13, 2009 | 2007 Chrysler PT Cruiser Touring Hatchback

2 Answers

My air bag light on my 2000 Ford Econoline van flashes a 19 code. Does anyone know what that means?


Seems to be a very common problem with Ford. The wiring harness beneath the drivers seat contains the sensors for the airbag system. Go under the drivers seat and secure all the wires and clips. This makes most error lights for the airbags go away. Hope this helps and good luck!

May 02, 2009 | 1996 Ford Aerostar Extended

1 Answer

Problem code 22, runs like ****


YOU NEED TO PULL THE CONNECTOR OFF THE ECM AND RUN A CONTINUITY TEST OF THE WIRES FROM THE TPS CONNECTOR TO THE ECM, THIS SOUNDS LIKE A POSSIABLE WIRING PROBLEM TO THE TPS

Nov 22, 2008 | 1993 Chevrolet S-10

Not finding what you are looking for?
2006 Dodge Magnum Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...