Question about 2002 Chevrolet Cavalier Coupe

2 Answers

How difficult to replace wiper fluid hose that has been damaged?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Way too easy, the hardest part would be getting to the outlet at the bottom of the washer fluid tank.

Posted on Feb 01, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Its easy just remove old pipe and install new pipe just be carefull not to break the plastic hose tails on washer motor regards

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 olds alero clog sprayer heads how to get them off


2004 Oldsmobile Alero Replace windshield wiper motor ...

www.fixya.com > ... > Oldsmobile > Alero > 2004 Oldsmobile Alero
Get solutions for 2004 Oldsmobile Alero replace windshield wiper motor ... The problem is often just a clog in the sprayer heads. ... ...windshield wiper fluid, I hear the pump's motor running but no fluid is ejected. remove the hose from the wiper .

Oct 16, 2015 | 2004 Oldsmobile Alero

3 Answers

WINDSHIELD WASHER NOT WORKING. HAS FLUID


Your hoses could be frozen if its cold where you are. Check the hoses for cracks. You might find fluid in your engine compartment if you have a broken hose. Listen to hear if the motor is pumping. There should be some sound either a click or a whiz sound when you push the washer button. If you hear no sound then check the wires on the pump. If they look good you probably need to replace the pump.

Sep 30, 2014 | 2006 Buick Lucerne

1 Answer

How to replace heater hose


2009-11-27_043351_98_chev_ven.gifHEATER CORE REPLACEMENT

TOOLS REQUIRED
J 38185 Hose Clamp Pliers

REMOVAL PROCEDURE

Drain the cooling system.
Remove the left wiper arm linkage nuts. Reposition the left wiper arm linkage for access.
Disconnect the vacuum hose from the brake booster and reposition.
Remove the air cleaner cover and intake tube.
Disconnect the throttle and cruise control cables from the TBI mounting bracket.
IMPORTANT: Disconnect the throttle and cruise control cables to prevent bending the cable housings.

Remove the transmission fluid filler tube.

Disconnect both of the heater hose clamps at the heater core using the J 38185.
Remove the heater hoses from the heater core.
Cap off the heater core pipes.
IMPORTANT: Cap off the heater core inlet and outlet pipes to prevent coolant spilling inside of the vehicle.

Remove the heater core cover.

Remove the heater core pipe retaining clamp screw.
Remove the heater core from the HVAC module.
INSTALLATION PROCEDURE

Install the heater core to the HVAC module.
Install the heater core pipe retaining clamp screw.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions\Vehicle Damage Warnings

Tighten
Tighten the screw to.1.6 N.M (14 lb in).

Install the heater core cover.

Install the heater hoses to the heater core.
Reposition the heater hose clamps to secure the hoses using the J 38185.
Install the transmission fluid filler tube.
Install the air cleaner cover and intake hose.
Connect the throttle and cruise control cables to the TBI mounting bracket.
Connect the vacuum hose to the brake booster.
Install the left wiper arm linkage.
Install the left wiper arm linkage nuts.
Tighten
Tighten the nuts to.5 N.M (44 lb in).
Fill the coolant.

Jun 26, 2014 | 2001 Chevrolet Venture

3 Answers

Mixed windshield washer fluid with red radiator anti-freeze will this harm?


It can do harm to seals (the alcohol in washer solvent) I'd flush cooling system and refill w/ new anti freeze.

Mar 02, 2011 | 2006 Chevrolet Impala

2 Answers

Only one winshied wiper spray works


Check the rubber hoses to the sprayers. If they are on the hood they can come unplugged when you open it. Have a friend work the sprayers as you watch for leaks. An old toothbrush can be used to clean spray nozzles by scrubbing over the hole.

Feb 13, 2011 | 2004 Chevrolet Cavalier

2 Answers

I am looking at a cls 550 2008 with 41k on it! I am concerned of what the next service cost will be and when it is do. I have heard horror stories.


Clean Forward Looking Camera Clean windshield behind the camera cover Inspect Battery Battery & auxiliary battery if applicable, check and correct fluid level; check battery condition using "Midtronics MCR 717" tester. Brake Fluid Brakes and Traction Control Check thickness of front/rear brake pads. Check condition/thickness of front/rear brake discs. Inspect lines and hoses for signs of chafing, leakage or damage. Cooling System Engine cooling system, antifreeze and corrosion protection. Check lines and hoses for signs of chafing or damage. Drive Belt Check condition of poly-V-Belt Drive/Propeller Shaft Inspect condition of flexible disks. Fluids Leakage - Major components. (Underside of vehicle and engine compartment) Check for chafe marks, line routing, damaged components. Hood Check catch, safety catch and hinges on engine hood for proper operation. Lighting and Horns Horn, high beam flasher, hazard warning flashers, turn signals, warning/indicator lamps, illumination, interior/exterior lighting, front/rear lamps. Check trunk/rear cargo area lighting, if applicable Parking Brake System Check parking brake [function test only] Power Steering Fluid Seat Belt Systems Check seat belts and buckles for signs of external damage and proper function. Steering Inspect play of tie rod and drag link joints, inspect rubber boots. Suspension Check condition of front axle ball joints and rubber boots. Suspension Fluid (Active Body Control (ABC)) Tires Check TIREFIT tire sealant expiration date; if equipped Inspect tires for damage and splits, measure tread depth. Correct tire inflation pressure, including spare if equipped. Washer Fluid Wiper Blade Wiper and Washer Systems Windshield wipers/washer system. Headlamp cleaning system and rear window wiper/washer system if applicable. Inspect/Adjust Headlamp Check and correct headlamp setting. Replace Air Filter Element Every 52,000 miles or 4 years. Cabin Air Filter (Combination filter) Every 26,000 miles or 2 years. Engine Oil Oil Filter, Engine Reset Service Reminder Indicators

thanks

Oct 21, 2010 | Mercedes-Benz CLS55 Cars & Trucks

3 Answers

No fluid from wiper


Either the pipework is blocked or the wiper motor is faulty.

Remove hose at window washer under the hood (Just one only), then switch on and water should be seen/ If not you need to gain access to the washer bottle and test / remove the pump and probably replace.

Dec 21, 2009 | 2006 Volkswagen Jetta

2 Answers

Windshield wiper fluid not coming out


remove the hose from the wiper arm and see if when you push the washer button that the fluid comes out the hose,if it does the sprayer nozzel is plugged if not replace the pupm

Dec 02, 2009 | 2001 Oldsmobile Alero

2 Answers

Windshield washer stopped working,wiper work fine,audi a4 cab


make sure you have plenty of washer fluid.if all is good.have some one turn on ignition and on turn on wipers washer motor. if you hear washer running look for kinked damage or disconnected hoses.also make nozzles not cloggeg up.if so you can use a pin or paper clip to un stop it.if you dont .hear no washer running check for electrical power.if yes replace washer.it not.check switch and wires.

Jul 25, 2009 | Audi Cabriolet Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...