Question about 1999 Chevrolet Silverado 1500

Open Question

How to replace a oil pump on a 1999 silverado

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

leetamara
  • 702 Answers

SOURCE: power steering - 1999 chevy silverado

You're going to have to bleed the system alot on those trucks. Just remove the return line and have an assistant turn the steering wheel back and forth just enough to engage the pump and filling the resevour while doing this. Keep bleeding until you have a good flow of P/S fluid out with no air bubbles. This can take a while.

Posted on Aug 24, 2008

  • 1118 Answers

SOURCE: Change Fuel Pump on 1999 Chev Silverado v8 2 wd automatic 2 door

you stand a better chance of removing the bolts that hold the bed to the frame and taillight plug and 2 guys can lift bed back about a foot, you can get right at it with out removing the lines.i would not want to remove the tank unless the gas is drained out. also disturb gas tank strapes tank might start leaking. save yourself alot of time and trouble and remove the bed. whatever way you do it good luck. OLD SCHOOL.

Posted on Jan 09, 2009

nicole99wu
  • 1049 Answers

SOURCE: how do i change the oil pump in my 1999 silverado

hi, my8, you can visit here.

Posted on Sep 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 silverado oil presure problem oil pump in front of engine


They may be right. Too much clearance on the bearings is where you lose oil pressure, or so I've heard. If you bought it used, someone may have once run old, dirty oil in it too long, or let it run low. You could drop the oil pan and check the bearings or replace them.

May 29, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

97 silverado 4x4...I changed the oil and filter and it wouldnt start after. I figered out it wasnt getting fuel and I don't here the fuel pump. All relays and fuses check out. Can it be anything else...


you need to check the oil sender unit at the rear of the engine if it does not close the ground to the fuel pump relay it may not start.aka either the sensor or no oil pressure

Mar 10, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Low pil pressure at idle, 20psi under power. I replaced the oil pump & placed a mechanical oil pressure gauge on the motor it selef


check your rod bearings and main bearings
did you prim the new oil pump? or the cam bearings could of gone out most of the time its the rod or mains

Jan 27, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

Is there a fuse for the fuel pump on a 1999 chevy silverado? i ran out of gas and now I cannot get it to start and I lost my manual.


there is a fuel pump relay under the hood under the black relay panel change that out sometimes they will burn out to save the pump from being fried.

Jan 01, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

Oil pump 1991 chevy blazer


oil pump bottom of engine inside oil pan

Dec 22, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

OIL PUMP


This Depends on a 2 Details, ENGINE Size 4by4 or NOT. Most are Fairly Simple Once the Oil Pan has been Removed and the OIL PAN is Normaly the HARDEST Part of it

AFTER OIL PAN REMOVAL
  1. Remove the oil pump. Refer to Oil Pump, Pump Screen and Deflector Removal.
  2. A loose screen or pipe assembly can result in an air leak and loss of oil pressure. For more information, refer to Oil Pump Clean and Inspect.
INSTALLATION PROCEDURE
.
  1. Install the oil pump and the oil deflector. Do not reuse the oil pump drive shaft retainer (4). During assembly, install a NEW oil pump driveshaft retainer. Refer to Oil Pump, Pump Screen and Deflector Installation.
  2. Install the engine oil pan. Refer to Oil Pan Replacement

Dec 09, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

I have a 1999 chevy silverado 5,3 i had the oil changed three weeks ago. now my light comes on tellin me to change my engine oil. what could cause this?


  • its a sensor that lets you know to change oil. 1st turn key on start possession don't start, 2nd pump gas pedal three times fast not real fast then after the third time turn key back to off then start the vehicle this should reset the light!!

Mar 31, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Changed oil pressure switch,still no oil pressure


The fuel pump on that model runs through the oil pressure switch so that if the truck looses oil pressure,It kills power to the fuel pump to prevent engine damage.you need to find the cause of the low oil pressure reading(possibly a bad oil switch).That would be the cheapest place to start,or have it checked with a mechanical gauge.Good luck,
ChevRev

Mar 30, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

422 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...