Question about 2003 Chevrolet S-10
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..
Posted on Mar 11, 2009
Most likely a bad connector on relay or the fuel sock needs to be replaced. if the sock is plugged it would cause the fuel pump to work hard and cause it to heat the relay and make it hot and removing it will cause it not to run. check the connectors to the relay see if they are opened up in the female socket if they are use a dental pick to close them up with. otherwise replace fuel pump and sock at that age with the alcohol in fuel it's killed the pump and sock.
Posted on Jun 13, 2009
SOURCE: 1994 S10 Blazer Fuel Issues?
YOU SHOULD INSTALL ORIGINAL GM PART AND NOT AFTER MARKET. I INSTALLED 2 AFTER MARKET PUMPS THEY WORKED FOR A WHILE THEN STOPPED. THE PROBLEM WAS NOT ENOUGH PRESSURE, SINCE I INSTALLED GM PART NO PROBLEM.......
Posted on Jun 27, 2009
That eliminates the crankshaft and camshaft position sensors. Have you checked the fuel injector itself for an open winding or stuck valve plunger? There should not be a steady 12 volts to the injector--if good injector, it would be spraying fuel steadily into the throttle body. But at least the engine should try to run if poorly. Take the injector out, dry it off with air, and intermittently apply 12 volts to one terminal while grounding the other. You should hear a click from inside every time you touch 12 volts. If not, replace it. If it does, it may be plugged with debris. Try blowing through it in reverse with compressed air.
Posted on Jul 17, 2009
SOURCE: fuel pump relay hot
You could have a loose connection going to the relay. Loose or bad connections cause amperage to rise causing heat to rise. Check the plug holes where the relay pins plug in. Check for blackened metal or melting plastic around the pins. If so, check under the relay box for burnt wires, etc. and repair.
Posted on Aug 07, 2009
Tips for a great answer:
Dec 10, 2015 | 1994 Chevrolet S-10
Sep 24, 2010 | 2003 Buick LeSabre
Aug 14, 2010 | 2000 Chevrolet S-10
Nov 18, 2009 | 1995 Chevrolet S-10 CA Edition
Jun 23, 2009 | 1994 Chevrolet S-10 Blazer
Feb 09, 2009 | 1993 Chevrolet S-10 Blazer
Jan 07, 2009 | 1996 Chevrolet Blazer
Aug 19, 2008 | 1987 Chevrolet R10
272 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: