Question about 1997 Chevrolet Lumina

1 Answer

Cannot start lumina after a serpitine belt shutdown and a near zero degree weather day. ( Serpitine tensioner replaced.) Were at the point where we have discovered that the fuel pump is not working and have removed the filter to reduce any back pressure on the fuel pump.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 303 Answers

Did the belt come off if it di it could have hitt the crank shaft sensor and broke it

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My serpitine belt keeps comeing off


The Crank Damper Pulley is worn out &
out of alignment & or tensioner pulley is weak

Nov 30, 2012 | 1992 Dodge Caravan

1 Answer

How To Put On Serpitine Belt For Alternator


place large ratchet on gray tensioner and pull it until tension releases from belt

Jul 15, 2012 | 1993 Plymouth Voyager

1 Answer

HOW TO REMOVE AND INSTALL SERPITINE BELT PULLYS ON A 1997 BMW 318i


Hi Robert:
I suggest visit this links with interesting information about this job:
- E36-Belt-Replacement/E36-Belt-Replacement

You have to find your belt tensioner, pop the cover off of it, hook a socket and ratchet to it and move it to release the tension off of the belt. While you are holding the belt tensioner, you can slip the belt off of one of the pulleys and then release the tensioner.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 17, 2012 | Cars & Trucks

1 Answer

HOW TO REMOVE AND INSTALL SERPITINE BELT PULLYS ON A 1997 BMW 318i


Hi there:
I suggest visit this links with interesting information about this job:
- E36-Belt-Replacement/E36-Belt-Replacement

You have to find your belt tensioner, pop the cover off of it, hook a socket and ratchet to it and move it to release the tension off of the belt. While you are holding the belt tensioner, you can slip the belt off of one of the pulleys and then release the tensioner.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 17, 2012 | Cars & Trucks

2 Answers

Tighten serpitine belt


if your belts loose it probably needs replacing.theres a tensioner pulley on those that automatically tighten as it stretches.unless your tensioner pulleyis getting weak which does happen

Nov 23, 2009 | 1993 Dodge Stealth

1 Answer

Serpitine belt routing?


if there is not a sticker under the hood, it will also have a diagram in the manual. to relieve the tension idler there is an indenttion in the front of the arm. you put a 3/8 rachet into the end and turn it to move the idler this is a spring belt tension. i have seen people pull tug and use screwdrivers trying to get them on. and never notice the rachet hole. flat to flat and groove to groove is basic, and should work. however a chevy blazer belt can be put on perfectly two different ways. but one way the belt will come out about 3/4inch too long.

Jul 11, 2009 | 2000 Lincoln LS

1 Answer

How do I get the tension off the serpitine belt to remove


on the bottom there is a tension pully u can adjust it from there

Jul 09, 2009 | 1997 Buick Skylark

1 Answer

Belts sqeeling on cold start up.


check your tensioner pulley and idler pulley by removing serpitine belt spin the pulleys inspect for roughness and endplay all so check harmonic vibration dampner pulley the one at crankshaft for seperation/endplay the rubber cracs and pulley walks on startup you could draw a metal file across the inner face of serpitine belt this will remove glazing or replace belt may be even better

Nov 30, 2008 | 2005 Pontiac GTO

1 Answer

How to change the serpitine belt


you most release the tension pully to take the belt off

Nov 15, 2008 | Jeep Cherokee Cars & Trucks

Not finding what you are looking for?
1997 Chevrolet Lumina Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...