Question about 2006 Subaru B9 Tribeca

2 Answers

Are there aftermarket wiper blades for the 2006 tribeca?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,098 Answers

Hi Im sure you can get them from ebay if you cannot find any get back to me and I will get you the supplier.

Regards

Dan

Posted on Feb 01, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Buy a bosh blades in your size ,Then slide out the rubber and slide it in the original wiper I did it and it work out perfekt. You will need a little screw driver to littlebid open these ports in the original wiper .

Posted on Feb 26, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 4340 Answers

SOURCE: Where can I get replacement wiper blades for a

it is the whole blade and wiper assembly that is changed, now days.. Not necessarily a bad thing, the little springs get tired, over time... Fast to replace..

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiper blades move real slow in the 1st & 2nd position


wiper blade on driver should be 22 inches and the passenger side wiper blade should be shorter make your wiper blades is what factory call for if too long they will move slow hang up.

May 23, 2013 | 2006 Opel Meriva 1.7

2 Answers

I just needa serpentine belt diagram for a 2006 subaru tribeca


Diagram reference number 1 in the image below:
7540040.gif"" Fitment: 2006 SUBARU B9 TRIBECA - 4 door

Application Notes:

Category: Electrical. Charging and Starting

SubCategory: Alternator / Generator and Related Components

Position: General

Part Number: 809221090


This is a Serpentine Belt that fits the 2006 SUBARU B9 TRIBECA - 4 door with the EZ30D engine. The Serpentine Belt is designed by SUBARU to be part of the Electrical. Charging and Starting-Alternator / Generator and Related Components. The Serpentine Belt has a position on the vehicle of General. The 2006 SUBARU B9 TRIBECA Serpentine Belt is a factory made SUBARU OEM part and it comes with a 12 month 12.000 mile warranty (parts only). Do not be fooled by an aftermarket SUBARU B9 TRIBECA Serpentine Belt! Buy a factory SUBARU part and receive peace of mind!
This factory part has a part number of 809221090. " clear1x1.gif dbox_border_left_bottom.gif clear1x1.gif dbox_border_right_bottom.gif clear1x1.gif

2_12_2013_10_59_21_pm.gif

Dec 14, 2012 | 2006 Subaru B9 Tribeca

1 Answer

I need to change wiper blades on 2006 trailblazer. i can't get the wipers off.


The 2006 Chevrolet Trailblazer has the most common hook-end wiper arms. Purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.

2006 Chevy Trailblazer Wiper Blade Installation Videos (hook end arms)

2006 Chevrolet Trailblazer Wiper Blade Size Options w/Correct Lengths & Attachments

Aug 16, 2011 | 2006 Chevrolet Trailblazer Ext

3 Answers

Where can I get replacement wiper blades for a 2006 subaru b9 tribeca?


it is the whole blade and wiper assembly that is changed, now days.. Not necessarily a bad thing, the little springs get tired, over time... Fast to replace..

Mar 07, 2010 | 2006 Subaru B9 Tribeca

1 Answer

Is the pin fixed in the subaru tribeca wiper arm or does it pop out


I think so i just talked to the dealer and they said you need to buy the subaru blades.... it's a total racket. I just bought two new bosch blades from napa and I have now way to put them on the tribeca. so now i have to return them and i'm going to buy a blade refill from subaru b/c the whole blades are 2x as much as the aftermarket replacements. If anybody knows of a way to get aftermarket blades on the tribeca please let me know!

Dec 25, 2009 | 2006 Subaru B9 Tribeca

1 Answer

How do I remove the wiper blade from the rear windshield wiper of a Subaru Tribeca


I went to the dealer and they showed me how to do it. Just pull it back, I thought it would break off----but it doesn't. Pull it back and it snaps right off.

Oct 28, 2009 | Subaru Tribeca Cars & Trucks

2 Answers

How do I remove front wiper blades to replace with new ones on my 2006 nissan quest


How to Replace Wiper Blades Guide:
Potential tools needed to replace wiper blades:
  • Flat blade screwdriver (small)
  • Small nosed pliers
  • Latex or vinyl gloves
  • Safety goggles
To replace wiper blades the actual action of replacing the blade is no big deal, it's the location of the blade down below the hood that can make it difficult though. Sometimes it helps to open the hood to gain access to the wiper blades. Other times it is helpful if the wiper blade is somewhere in the motion line of wiper action. The trick is to get the wiper to stop somewhere in the wiper arc. Turn the wipers to the on position and allow the wipers to start, and then shut the key off when the wiper has arrived in a desirable position on the windshield. To replace your wiper blades please follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
  • Step 1: With the hood closed, turn the wipers on, when the wipers are in the middle of their arc turn the key to the off position. (Note: if this can't be done because of wiper condition and you want to avoid scratching the windshield please open your hood to gain access)
  • Step 2: Locate the mounting clips at the top pivot on the wiper blade
  • Step 3: Release the clip and remove the wiper arm
  • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
  • Step 5: Reinstall the new wiper blade and recheck wiper operation

Common Problems:
  • Make sure the wiper blades are the same size as the original blades.
  • When replacing wiper blades not getting the blade on the mounting pin completely allowing the wiper arm to become dislodged and possibly causing damage to the windshield.
  • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
  • Wiper blade can create a chattering noise when the blade is not properly balanced allowing the blade to "flop" back and forth as the wiper direction changes.

I hope help you with this (remember rated this help) Good luck.

Sep 14, 2009 | 2006 Nissan Quest

1 Answer

Poor electrical


Same problems. I'm willing to bet that Subaru outsourced their light manufacturing to China, seeing as how the quality of the bulbs are so poor.

I bought a 2006 Tribeca in late 2007 with 27K miles on it. Have about 47K miles on it now and have changed out both sets of the headlight bulbs twice. At present the side puddle light is out and I also need to replace one rear brake light and 1 rear running light. I've kept my last two cars (Nissan & Ford) for no less than 5 years a piece but, I've never had, or heard of so many crappy light bulb issues.

On one occasion, both headlights went out at the same time while returning home from the grocery store at dusk. I stopped at an Advance Auto parts to get bulbs and fix it in the lot but, quickly found out it's going to take a lot more work vs. previous cars I've owned and/or worked on. Not very safe and considerate Subaru!

While I'm sharing, I also had another hazardous issue come up recently. While driving back to VA from MI, the wiper blades ceased keeping the windshield clean. It was snowing a bit and the roads were wet and dirty. I stopped at an Advance, and at a Meijers, and was advised that they only carry the rear wiper blades for 2006, and would have to go to a Subaru Dealer to get the blades. Again, not very safe and considerate thinking on the part of our friends at Subaru.

I like the car but simple maintenance matters are way too complicated and unsafe.

Sep 11, 2009 | 2006 Subaru B9 Tribeca

1 Answer

Change wiper blades


you are changing the blade not the arm oem connector dont need to be touch

Jul 01, 2009 | 2006 Jaguar XJ8

1 Answer

Windshield wiper blade on my MB E230 1996 makes noise


A better quality (aftermarket)blade fixed that problem on my E230

Dec 06, 2008 | 1996 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...