Question about 2001 BMW 5 Series

1 Answer

How do I pull out the upper radiator hose on a 2006 X5 3.0?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 437 Answers

Grab it real tight. wiggle and voila...it pops out.


remove fan blade nut. left handed 22mm nut also 1.25 open end american will get it.

must remove fan shroud with blade.

upper and lower hoses, airbox and sensor wires, coolant expansion tank, and anything else you can see in the way. must use a grabber tool when removing fan blade nut.

Posted on Feb 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace a radiator on a 2006 ford 500, need someone to show me how to take a radiator out


Drain radiator by removing lower radiator hose. REmove plastic cover panels on top of radiator. Remove upper radiator hose. Remove radiator fans. Disconnect transmission cooler lines. Remove radiator hold down bolts. Reverse to install.

Sep 25, 2017 | Ford Cars & Trucks

1 Answer

1998 crv radiator needs to be flushed, how do i do this?


Pull the lower hose off from the water pump, pull the upper hose off the goose neck at top, stick a garden hose in the bottom radiator hose end and seal it best you can with your hand or rags stuffed around it, turn the water on and leave water running for a while. Be sure to aim the upper radiator hose out from under the hood to keep water off the engine. After about 15 minutes or so, turn the water hose off and re-connect radiator hoses, refill the radiator and put the cap on. You've just backflushed your radiator.

Jul 13, 2017 | Cars & Trucks

1 Answer

How to change thermostat on a 2005 kia sedona


  1. Drain the coolant
  2. The thermostat is located at the end of the top radiator hose. Remove the drain plug from the radiator and flush the coolant into a pan.
  3. Remove the Upper radiator hose
  4. Loosen the clamps that connect the upper radiator hose to the housing and remove the hose.
  5. Remove the thermostat housing
  6. Loosen the thermostat housing mounting bolts. Remove the housing and pull the thermostat from it.
  7. Replace the thermostat
  8. Inspect the new thermostat and install it with a new gasket. Mount the housing and upper radiator hose. Then pour new coolant into the radiator.

Mar 18, 2017 | 2005 Kia Sedona

2 Answers

2006 pontiac grand prix gxp thermostat locacion


At the end of the hose that goes to the top of your radiator.

Sep 26, 2016 | 2006 Pontiac Grand Prix GXP

1 Answer

Fluid liking from hose coming from radiator


Check hose clamps if tight you might need a new upper radiator hose

Apr 03, 2013 | 2006 Dodge Magnum

2 Answers

Where is the thermostat for the 2006 Chevrolet Impala


It might be on the upper radiator hose from the Engine!

Drain the radiator before removing radiator hose. Then remove housing and you can find thermostat there!

In case of 3.5L,it is present at the end of lower radiator hose!

Cheers!!!

Nov 22, 2010 | Chevrolet Impala Cars & Trucks

2 Answers

Where is the thermostat located on a 2006 impala? Is there a diagram which shows its placement?


On your car I'm quite sure you open the hood and follow the upper radiator hose to a metal housing with 2 bolts on each side of the housing. Remove the upper radiator hose and anything else connected to the housing, remove the 2 bolts. The thermostat is located inside the housing.

Jan 10, 2010 | 2006 Chevrolet Impala

2 Answers

Where is the thermostat located


thermostat is located at the end of the lower radiator hose, not the upper like most vehicles. Remove the two bolts (most likely 10mm, you'll need a deep socket 10mm) then the housing. The thermostat is in the housing. remove and replace with a new one.

Dec 07, 2009 | 2006 Chevrolet Impala

1 Answer

2006 Monte Carlo with 3500 v6 /flex fuel engine


should be on the upper radiator hose where it mounts onto the motor, if you remove the hose from the engine side you may be able to see the thermostat inside the housing, should be 2 bolts that hold housing in place

Jun 14, 2009 | 2006 Chevrolet Monte Carlo

1 Answer

Trying to findout where the thermostat is located in a 2006 dodge stratus


= Partially drain cooling system below thermostat level.= Disconnect upper hoses at coolant outlet connector,upper hose,radiator <---->thermostat housing end
= Remove bolts attaching coolant outlet connector = Remove coolant outlet connector and thermostat.

Jun 03, 2009 | 2006 Dodge Stratus

Not finding what you are looking for?
2001 BMW 5 Series Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...