Depending on what year, you may have to replace the whole unite due to it being a sealed beam like a jeep. If not then you can just replace the bulb inside it from behind the unit. There will most-likely be a few screws holding the bulb in, make sure you DO NOT touch the glass part of the bulb on the new one due to it causing over heating and the bulb will have a extremely short life-span. The same process is taken with the sealed beam with a few changes. the screws may be on the outside or inside the hood, and don't worry about touching the glass, it does not matter obviously since it is constantly exposed to the environment.
297 views
Usually answered in minutes!
×