Question about 1990 Ford F350

1 Answer

When the lights are on the teal lights work when the lights are off the brake lights work when i step on the brakes with the lights on the driver side tail light and brake light go out........only the pasinger works properly

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 518 Answers

THIS SOUNDS LIKE YOU HAVE A BAD CONNECTION, TURN EVERYTHING OFF AND CLEAN CONNECTIONS AND CHECK FOR LOOSE WIRES

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

To clarify my post, driver side rear brake light does not work when braking. Need help


Easy, jus replace the bulb. No more than $20 and it should b an easy on n off wit little to no tools. But first have someone look at the lights or u and with the key in the on position engine off and lights on, does everything light up? If yes good. Then have have the person or yourself step on the brakes and if the passenger side brake light do light up and obviously not ur driver side then its and easy bulb replacement.

Jan 23, 2013 | 2007 Toyota Corolla

1 Answer

The shifter is locked and engine turns on but can not shift from park


1st, have someone step on brake pedal while you check to see if your brake lights are working, if yes proceed to step 2, if not check your brake light fuse(Left side of dash fuse#20- 10amp)IF fuse is good replace brake light switch on brake pedal. 2nd Step (brake lights ok) Turn key on engine off, press and release brake pedal several times slowly, listen for a click and and pulse on shifter handle. IF yes you have a shifter malfunction replace shifter assembly. IF no, inspect shift interlock solenoid and or relace solenoid and cable. You should see a small access cover about the size of a peanut around base faceplate of shifter assembly use small screwdriver and remove cover, use screw driver to press button underneath plate and release shifter into reverse and drive gears(this is manual overide) if you need to move vehicle in the meantime.

May 16, 2011 | 2005 Nissan Altima

2 Answers

2004 Volvo s60 awd t 'stuck in park'


Check your brake lights and see if they are working. The solenoid in the shifter is energized by you stepping on the brake. If your break lights do not work... your stuck in park. This can be caused by a bad brake light switch located above your brake pedal or.... a blown hazard / brake light fuse. Check them first.....

Kelly

Apr 17, 2011 | 1991 Volvo 240

1 Answer

My cars shift lock wont disengage so i have to use a screw driver to unlock and the brake lights dont work


Check your stop/brake light fuse. It's the same fuse that sends current to the shift lock, to unlock it when you step on the brake pedal. If the fuse is good, then have your brake switch, located above the brake pedal, checked.

Oct 07, 2010 | Chevrolet Aveo Cars & Trucks

1 Answer

Brake lights do not work. step on brake in park brake lights work. turn right signal on and step on brake left brake light comes on . turn on right signal and no brake lights work. put transmission in...


One of 2 things to have checked, if all your bulbs and connections are correct. 1-stop lamp switch module.
2-multifunction/combination switch (blinker arm/components that are in the steering column). For about a 1/2 hrs. labor cost, a mechanic should be able to test the circuits.

Apr 28, 2010 | 1997 Oldsmobile Cutlass

1 Answer

How to replace brake light switch?


How to Replace a Brake Light Switch
Parts:
1. Brake Light Switch

be4ae64.jpg

Tools:
1. Needle Nose Pliers
2. Flashlight
3. Combination Wrench Set

Steps:
Step 1 * Insert your key and turn the ignition switch to the ON position.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 * Turn your headlights on.
o Tip: Have an assistant check to make sure your tail lights are both working properly.

Step 3 * Step on your brake pedal and have an assistant check to see if the brake lights illuminate.

Step 4 * If all the brake lights are out, locate the brake light switch on the brake pedal linkage. Check for 12 volts into and out of the switch.
o Tip: Turn the key to the OFF position before starting any electrical work.

Step 5 * Disconnect the wiring harness from the brake pedal switch.

Step 6 * Disconnect the brake pedal switch from the brake pedal linkage.
o Tip: You may need to remove a c-clip to do so.

Step 7 * Remove the old brake pedal switch and replace it with a new part.

Step 8 * Reconnect the wiring harness to the brake pedal switch.

Step 9 * Repeat steps 1-3 to confirm that the repair has solved your problem.


Hope help with this (remember rated an comment this help) Good luck.

Mar 02, 2010 | 1993 Buick LeSabre

2 Answers

Brake Light doesn't work when headlights on


Have you tried replacing your brake light switch located under the dash on the brake pedal or it could be a short in the wire. You need a test light and unplug your brake light hornance from the bulb have someone step on the brake pedal touch the light to the hornance and see if your getting electrical current back there

Jul 30, 2009 | 2002 Jeep Grand Cherokee

1 Answer

No Brake Lights 1993 Chevy Astro Van


Check the ground wire & leads, if not try the multi-function switch in the column

May 29, 2009 | 1993 Chevrolet Astro

2 Answers

Brake light dont work


check the fuse for the brake lights. The brake lights and siganl lights use the same bulb filament. The parking and running lights use a dimmer filament in the bulb. There are 2 filaments.
Your brake lights work through the multifunction switch which operates the signal lights. If the signal lights work, you may have a bad brake lamp switch which is on your brake pedal arm.
Let us know what you find.

Mar 20, 2009 | 1998 Lincoln Town Car

Not finding what you are looking for?
1990 Ford F350 Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...