Question about Hyundai Motor 1998 Sonata

1 Answer

Ive got a hyundai coupe 2.0se auto and its doing 4000rpms in 55-60mph does this sound like is not hitting all the gears in the auto box ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

Yes it does. My 2.0 runs about 2300-2500 at 55. (this is a rough idea of rpm level dont shoot me if its off a little, since i try to pay more attention to the road than the gauges:) ) Can you feel the car when it shifts? Count the shifts if u can if not, Find somewhere safe to mess around and try to watch the tach and drive and watch for drops in rpms and count how many times it drops( accelerate a little harder than normal driving, but not so hard you run it all the way up to 6500 before it shifts.)
From first to 2nd would be one **** or rpm drop
2nd to 3rd would be two.
3rd to 4th would be three.

Sometimes a little Berkebile 2+2 gum cutter sprayed down the tranny fill tube will loosen up a sticking valve (about 15-20 seconds worth of spraying) then drive it at least 30 miles or 50 km's.

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 Hyundai Tiburon has a small grind shifting from neutral to third. Just wanted to know if there's a quick fix or I gotta rebuild the transmission or place it all together? This problem started while...


If you are changing going up hill you will be going from 4th back to third. There is a synchro operation for this operation and if you get a grating sound as if the gears are not meshing properly on engagement there are things that you can do .
check the condition and grade of the oil in the gear box. check for metal on the drain plug magnet.
If the problem is in the synchro system then the gear box will have to come and have a synchro kit fitted along with new bearings
A rebuild will be cheaper than another box

Dec 19, 2014 | Cars & Trucks

1 Answer

Gear selecting issue on Hyundai Coupe with 3rd gear


have you checked the transmission fluid...does it smell ``heated``,
is the fluid red or dirty?

Mar 31, 2014 | 2006 Hyundai Coupe 2.0

1 Answer

Hyundai coupe central locking problem


it may be a control module issue as well which is also a dealer item..unless a parts store can do it cheaper..(I would honestly go with the dealer tho)

Dec 22, 2013 | Cars & Trucks

1 Answer

Hyundai 1,6 coupe 1998 r reg no 5th or reverse gears


Sounds like a failed synchronizer in the transmission itself. You are looking at rebuilding the transmission, or finding a good used one to swap in.

Jun 06, 2012 | Hyundai Cars & Trucks

1 Answer

Oil leak from driveshaft n/s


not sure if you can interchange the manual & aut shafts, but you should check to see if there is excessive play where the shaft enters the gear box if so the diff bearings my be worn, if there is no play or noises from gear box when driving, remove the shaft again an try the seal on the shaft to check it's a proper fit, before fitting seals it is a good idea to leave them soaking in oil for a few hours prior to fitting

hope this helps

Regards

Jim

May 29, 2010 | Hyundai Motor S Cars & Trucks

1 Answer

My 2003 Sante Fe is sluggish when taking off into 1st gear and also when switching into 2nd & 3rd. You really have to rev the engine to switch gears, pretty much up to 4000rpms. Once in 5th gear, you...


IF NO FAULT CODES CAME UP ITS NOT A ELECTRICAL FAULT.IT SOUNDS LIKE A RESTRICTION OF AIR. CHECK YOUR DUCTING PIPES AND ALSO THE BUTTERFLY ON THE TROTTLE BODY.CHECK AIR FILTER FOR DIRT OR WATER

Jul 08, 2009 | 2003 Hyundai Santa Fe

3 Answers

2001 Hyundai Accent high rpms on highway


you need to make sure your trans is shifting to high gear. if not thats why your rpm's are to high.

Jun 11, 2009 | 2001 Hyundai Accent

1 Answer

Hyundai Coupe gearbox ( not car in product)


hi there! i was a master tech 4 hyundai, first of all has the atf fluid been changed and at the correct level. or have you had the multifuntion switch checked? please feel free to contact myself and i will advise you as required with my exsperience

many thanks

Dominic Hill

Dec 09, 2008 | 1998 Hyundai Elantra

1 Answer

Auto gearbox 1998 Hyundai 2000cc


Probably needs a gearbox rebuild. Take it to a specialist or you may waste a lot of money using odd job mechanics.

Apr 27, 2017 | 2000 Hyundai Elantra

Not finding what you are looking for?
Hyundai Motor 1998 Sonata Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...