Question about 2006 Ford F-150

2 Answers

How to replace burnt bulb in map light,how do I get the bulb out without breaking the lense? its a 2006 F-150,I dont have an owners manual.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 984 Answers

For the over head console, non rail type :
Open the rear door, and grab each corner and pull down.
There are 4 or 6 spring clips holding the overhead console to the roof panel.

Once you have it down, you will see the gray bulb holders on the back, these are 1/4 turn bulb holders installed from the back.

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Posted on Feb 01, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 108 Answers

Just pry off the lense using small screw driver with extra care

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights dont work or other lights are ok i change the break light switch i change all fuse but still some 10 dont work what can i do


Make sure you have the switch adjusted properly....If you remove the switch without unplugging it
the brake lights should come on....You have to have the brake light switch button placed in perfect position so when you mash pedal the switch button will release from switch causing the lights to come on.......Be sure the bulbs are not burnt out.....just for a test turn switch on and remove switch from pedal area without unplugging it to check for brake lights........If they are not on check bulbs..........

Mar 07, 2011 | 2001 Ford Focus

2 Answers

One of my front dome light is out. how do i replace the bulb? Thank you, Don


YOU HAVE TO PRY LENS OFF TO ACCESS THE LIGHT BULB.BECAREFUL DONT CRACK LENS RETAINER WHEN YOU PRY IT OFF TO REMOVE LENS.

Oct 02, 2010 | 2006 Honda Accord

2 Answers

2006 Tiburon Map Light Conversion to LED Help


Your really messed up
First ,get an owners manual,if you don't have one already
Then always look up what the bulb or lamp # is,BEFORE you buy them. Looking up fuses and bulbs,is the main reason you ,absolutely need the owners manual.
You also need one, so all these silly people,stop asking what the check lights are for.

May 26, 2010 | 2006 Hyundai Tiburon

1 Answer

How do you replace a map light bulb in a 2006 honda pilot


take a small screw driver and place it between the white lense and caseing carefully pry the lens of there should be eather 2 or 4 prongs holding it in place ounce the lense is off pull the bulb out (just pull) then install new bulb replace lense and you are done good luck cj

May 14, 2010 | 2006 Honda Pilot

1 Answer

2007 Chrysler TOWN AND COUNTRY.. OVRHEAD MAP


I had the same problem on my 07 and it turned out to be caused by the bulbs getting too hot and melting the surrounding plastic which opened the circuit powering them. I was able to fix the problem by removing the bulbs and cleaning the sockets allowing the bulbs to seat correctly. The lenses snap off to give you access to the bulbs. If you are not familiar with how interiors of cars come apart, I would not suggest doing it as you may crack the lens.

Sep 29, 2009 | 2007 Chrysler Town & Country LX New Cars

1 Answer

1993 geo storm no brake lights...


Locate fuse panels. Typically under dash, side foot well or under hood. Covers usually have fuse labels. Obtain repair manual.

Jul 10, 2009 | 1993 Geo Storm

1 Answer

I don't have any tail lights brake lights, and turn signals. i dont know what fuse or relay to check or replace, because I dont have a owners manual to cross reference. Oh my vehicle is a 1997 ford...


CHECK ALL LIGHT BULBS IN THE BACK. PROBABLY HAVE A FEW BAD BULBS THAT ARE BURNT OUT COMPLETELY. CHECK LICENSE PLATE LIGHTS ALSO. CHECK FUSES TOO TO MAKE SURE THE TAIL LIGHT FUSE IS GOOD.

Jun 10, 2009 | 1997 Ford Expedition

1 Answer

HOW CAN I CHANGE THE BULBS FOR THE MAP LIGHTS AND THE CIGAR ASH RECEIVER WITHOUT BREAKING ANYTHING.


To change the bulbs for the map lights you need to first remove the screw located on the overhead console which is towards the front of the console (towards the front window). Then you need to pry down on the rear of the console. Once the console is removed you then need to remove the map light bulbholders and replace the bulbs.

As for the bulbs for the ashtray I am not sure if there is one.

Apr 02, 2009 | 2000 Dodge Intrepid

1 Answer

My light bulb is burnt out...and I dont know how to get to it


It's called a position light, do you have owners manual, it shows how to replace the bulb under lights, but you don't , all you do is, raise hood, depending on which side you are at it, top left/right there are no wires going to the bulb from backside they are built in headlight housing, it will be a flat tab stick out, 1/2" by 1/2", you need a pair of needle nose pliers to grab it, turn counterclockwise, and pull socket out, takes a w5w GE bulb

Sep 11, 2008 | 2007 Kia Rio 5 Sx M/T Hatchback

Not finding what you are looking for?
2006 Ford F-150 Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...