Question about 2005 Dodge Durango

1 Answer

Need to locate EGR valve on dodge durango 2005

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 14,036 Answers

EGR VALVE LOCATED ON THE INTAKE.IT HAS A SMALL ROUND LOOKINGIT HAS A METAL FLEXIBLE PIPE THAT CONNECTS TO THE EXHAUST MANIFOLD.

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is egr valve located on 99 dodge durango 5.9l magnum v8 slt plus? Or does it not have one


Hi, I was unable to locate an EGR valve in any engine diagrams I ran across for your engine. However, if you know what an EGR valve looks like then trace all lines, tubing from your intake manifold. Sometimes they can be located at the back of an engine but more than likely they are at the front or the side of the engine usually with only one electrical connector and two screws that mount the EGR valve to an exhaust tube.

Oct 22, 2017 | 1999 Dodge Durango

1 Answer

Where is the egr sensor located on 05 durango


The egr sensor is built onto and is part of the egr valve. Depending on what engine you have depends on where the valve is located. On 5.7 engines its in the front. On 3.7 and 4.7 its in the rear of the engine.

Apr 30, 2011 | 2005 Dodge Durango

1 Answer

How to replace the egr valve on a 2005 dodge durango 5.7 hemi


Dont bother just make a seal off gasket from a coca cola can ,it will run better without the EGR valve and still pass the emmisions test with it blocked off

Apr 25, 2011 | 2005 Dodge Durango

1 Answer

How do I install an EGR valve for 2005 dodge durango?


To install the EGR Valve on a 2005 Durango first it is necessary to remove the air intake hoses and palce them to the side. Next, in order to get the EGR valve you will need to remove the windshield wiper motor, which is a pain but necessary to do get to the EGR valve. After removing all of the itemsthat are in the way you will be faced with a task that will try your patience, the EGR valve is located on the right side of the motor, (as if you were facing the motor from the front) just behind and to the rear of the throttle body. After you locate it you will need a rachet with a flexible head because it is fairly difficult to reach otherwise. A mirror and light will also help so you can see what you are doing since the EGR valve is located in such a hard place to see and get to that you will only be able to see part of it while you are removing the screws. After removing the EGR valve, simply reversethe procedure and your done. P.S. I own a 2005 Dodge Durango SLT with a 4.7L engine and I replaced mine this year after a check engine light came on and I checked the code on the OBD. By the way the EGR valve is a pain in the rear to change. Good luck!

Jun 29, 2010 | 2005 Dodge Durango

1 Answer

EGR Valve 2005 Dodge Durango


Check in the drivers side rear of engine take off the air housing and use 13mm. deep socket w / 3inch ext. and air ratchet to remove 2 bolts, then take tire off inner splash panel then 8mm wobble w / 24inch ext to take 1 tube bolts loosen other one and pull out as ***. Reverse to install.

Hope this help to solve it (remember rated this post).


May 20, 2010 | 2005 Dodge Ram 1500

1 Answer

05 Dodge caravan P0406 code


It is most likely that your egr needs to be replaced

Jan 10, 2010 | 2005 Dodge Durango

2 Answers

Egr valve dodge durango


if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the egr valve, remove the egr bolts, disconnect wiring, remove valve and tube together, attach intake tube loosely to new valve, install new valve, tighten tube bolts to egr using a swivel socket, this is not a 5 minute job, so dont attempt unless you have some time and patience.

Apr 17, 2009 | Dodge Durango Cars & Trucks

1 Answer

Location of EGR valve on 2005 Dodge Durango


If I had been him, I would have talked you into a Chilton or Haynes manual for your car. They are easily detailed enough to show you the location and  Iwould be surprised if a chain operation like AZ didn't have the right one on hand.

Dec 10, 2008 | 2005 Dodge Durango

Not finding what you are looking for?
2005 Dodge Durango Logo

Related Topics:

687 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...