Question about 2007 GMC Yukon Denali

1 Answer

I got a new keyless remote for my 2007 Denali and I need to know how to program it.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

What is the Make, model, name, serial number, and any other information that came with the kit? It usually consists of some bizarre act that you have to perform. example: to synchronize a on board compass inside a vehicle, you have to drive around in a circle.

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I make my AC work when I turn on my YUKON DENALI 2007 with a remote?


If the control is set for ac when you turn the engine off, it should come back on when you start it by remote. Is the radio and other accessories working when you use the remote ? Could be the remote system is not powering the accessory circuit for some reason.

Jul 27, 2012 | 2007 GMC Yukon XL Denali

2 Answers

How do i unlock my 2007 lexus if both keyless remotes arent working?


Use the key itself? Perhaps I'm not understanding the question.

This post has some solution for getting your keyless remotes working again: http://www.clublexus.com/forums/ls400/438728-remote-keyless-locking-system-not-working-anymore.html

Feb 11, 2012 | 2007 Lexus ES 350

1 Answer

How to program keyless entry remote for buick lacrosse?


I own a 2007 Buick Lacrosse, but I imported it to Paraguay, South America. Now I bought a new Engine Start Keyless Entry Remote from Amazon, but here we do not have any GM dealer to program the unit.
I really need help to program the keyless remote control, I will appreciate very much your help.

Jan 02, 2012 | 2005 Buick LaCrosse

1 Answer

Yes i have a 2007 gmc yukon denali. when i bought it they didnt give me the keyless entry pad with remote start, then when they did give me one it wasnt the one for my vehicle, they told me all i had to do...


Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the DOOR unlock switch.
While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds , the doors will lock and unlock to confirm the programming of that transmitter.
Repeat the previous step to program up to four transmitters.
Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
Operate the transmitter functions in order to verify correct system operation

Feb 11, 2011 | 2007 GMC Yukon Denali

1 Answer

2007 gmc yukon denali wont unlock w/ keyfob


Check the buttons.. I have an 06 Grand Prix with the Remote starter on the top and it seems that the conductor on the buttons worn out.. Take the keyfob apart, pull the rubber buttons off the chip, lick your finger and touch the place where the unlock (right side of the fob) would be. That should unlock your doors. I just did it with mine. I would just buy another fob on ebay and change the buttons out.. Hope this works

Apr 23, 2010 | 2007 GMC Yukon Denali

1 Answer

How to program a keyless entry fob for 2005 gmc envoy - i am replacing the battery in my key fob every 5 days. I have to be right next to the car for it to work. Any idea what would cause this. I ordered a...


Seating in the drivers seat , make sure all doors are closed.Insert key into ignition, don't turn on yet.
Wait for the dome light to go out, then press and hold the door unlock button , make sure it is UNLOCK, while turning the key ON OFF ON OFF Twice , do not engage the started, just on to the point of being on. Release the unlock button,and your doors should lock, then unlock indicating programming mode.At this point hold down both the lock and unlock button on the key fob. After 30 seconds your locks should lock and unlock, indicating the fob is programmed. This must be repeated for all remotes, whether or not it be new or old. After all remotes are programmed, turn the key off and on again to exit programming mode.

May 18, 2009 | 2005 GMC Envoy

1 Answer

Keyless remote Problem for Yukon Denali 2005


Have your dealership test the remotes for you, they will also use a "Tech-2" to re-program it and should not charge you to do so. "I know mine does not" The "puddle" lamps come on when you un-lock the doors with the remote."If they are enabled in the options on your dash information center or "DIC". "See owners manual for info on that". As far as the DRL's make sure your bulbs are good because they are known to blow out. But the remote should not have anything to do with those.Hope that helps a little?

May 05, 2009 | 2007 GMC Yukon XL Denali

2 Answers

Remote Keyless Entry fob for my 2007 Suzuki XL7


Not 100% sure about Suzukis but on my ford the same happened to me and I had to program them at the same time. Hopefully this helps.

Jan 19, 2009 | 2007 Suzuki XL-7

Not finding what you are looking for?
2007 GMC Yukon Denali Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...