Question about 2006 Ford Crown Victoria

1 Answer

The car hesitates like it is going to stop the engine. I noticed that the RPM was at 2000 and it dropped down to almost 0. Check light along with wrench light came on. Wrench light went out check light still on.

Posted by on

  • Lamberto Mendoza May 11, 2010

    Does this problem exist right after you start the engine?If you apply a little gas does the runs smoothly?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Wrench light, is "Service Engine Soon". Check light indicates there is a stored and current engine computer fault. Often referred to as a DTC,,,Detected Trouble Code. Stop by your Autozone or Advance Auto parts store and they can plug in a scanner that will tell what faults occured and possibly what you can do to take care of the problem,

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I start my 1996 Honda accord the engine seems to sputter rpm gauge revs up on its own and spits and sputters as I'm driving down the road


My sputtering & stalling 1993 Honda Accord - YouTube

? 2:12
https://www.youtube.com/watch?v=Ki2H9aq8Xis
Jun 23, 2011 - Uploaded by mdpbfly
My sputtering & stalling 1993 Honda Accord ... 1996 Acura Integra, hesitation accelerating & misfire. ... 1993 Honda Accord Start Up and Review 2.2 L 4-Cylinder ... SIR B16A Engine sputter/ power loss at higher RPM - Duration: 1:14. by ... 1994 Honda Civic Check Engine Light Code Retrieval Tutorial ...

All comments on How To Solve Honda Idle Problems ...

https://www.youtube.com/all_comments?v=L788jKEVblY
What should I do if once I turn on my Ac my idle drops as if it's gonna die, and .... to a complete stop the rpms start going up and the car accelerates on its own. ... Honda Accord LX, and my Honda just started sputtering in idle. check engine .... My cousin replaced my radiator on my 90 civic and since then my temp gauge is ...

Acceleration Bog/Sputter/Hesitation - Honda-Tech

honda-tech.com/honda-accord.../acceleration-bog-sputter-hesitation-279...
Jun 11, 2010 - 1990 Honda Accord Ex F22 209000 miles, recent alternator change When I ... When I take off from a stoplight I get a little hesitation/bogging/sputteringfeeling until about 2,000 RPM then ... My 1999 Accord had a similar problem (F18B2engine). ... It only lasted a second or so before it would actually rev up.


Dec 28, 2015 | Honda Cars & Trucks

1 Answer

2002 Lincoln LSE 3.9L 124,000 MI. stalls after a stop or hard braking.


Hi.
This may be a "sticky injector"

This would cause overfuelling - and a sudden rise in RPM. The ECU will see this and compensate - by shutting the injectors down lower - , which then stalls the vehicle.

Worth a try runnig cleaner through them.

Jul 10, 2008 | 2002 Lincoln LS

1 Answer

2005 Dodge Neon Oil Pressure light flickers at 1000 RPM or lower


check oil pressure switch located on side of engine block. not sure what side on a neon.

Nov 16, 2012 | Dodge Cars & Trucks

1 Answer

The car hesitates when idling or stopped at light/ stop sign, and the rpm drops to zero then goes back up.


The battery was a red herring - it would not have anything to do with the problem.
Faulty spark plugs could cause a miss but probably not make the engine stall.
What you described is a classic example of a faulty idle air control valve or a dirty throttle body. The computer controls idle speed by regulating how much air enters the intake. It opens the control valve to raise idle speed when necessary.
I would check the control valve and the throttle body.

Sep 27, 2012 | 2003 Nissan Altima

1 Answer

Engine is sputtering when I stop and the idling is below 1000 rpm.


SOUNDS LIKE A VACUM LEAK OR A HOLE IN YOU AIR INDUCTION TUBE ( BIG BLACK FLEX PIPE) BETWEEN MASS AIR FLOW SENSOR AND MOTOR

Dec 09, 2011 | 1995 Toyota Camry

1 Answer

2000 nissan xterra hesitating when engine is warm


We are having the same problem. We are right now changing the crankshaft position sensor along with the intake and manifold gaskets.

May 09, 2009 | 2000 Nissan Xterra

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

728 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5677 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...