Question about 1998 Dodge Stratus

1 Answer

I need a diagram to find my aluternator in my 1998 dodge strstus please.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

2.0L DOHC Engine
See Figure 4

  1. Disconnect the negative battery cable.
  2. Disconnect the starter motor electrical connections.
  3. Remove the starter motor mounting bolts and remove the starter.


I need a diagram to find my aluternator - cb88b61.jpg Fig. Fig. 4: Exploded view of the starter motor mounting-2.0L engine
To install:
  1. Clean both surfaces of the starter motor flange and the rear plate. This is important since the starter grounds through its case and the transaxle flange to which it attached. Some remanufactured starters may have paint on these areas which should be cleaned off before installation. Install the starter motor onto the transaxle and secure with the retaining bolts. Tighten the bolts to 40 ft. lbs. (54 Nm).
  2. Attach the electrical harness connectors to the starter.
  3. Connect the negative battery cable and check the starter for proper operation.

2.0L SOHC Engine With Manual Transaxle
See Figures 4 and 5
  1. Disconnect the negative battery cable from the left strut tower. The ground cable is equipped with a insulator grommet which should be placed on the stud to prevent the negative battery cable from accidentally grounding.
  2. Remove the air cleaner resonator.
  3. Remove the positive battery cable retaining nut from the starter.
  4. Disconnect the positive battery cable and alternator output wire from the starter.
  5. Disconnect the push-on solenoid connector from the starter.
  6. Remove the 2 bolts that attach the starter to the transaxle.
  7. Remove the starter from the vehicle.

14f147d.gif

Fig. Fig. 5: Starter motor wiring terminal connections-2.0L engine To install:
  1. Install the starter and the attaching bolts to the transaxle assembly.
  2. Tighten the attaching bolts to 40 ft. lbs. (54 Nm).

Clean all dirt and/or corrosion from the wire terminals before reconnecting the wiring to the solenoid.
  1. Reconnect the push-on solenoid connector to the starter.
  2. Reconnect the alternator output wire and positive battery cable to the starter and tighten the retaining nut to 90 inch lbs. (10 Nm).
  3. Install the air cleaner resonator.
  4. Reconnect the negative battery cable.

2.0L SOHC Engine With Automatic Transaxle; 2.4L Engine
See Figures 4, 5 and 6
  1. Disconnect the negative battery cable from the left strut tower. The ground cable is equipped with a insulator grommet which should be placed on the stud to prevent the negative battery cable from accidentally grounding.
  2. Remove the air cleaner resonator.
  3. Remove the 3 bolts attaching the Transmission Control Module (TCM). Do not disconnect the TCM wiring. Move the TCM to gain access to the upper starter mounting bolt.
  4. Remove the upper starter mounting bolt.
  5. Raise and safely support the vehicle.
  6. Remove the positive battery cable nut and disconnect the cable from the starter.
  7. Disconnect the push-on solenoid connector.
  8. Remove the lower mounting bolt that attaches the starter to the transaxle.
  9. Remove the starter from the vehicle.
  10. I need a diagram to find my aluternator - 2f4680e.jpg />
    2f4680e.jpg

    Fig. Fig. 6: Starter motor wiring terminal connections-2.0L SOHC engine with A/T; 2.4L engine To install:
    1. Install the starter onto the transaxle and the lower mounting bolt.
    2. Tighten the mounting bolts to 40 ft. lbs. (54 Nm).
    Before reconnecting the wiring to the starter solenoid, be sure to clean the wiring of any dirt or corrosion.
    1. Reconnect the positive battery cable to the solenoid post and tighten the retaining nut to 90 inch lbs. (10 Nm).
    2. Reconnect the push-on solenoid connector.
    3. Lower the vehicle.
    4. Reinstall the upper attaching bolt and torque to 40 ft. lbs. (54 Nm).
    5. Reinstall the TCM to its original location and install the mounting screws.
    6. Reinstall the air cleaner resonator.
    7. Reconnect the negative battery cable

    Hope helped.

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change an altenator on a 2005 dodge strstus


The best advise I can give you is go to Auto Zone or your local Auto parts store and purchase the Haynes Repair manual on your vehicle. 1. Disconnect the battery. 2. remove the Drive Belt. 3. Disconnect the the cables from the Alternator. 4 . Unbolt the alternator. Reverse the process to install the new unit.

Jul 17, 2010 | 2005 Dodge Stratus

1 Answer

I need an engine diagram for my 1998 dodge dakota sport 2.5 liter 4 cyl. PLEASE.


i'm assuming that you are talking about the firing order; for 1998 Dodge Dakota 2WD 2.5 liter L4 VIN "P"...

6867a7f.gif


Hope this help (remember comment and rated this post).

Apr 21, 2010 | 1998 Dodge Dakota

1 Answer

I need teh cylinder diagram for dodge ram 1500


You didn't mention engine size, so i have included diagrams for all 3 available engines...


f31070a.jpg


9108e8d.jpg

4be1d7a.jpg

Feb 16, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

How do you remove a window motor in a 06 strstus


have you verified it is the motor and not the switch,
if your sure its the motor you need to remove the door panel to see the pop rivets that hold the window transmission to the door,

Dec 26, 2009 | 2006 Dodge Stratus

1 Answer

I am changing the alternator in a 1998 dodge neon, need diagram


No diagram...
The pivot bolt is the long bolt that holds the alternator to the frame.
If you loosen it, the alternator can "swing" with the pivot bolt as its .... well, pivot, or swing center.

The long bolt must be removed completely in order to remove the alternator.

Be sure to doisconnect the negative cable from your battery.

Hope this hleps w/o a diagram.

Sep 14, 2009 | 1998 Dodge Neon

3 Answers

Wiring diagram for 1998 dodge ram 2500 pickup,


I have the wiring diagrams you need. Send me your email address and I will send them to you.
Outdoorsman592003@yahoo.com

Aug 25, 2009 | 1998 Dodge Ram 2500 2WD

1 Answer

Need Diagram of water pump on a 1998 Dodge Intrepid 2.7,


the water pump is timing chain driven and to replace it requires serious disassembly of the engine. it is a 13 + hour job and is not for the casual mechanic

Apr 13, 2009 | 1998 Dodge Intrepid

3 Answers

Vacuum hose diagram.dodge ram,1500,4x4,5.2l


Dodge 1998 1500 4x4 5.2 engine did a tune up cap wires rotor plugs routed wires as per diagram still having power problem when up to tempeture. I see a green vacume hose comming up on the drivers side of the distributer which has shat looks like a check valve on the end of it. followed it back to the transfer case. does the distributer end of it belong connected to something? Please Help Thanks!!!

Dec 17, 2008 | 1998 Dodge Ram 1500 4WD

4 Answers

Timing Belt


I want to know how to set point

Oct 08, 2008 | 1996 Dodge Stratus

Not finding what you are looking for?
1998 Dodge Stratus Logo

659 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...